Jump to content

Gasoline

From Niidae Wiki
Revision as of 17:42, 19 May 2025 by imported>PacificOcean275 (Added links)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Template:Short description Template:Redirect Template:Use dmy dates Template:Use American English

File:Gasoline in mason jar.jpg
Gasoline in a glass jar

Gasoline (North American English) or petrol (Commonwealth English) is a petrochemical product characterized as a transparent, yellowish, and flammable liquid normally used as a fuel for spark-ignited internal combustion engines. When formulated as a fuel for engines, gasoline is chemically composed of organic compounds derived from the fractional distillation of petroleum and later chemically enhanced with gasoline additives. It is a high-volume profitable product produced in crude oil refineries.<ref>Template:Cite book</ref>

The ability of a particular gasoline blend to resist premature ignition (which causes knocking and reduces efficiency in reciprocating engines) is measured by its octane rating. Tetraethyl lead was once widely used to increase the octane rating but is not used in modern automotive gasoline due to the health hazard. Aviation, off-road motor vehicles, and racing car engines still use leaded gasolines.<ref>Template:Cite web</ref><ref>Template:Cite web</ref> Other substances are frequently added to gasoline to improve chemical stability and performance characteristics, control corrosion, and provide fuel system cleaning. Gasoline may contain oxygen-containing chemicals such as ethanol, MTBE, or ETBE to improve combustion.

History and etymology

[edit]

Template:Main English dictionaries show that the term gasoline originates from gas plus the chemical suffixes -ole and -ine.<ref>Template:Cite Merriam-Webster</ref><ref>Template:Cite Dictionary.com</ref><ref>gasoline". Oxford English Dictionary. Oxford University Press, 2024.</ref> Petrol derives from the Medieval Latin word petroleum (L. petra, rock + oleum, oil).<ref>Template:Cite encyclopedia</ref>

Interest in gasoline-like fuels started with the invention of internal combustion engines suitable for use in transportation applications. The so-called Otto engines were developed in Germany during the last quarter of the 19th century. The fuel for these early engines was a relatively volatile hydrocarbon obtained from coal gas. With a boiling point near Template:Convert (n-octane boils at Template:Convert<ref name="CAS 111-65-9">Template:Cite web</ref>), it was well suited for early carburetors (evaporators). The development of a "spray nozzle" carburetor enabled the use of less volatile fuels. Further improvements in engine efficiency were attempted at higher compression ratios, but early attempts were blocked by the premature explosion of fuel, known as knocking. In 1891, the Shukhov cracking process became the world's first commercial method to break down heavier hydrocarbons in crude oil to increase the percentage of lighter products compared to simple distillation.

Chemical analysis and production

[edit]
File:GasolineComp.png
Some of the components of gasoline: isooctane, butane, 3-ethyltoluene, and the octane enhancer MTBE
File:Nodding donkey.jpg
A pumpjack in the United States
File:Gulf Offshore Platform.jpg
An oil rig in the Gulf of Mexico

Commercial gasoline as well as other liquid transportation fuels are complex mixtures of hydrocarbons.<ref>Template:Cite web</ref> The performance specification also varies with season, requiring less volatile blends during summer, in order to minimize evaporative losses.

Gasoline is produced in oil refineries. Roughly Template:Convert of gasoline is derived from a Template:Convert barrel of crude oil.<ref>Template:Cite web</ref> Material separated from crude oil via distillation, called virgin or straight-run gasoline, does not meet specifications for modern engines (particularly the octane rating; see below), but can be pooled to the gasoline blend.

The bulk of a typical gasoline consists of a homogeneous mixture of hydrocarbons with between four and twelve carbon atoms per molecule (commonly referred to as C4–C12).<ref name="Ullmann2">Werner Dabelstein, Arno Reglitzky, Andrea Schütze and Klaus Reders "Automotive Fuels" in Ullmann's Encyclopedia of Industrial Chemistry 2007, Wiley-VCH, Weinheim. Template:Doi</ref> It is a mixture of paraffins (alkanes), olefins (alkenes), napthenes (cycloalkanes), and aromatics. The use of the term paraffin in place of the standard chemical nomenclature alkane is particular to the oil industry (which relies extensively on jargon). The composition of a gasoline depends upon:

  • the oil refinery that makes the gasoline, as not all refineries have the same set of processing units;
  • the crude oil feed used by the refinery;
  • the grade of gasoline sought (in particular, the octane rating).

The various refinery streams blended to make gasoline have different characteristics. Some important streams include the following:

  • Straight-run gasoline, sometimes referred to as naphtha (and also light straight run naphtha "LSR" and light virgin naphtha "LVN"), is distilled directly from crude oil. Once the leading source of fuel, naphtha's low octane rating required organometallic fuel additives (primarily tetraethyllead) prior to their phaseout from the gasoline pool which started in 1975 in the United States.<ref>Template:Cite web</ref> Straight run naphtha is typically low in aromatics (depending on the grade of the crude oil stream) and contains some cycloalkanes (naphthenes) and no olefins (alkenes). Between 0 and 20 percent of this stream is pooled into the finished gasoline because the quantity of this fraction in the crude is less than fuel demand and the fraction's Research Octane Number (RON) is too low. The chemical properties (namely RON and Reid vapor pressure (RVP)) of the straight-run gasoline can be improved through reforming and isomerization. However, before feeding those units, the naphtha needs to be split into light and heavy naphtha. Straight-run gasoline can also be used as a feedstock for steam-crackers to produce olefins.
  • Reformate, produced from straight run gasoline in a catalytic reformer, has a high octane rating with high aromatic content and relatively low olefin content. Most of the benzene, toluene, and xylene (the so-called BTX hydrocarbons) are more valuable as chemical feedstocks and are thus removed to some extent. Also the BTX content is regulated.
  • Catalytic cracked gasoline, or catalytic cracked naphtha, produced with a catalytic cracker, has a moderate octane rating, high olefin content, and moderate aromatic content.
  • Hydrocrackate (heavy, mid, and light), produced with a hydrocracker, has a medium to low octane rating and moderate aromatic levels.
  • Alkylate is produced in an alkylation unit, using isobutane and C3-/C4-olefins as feedstocks. Finished alkylate contains no aromatics or olefins and has a high MON (Motor Octane Number) Alkylate was used during world war 2 in aviation fuel.<ref>Template:Cite web</ref> Since the late 1980s it is sold as a specialty fuel for (handheld) gardening and forestry tools with a combustion engine.<ref>Template:Cite web</ref><ref>Template:Cite web</ref>
  • Isomerate is obtained by isomerizing low-octane straight-run gasoline into iso-paraffins (non-chain alkanes, such as isooctane). Isomerate has a medium RON and MON, but no aromatics or olefins.
  • Butane is usually blended in the gasoline pool, although the quantity of this stream is limited by the RVP specification.
  • Oxygenates (more specifically alcohols and esters) are mostly blended into the pool in the US as ethanol. In Europe and other countries, the blends can contain ethanol in addition to Methyl tertiary-butyl ether (MTBE) and Ethyl tert-butyl ether (ETBE). MTBE in the United States was banned by most states in the early to mid 2000s.<ref>Template:Cite web</ref> A few countries still allow methanol as well to be blended directly into gasoline, especially in China.<ref>Template:Cite web</ref> More about oxygenates and blending is covered further in this article.

The terms above are the jargon used in the oil industry, and the terminology varies.

Currently, many countries set limits on gasoline aromatics in general, benzene in particular, and olefin (alkene) content. Such regulations have led to an increasing preference for alkane isomers, such as isomerate or alkylate, as their octane rating is higher than n-alkanes. In the European Union, the benzene limit is set at one percent by volume for all grades of automotive gasoline. This is usually achieved by avoiding feeding C6, in particular cyclohexane, to the reformer unit, where it would be converted to benzene. Therefore, only (desulfurized) heavy virgin naphtha (HVN) is fed to the reformer unit<ref name="hedl2">Template:Cite journal</ref>

Gasoline can also contain other organic compounds, such as organic ethers (deliberately added), plus small levels of contaminants, in particular organosulfur compounds (which are usually removed at the refinery).

On average, U.S. petroleum refineries produce about 19 to 20 gallons of gasoline, 11 to 13 gallons of distillate fuel diesel fuel and 3 to 4 gallons of jet fuel from each Template:Convert barrel of crude oil. The product ratio depends upon the processing in an oil refinery and the crude oil assay.<ref>Template:Cite web</ref>

Physical properties

[edit]
File:GasStationHiroshima.jpg
A Shell station in Hiroshima, Japan

Density

[edit]

The specific gravity of gasoline ranges from 0.71 to 0.77,<ref>Template:Cite web</ref> with higher densities having a greater volume fraction of aromatics.<ref>Template:Cite book</ref> Finished marketable gasoline is traded (in Europe) with a standard reference of Template:Convert, (7,5668 lb/ imp gal) its price is escalated or de-escalated according to its actual density.Template:Clarify Because of its low density, gasoline floats on water, and therefore water cannot generally be used to extinguish a gasoline fire unless applied in a fine mist.

Stability

[edit]

Template:More citations needed

Quality gasoline should be stable for six months if stored properly, but can degrade over time.<ref name=Stable>Template:Cite journal</ref> Gasoline stored for a year will most likely be able to be burned in an internal combustion engine without too much trouble.<ref name=Stable/> Gasoline should ideally be stored in an airtight container (to prevent oxidation or water vapor mixing in with the gas) that can withstand the vapor pressure of the gasoline without venting (to prevent the loss of the more volatile fractions) at a stable cool temperature (to reduce the excess pressure from liquid expansion and to reduce the rate of any decomposition reactions). When gasoline is not stored correctly, gums and solids may result, which can corrode system components and accumulate on wet surfaces, resulting in a condition called "stale fuel". Gasoline containing ethanol is especially subject to absorbing atmospheric moisture, then forming gums, solids, or two phases (a hydrocarbon phase floating on top of a water-alcohol phase).<ref name=Stable/>

The presence of these degradation products in the fuel tank or fuel lines plus a carburetor or fuel injection components makes it harder to start the engine or causes reduced engine performance <ref>Template:Cite journal</ref> On resumption of regular engine use, the buildup may or may not be eventually cleaned out by the flow of fresh gasoline. The addition of a fuel stabilizer to gasoline can extend the life of fuel that is not or cannot be stored properly, though removal of all fuel from a fuel system is the only real solution to the problem of long-term storage of an engine or a machine or vehicle. Typical fuel stabilizers are proprietary mixtures containing mineral spirits, isopropyl alcohol, 1,2,4-trimethylbenzene or other additives. Fuel stabilizers are commonly used for small engines, such as lawnmower and tractor engines, especially when their use is sporadic or seasonal (little to no use for one or more seasons of the year). Users have been advised to keep gasoline containers more than half full and properly capped to reduce air exposure, to avoid storage at high temperatures, to run an engine for ten minutes to circulate the stabilizer through all components prior to storage, and to run the engine at intervals to purge stale fuel from the carburetor.<ref name="Ullmann2" />

Gasoline stability requirements are set by the standard ASTM D4814. This standard describes the various characteristics and requirements of automotive fuels for use over a wide range of operating conditions in ground vehicles equipped with spark-ignition engines.

Combustion energy content

[edit]

A gasoline-fueled internal combustion engine obtains energy from the combustion of gasoline's various hydrocarbons with oxygen from the ambient air, yielding carbon dioxide and water as exhaust. The combustion of octane, a representative species, performs the chemical reaction:

Template:Chem2

By weight, combustion of gasoline releases about Template:Convert or by volume Template:Convert, quoting the lower heating value.<ref>Template:Cite web</ref> Gasoline blends differ, and therefore actual energy content varies according to the season and producer by up to 1.75 percent more or less than the average.<ref>Template:Cite web</ref> On average, about Template:Convert of gasoline are available from a barrel of crude oil (about 46 percent by volume), varying with the quality of the crude and the grade of the gasoline. The remainder is products ranging from tar to naphtha.<ref>Template:Cite web</ref>

A high-octane-rated fuel, such as liquefied petroleum gas (LPG), has an overall lower power output at the typical 10:1 compression ratio of an engine design optimized for gasoline fuel. An engine tuned for LPG fuel via higher compression ratios (typically 12:1) improves the power output. This is because higher-octane fuels allow for a higher compression ratio without knocking, resulting in a higher cylinder temperature, which improves efficiency. Also, increased mechanical efficiency is created by a higher compression ratio through the concomitant higher expansion ratio on the power stroke, which is by far the greater effect. The higher expansion ratio extracts more work from the high-pressure gas created by the combustion process. An Atkinson cycle engine uses the timing of the valve events to produce the benefits of a high expansion ratio without the disadvantages, chiefly detonation, of a high compression ratio. A high expansion ratio is also one of the two key reasons for the efficiency of diesel engines, along with the elimination of pumping losses due to throttling of the intake airflow.

The lower energy content of LPG by liquid volume in comparison to gasoline is due mainly to its lower density. This lower density is a property of the lower molecular weight of propane (LPG's chief component) compared to gasoline's blend of various hydrocarbon compounds with heavier molecular weights than propane. Conversely, LPG's energy content by weight is higher than gasoline's due to a higher hydrogen-to-carbon ratio.

Molecular weights of the species in the representative octane combustion are 114, 32, 44, and 18 for C8H18, O2, CO2, and H2O, respectively; therefore Template:Convert of fuel reacts with Template:Convert of oxygen to produce Template:Convert of carbon dioxide and Template:Convert of water.

Octane rating

[edit]

Template:Main

Spark-ignition engines are designed to burn gasoline in a controlled process called deflagration. However, the unburned mixture may autoignite by pressure and heat alone, rather than igniting from the spark plug at exactly the right time, causing a rapid pressure rise that can damage the engine. This is often referred to as engine knocking or end-gas knock. Knocking can be reduced by increasing the gasoline's resistance to autoignition, which is expressed by its octane rating. A detailed analysis further explores the conditions where premium fuel provides actual performance benefits versus when it is unnecessary.<ref>Template:Cite web</ref>

Octane rating is measured relative to a mixture of 2,2,4-trimethylpentane (an isomer of octane) and n-heptane. There are different conventions for expressing octane ratings, so the same physical fuel may have several different octane ratings based on the measure used. One of the best known is the research octane number (RON).

The octane rating of typical commercially available gasoline varies by country. In Finland, Sweden, and Norway, 95 RON is the standard for regular unleaded gasoline and 98 RON is also available as a more expensive option.

In the United Kingdom, over 95 percent of gasoline sold has 95 RON and is marketed as Unleaded or Premium Unleaded. Super Unleaded, with 97/98 RON and branded high-performance fuels (e.g., Shell V-Power, BP Ultimate) with 99 RON make up the balance. Gasoline with 102 RON may rarely be available for racing purposes.<ref>Template:Cite web</ref><ref>Template:Cite web</ref><ref>Template:Cite web</ref>

In the U.S., octane ratings in unleaded fuels vary between 85<ref>Template:Cite web</ref> and 87 AKI (91–92 RON) for regular, 89–90 AKI (94–95 RON) for mid-grade (equivalent to European regular), up to 90–94 AKI (95–99 RON) for premium (European premium).

91 92 93 94 95 96 97 98 99 100 101 102
Scandinavian Regular Premium
UK Regular Premium Super High-performance
USA Regular Mid-grade Premium

As South Africa's largest city, Johannesburg, is located on the Highveld at Template:Convert above sea level, the Automobile Association of South Africa recommends 95-octane gasoline at low altitude and 93-octane for use in Johannesburg because "The higher the altitude the lower the air pressure, and the lower the need for a high octane fuel as there is no real performance gain".<ref>Template:Cite web</ref>

Octane rating became important as the military sought higher output for aircraft engines in the late 1920s and the 1940s. A higher octane rating allows a higher compression ratio or supercharger boost, and thus higher temperatures and pressures, which translate to higher power output. Some scientistsTemplate:Who even predicted that a nation with a good supply of high-octane gasoline would have the advantage in air power. In 1943, the Rolls-Royce Merlin aero engine produced Template:Convert using 100 RON fuel from a modest Template:Convert displacement. By the time of Operation Overlord, both the RAF and USAAF were conducting some operations in Europe using 150 RON fuel (100/150 avgas), obtained by adding 2.5 percent aniline to 100-octane avgas.<ref name="Magazines19362">Template:Cite journal</ref> By this time, the Rolls-Royce Merlin 66 was developing Template:Convert using this fuel.

Additives

[edit]

Template:See also

Antiknock additives

[edit]

Tetraethyl lead

[edit]

Template:Main

Gasoline, when used in high-compression internal combustion engines, tends to auto-ignite or "detonate" causing damaging engine knocking (also called "pinging" or "pinking"). To address this problem, tetraethyl lead (TEL) was widely adopted as an additive for gasoline in the 1920s. With a growing awareness of the seriousness of the extent of environmental and health damage caused by lead compounds, however, and the incompatibility of lead with catalytic converters, governments began to mandate reductions in gasoline lead.

In the U.S., the Environmental Protection Agency issued regulations to reduce the lead content of leaded gasoline over a series of annual phases, scheduled to begin in 1973 but delayed by court appeals until 1976. By 1995, leaded fuel accounted for only 0.6 percent of total gasoline sales and under Template:Convert (Template:Convert) of lead per year. From 1 January 1996, the U.S. Clean Air Act banned the sale of leaded fuel for use in on-road vehicles in the U.S. The use of TEL also necessitated other additives, such as dibromoethane.

European countries began replacing lead-containing additives by the end of the 1980s, and by the end of the 1990s, leaded gasoline was banned within the entire European Union with an exception for Avgas 100LL for general aviation.<ref name="q566">Template:Cite web</ref> The UAE started to switch to unleaded in the early 2000s.<ref>Template:Cite web</ref>

Reduction in the average lead content of human blood may be a major cause for falling violent crime rates around the world<ref name="WashingtonPostCrime2">Template:Cite news</ref> including South Africa.<ref name="BusinessDayCrime2">Template:Cite web</ref> A study found a correlation between leaded gasoline usage and violent crime (see Lead–crime hypothesis).<ref name="Reyes2">Template:Cite web</ref><ref>Template:Cite news</ref> Other studies found no correlation.

In August 2021, the UN Environment Programme announced that leaded gasoline had been eradicated worldwide, with Algeria being the last country to deplete its reserves. UN Secretary-General António Guterres called the eradication of leaded petrol an "international success story". He also added: "Ending the use of leaded petrol will prevent more than one million premature deaths each year from heart disease, strokes and cancer, and it will protect children whose IQs are damaged by exposure to lead". Greenpeace called the announcement "the end of one toxic era".<ref>Template:Cite web</ref> However, leaded gasoline continues to be used in aeronautic, auto racing, and off-road applications.<ref>Template:Cite web</ref> The use of leaded additives is still permitted worldwide for the formulation of some grades of aviation gasoline such as 100LL, because the required octane rating is difficult to reach without the use of leaded additives.

Different additives have replaced lead compounds. The most popular additives include aromatic hydrocarbons, ethers (MTBE and ETBE), and alcohols, most commonly ethanol.

Lead replacement petrol

[edit]

Lead replacement petrol (LRP) was developed for vehicles designed to run on leaded fuels and incompatible with unleaded fuels. Rather than tetraethyllead, it contains other metals such as potassium compounds or methylcyclopentadienyl manganese tricarbonyl (MMT); these are purported to buffer soft exhaust valves and seats so that they do not suffer recession due to the use of unleaded fuel.

LRP was marketed during and after the phaseout of leaded motor fuels in the United Kingdom, Australia, South Africa, and some other countries.Template:Vague Consumer confusion led to a widespread mistaken preference for LRP rather than unleaded,<ref>Template:Cite news</ref> and LRP was phased out 8 to 10 years after the introduction of unleaded.<ref>Template:Cite news</ref>

Leaded gasoline was withdrawn from sale in Britain after 31 December 1999, seven years after EEC regulations signaled the end of production for cars using leaded gasoline in member states. At this stage, a large percentage of cars from the 1980s and early 1990s which ran on leaded gasoline were still in use, along with cars that could run on unleaded fuel. However, the declining number of such cars on British roads saw many gasoline stations withdrawing LRP from sale by 2003.<ref>Template:Cite news</ref>

MMT

[edit]

Methylcyclopentadienyl manganese tricarbonyl (MMT) is used in Canada and the U.S. to boost octane rating.<ref>Template:Cite web</ref> Its use in the U.S. has been restricted by regulations, although it is currently allowed.<ref>Template:Cite web</ref> Its use in the European Union is restricted by Article 8a of the Fuel Quality Directive<ref>Template:Cite web</ref> following its testing under the Protocol for the evaluation of effects of metallic fuel-additives on the emissions performance of vehicles.<ref>Template:Cite web</ref>

Fuel stabilizers (antioxidants and metal deactivators)

[edit]
File:Antioxidant.png
Substituted phenols and derivatives of phenylenediamine are common antioxidants used to inhibit gum formation in gasoline

Gummy, sticky resin deposits result from oxidative degradation of gasoline during long-term storage. These harmful deposits arise from the oxidation of alkenes and other minor components in gasolineTemplate:Citation needed (see drying oils). Improvements in refinery techniques have generally reduced the susceptibility of gasolines to these problems. Previously, catalytically or thermally cracked gasolines were most susceptible to oxidation. The formation of gums is accelerated by copper salts, which can be neutralized by additives called metal deactivators.

This degradation can be prevented through the addition of 5–100 ppm of antioxidants, such as phenylenediamines and other amines.<ref name="Ullmann2" /> Hydrocarbons with a bromine number of 10 or above can be protected with the combination of unhindered or partially hindered phenols and oil-soluble strong amine bases, such as hindered phenols. "Stale" gasoline can be detected by a colorimetric enzymatic test for organic peroxides produced by oxidation of the gasoline.<ref>Template:Patent</ref>

Gasolines are also treated with metal deactivators, which are compounds that sequester (deactivate) metal salts that otherwise accelerate the formation of gummy residues. The metal impurities might arise from the engine itself or as contaminants in the fuel.

Detergents

[edit]

Gasoline, as delivered at the pump, also contains additives to reduce internal engine carbon buildups, improve combustion and allow easier starting in cold climates. High levels of detergent can be found in Top Tier Detergent Gasolines. The specification for Top Tier Detergent Gasolines was developed by four automakers: GM, Honda, Toyota, and BMW. According to the bulletin, the minimal U.S. EPA requirement is not sufficient to keep engines clean.<ref>"Top Tier Detergent Gasoline (Deposits, Fuel Economy, No Start, Power, Performance, Stall Concerns)", GM Bulletin, 04-06-04-047, 06-Engine/Propulsion System, June 2004</ref> Typical detergents include alkylamines and alkyl phosphates at a level of 50–100 ppm.<ref name="Ullmann2" />

Ethanol

[edit]
File:Corn vs Ethanol production.webp
Corn vs Ethanol production in the United States Template:Legend Template:Legend Template:Legend-line

Template:See also

European Union

[edit]

Template:Unreferenced section In the EU, 5 percent ethanol can be added within the common gasoline spec (EN 228). Discussions are ongoing to allow 10 percent blending of ethanol (available in Finnish, French and German gasoline stations). In Finland, most gasoline stations sell 95E10, which is 10 percent ethanol, and 98E5, which is 5 percent ethanol. Most gasoline sold in Sweden has 5–15 percent ethanol added. Three different ethanol blends are sold in the Netherlands—E5, E10 and hE15. The last of these differs from standard ethanol–gasoline blends in that it consists of 15 percent hydrous ethanol (i.e., the ethanol–water azeotrope) instead of the anhydrous ethanol traditionally used for blending with gasoline.

From 2009 to 2022, renewable percentage in gasoline slowly increased from 5% to 10%, even though EU-produced ethanol can achieve a climate-neutral production capability and most EU cars can use E10. E10 availability is low even in larger countries like Germany (26%) and France (58%). 8 countries in the EU have not adopted E10 as of 2024.<ref>Template:Cite web</ref>

Brazil

[edit]

The Brazilian National Agency of Petroleum, Natural Gas and Biofuels (ANP) requires gasoline for automobile use to have 27.5 percent of ethanol added to its composition.<ref>Template:Cite web</ref> Pure hydrated ethanol is also available as a fuel.

Australia

[edit]

Template:See also Australia uses both E10 (up to 10% ethanol) and E85 (up to 85% ethanol) in its gasoline. New South Wales mandated biofuel in its Biofuels Act 2007, and Queensland had a biofuel mandate since 2017. Fuel pumps must be clearly labeled with its ethanol/biodiesel content.<ref>Template:Cite web</ref>

U.S.

[edit]

Template:Unreferenced section The federal Renewable Fuel Standard (RFS) effectively requires refiners and blenders to blend renewable biofuels (mostly ethanol) with gasoline, sufficient to meet a growing annual target of total gallons blended. Although the mandate does not require a specific percentage of ethanol, annual increases in the target combined with declining gasoline consumption have caused the typical ethanol content in gasoline to approach 10 percent. Most fuel pumps display a sticker that states that the fuel may contain up to 10 percent ethanol, an intentional disparity that reflects the varying actual percentage. In parts of the U.S., ethanol is sometimes added to gasoline without an indication that it is a component.

India

[edit]

In October 2007, the Government of India decided to make five percent ethanol blending (with gasoline) mandatory. Currently, 10 percent ethanol blended product (E10) is being sold in various parts of the country.<ref name="Government to take a call on ethanol price soon2">Template:Cite news</ref><ref name="India to raise ethanol blending in gasoline to 10%2">Template:Cite news</ref> Ethanol has been found in at least one study to damage catalytic converters.<ref>Template:Cite web</ref>

Dyes

[edit]

Template:Main

Though gasoline is a naturally colorless liquid, many gasolines are dyed in various colors to indicate their composition and acceptable uses. In Australia, the lowest grade of gasoline (RON 91) was dyed a light shade of red/orange, but is now the same color as the medium grade (RON 95) and high octane (RON 98), which are dyed yellow.<ref>Template:Cite web</ref> In the U.S., aviation gasoline (avgas) is dyed to identify its octane rating and to distinguish it from kerosene-based jet fuel, which is left colorless.<ref>Template:Cite web</ref> In Canada, the gasoline for marine and farm use is dyed red and is not subject to fuel excise tax in most provinces.<ref>Template:Cite web</ref>

Oxygenate blending

[edit]

Oxygenate blending adds oxygen-bearing compounds such as methanol, MTBE, ETBE, TAME, TAEE, ethanol, and biobutanol. The presence of these oxygenates reduces the amount of carbon monoxide and unburned fuel in the exhaust. In many areas throughout the U.S., oxygenate blending is mandated by EPA regulations to reduce smog and other airborne pollutants. For example, in Southern California fuel must contain two percent oxygen by weight, resulting in a mixture of 5.6 percent ethanol in gasoline. The resulting fuel is often known as reformulated gasoline (RFG) or oxygenated gasoline, or, in the case of California, California reformulated gasoline (CARBOB). The federal requirement that RFG contain oxygen was dropped on 6 May 2006 because the industry had developed VOC-controlled RFG that did not need additional oxygen.<ref>Template:Cite web</ref>

MTBE was phased out in the U.S. due to groundwater contamination and the resulting regulations and lawsuits. Ethanol and, to a lesser extent, ethanol-derived ETBE are common substitutes. A common ethanol-gasoline mix of 10 percent ethanol mixed with gasoline is called gasohol or E10, and an ethanol-gasoline mix of 85 percent ethanol mixed with gasoline is called E85. The most extensive use of ethanol takes place in Brazil, where the ethanol is derived from sugarcane. In 2004, over Template:Convert of ethanol was produced in the U.S. for fuel use, mostly from corn and sold as E10. E85 is slowly becoming available in much of the U.S., though many of the relatively few stations vending E85 are not open to the general public.<ref>Template:Cite web</ref>

The use of bioethanol and bio-methanol, either directly or indirectly by conversion of ethanol to bio-ETBE, or methanol to bio-MTBE is encouraged by the European Union Directive on the Promotion of the use of biofuels and other renewable fuels for transport. Since producing bioethanol from fermented sugars and starches involves distillation, though, ordinary people in much of Europe cannot legally ferment and distill their own bioethanol at present (unlike in the U.S., where getting a BATF distillation permit has been easy since the 1973 oil crisis).

Safety

[edit]
File:DOT hazmat class 3 (alt 3).svg
HAZMAT class 3 gasoline

Toxicity

[edit]

The safety data sheet for a 2003 Texan unleaded gasoline shows at least 15 hazardous chemicals occurring in various amounts, including benzene (up to five percent by volume), toluene (up to 35 percent by volume), naphthalene (up to one percent by volume), trimethylbenzene (up to seven percent by volume), methyl tert-butyl ether (MTBE) (up to 18 percent by volume, in some states), and about 10 others.<ref>Template:Cite web</ref> Hydrocarbons in gasoline generally exhibit low acute toxicities, with LD50 of 700–2700 mg/kg for simple aromatic compounds.<ref>Karl Griesbaum et al. "Hydrocarbons" in Ullmann's Encyclopedia of Industrial Chemistry 2005, Wiley-VCH, Weinheim. Template:Doi</ref> Benzene and many antiknocking additives are carcinogenic.

People can be exposed to gasoline in the workplace by swallowing it, breathing in vapors, skin contact, and eye contact. Gasoline is toxic. The National Institute for Occupational Safety and Health (NIOSH) has also designated gasoline as a carcinogen.<ref>Template:Cite web</ref> Physical contact, ingestion, or inhalation can cause health problems. Since ingesting large amounts of gasoline can cause permanent damage to major organs, a call to a local poison control center or emergency room visit is indicated.<ref>Template:Cite journal</ref>

Contrary to common misconception, swallowing gasoline does not generally require special emergency treatment, and inducing vomiting does not help, and can make it worse. According to poison specialist Brad Dahl, "even two mouthfuls wouldn't be that dangerous as long as it goes down to your stomach and stays there or keeps going". The U.S. CDC's Agency for Toxic Substances and Disease Registry says not to induce vomiting, lavage, or administer activated charcoal.<ref>Template:Citation</ref><ref>Template:Citation</ref>

Inhalation for intoxication

[edit]

Inhaled (huffed) gasoline vapor is a common intoxicant. Users concentrate and inhale gasoline vapor in a manner not intended by the manufacturer to produce euphoria and intoxication. Gasoline inhalation has become epidemic in some poorer communities and indigenous groups in Australia, Canada, New Zealand, and some Pacific Islands.<ref name="gasoline Sniffing Fact File2">Template:Cite web</ref> The practice is thought to cause severe organ damage, along with other effects such as intellectual disability and various cancers.<ref>Template:Cite journal</ref><ref>Template:Cite web</ref><ref>Template:Cite web</ref><ref>Template:Cite web</ref>

In Canada, Native children in the isolated Northern Labrador community of Davis Inlet were the focus of national concern in 1993, when many were found to be sniffing gasoline. The Canadian and provincial Newfoundland and Labrador governments intervened on several occasions, sending many children away for treatment. Despite being moved to the new community of Natuashish in 2002, serious inhalant abuse problems have continued. Similar problems were reported in Sheshatshiu in 2000 and also in Pikangikum First Nation.<ref>Template:Cite web</ref> In 2012, the issue once again made the news media in Canada.<ref>Template:Cite web</ref>

Template:See also

Australia has long faced a petrol (gasoline) sniffing problem in isolated and impoverished aboriginal communities. Although some sources argue that sniffing was introduced by U.S. servicemen stationed in the nation's Top End during World War II<ref>Template:Cite journal</ref> or through experimentation by 1940s-era Cobourg Peninsula sawmill workers,<ref>Template:Cite journal</ref> other sources claim that inhalant abuse (such as glue inhalation) emerged in Australia in the late 1960s.<ref>Template:Cite report</ref> Chronic, heavy petrol sniffing appears to occur among remote, impoverished indigenous communities, where the ready accessibility of petrol has helped to make it a common substance for abuse.

In Australia, petrol sniffing now occurs widely throughout remote Aboriginal communities in the Northern Territory, Western Australia, northern parts of South Australia, and Queensland.<ref>Template:Cite news</ref> The number of people sniffing petrol goes up and down over time as young people experiment or sniff occasionally. "Boss", or chronic, sniffers may move in and out of communities; they are often responsible for encouraging young people to take it up.<ref>Template:Cite web</ref> In 2005, the Government of Australia and BP Australia began the usage of Opal fuel in remote areas prone to petrol sniffing.<ref>Template:Cite web</ref> Opal is a non-sniffable fuel (which is much less likely to cause a high) and has made a difference in some indigenous communities.

Flammability

[edit]
File:Gasoline-fire.png
Uncontrolled burning of gasoline produces large quantities of soot and carbon monoxide.

Gasoline is flammable with low flash point of Template:Convert. Gasoline has a lower explosive limit of 1.4 percent by volume and an upper explosive limit of 7.6 percent. If the concentration is below 1.4 percent, the air-gasoline mixture is too lean and does not ignite. If the concentration is above 7.6 percent, the mixture is too rich and also does not ignite. However, gasoline vapor rapidly mixes and spreads with air, making unconstrained gasoline quickly flammable.

Gasoline exhaust

[edit]

The exhaust gas generated by burning gasoline is harmful to both the environment and to human health. After CO is inhaled into the human body, it readily combines with hemoglobin in the blood, and its affinity is 300 times that of oxygen. Therefore, the hemoglobin in the lungs combines with CO instead of oxygen, causing the human body to be hypoxic, causing headaches, dizziness, vomiting, and other poisoning symptoms. In severe cases, it may lead to death.<ref>Template:Cite web</ref><ref>Template:Cite web</ref> Hydrocarbons only affect the human body when their concentration is quite high, and their toxicity level depends on the chemical composition. The hydrocarbons produced by incomplete combustion include alkanes, aromatics, and aldehydes. Among them, a concentration of methane and ethane over Template:Convert will cause loss of consciousness or suffocation, a concentration of pentane and hexane over Template:Convert will have an anesthetic effect, and aromatic hydrocarbons will have more serious effects on health, blood toxicity, neurotoxicity, and cancer. If the concentration of benzene exceeds 40 ppm, it can cause leukemia, and xylene can cause headache, dizziness, nausea, and vomiting. Human exposure to large amounts of aldehydes can cause eye irritation, nausea, and dizziness. In addition to carcinogenic effects, long-term exposure can cause damage to the skin, liver, kidneys, and cataracts.<ref name="x-engineer.org">Template:Cite web</ref> After NOx enters the alveoli, it has a severe stimulating effect on the lung tissue. It can irritate the conjunctiva of the eyes, cause tearing, and cause pink eyes. It also has a stimulating effect on the nose, pharynx, throat, and other organs. It can cause acute wheezing, breathing difficulties, red eyes, sore throat, and dizziness causing poisoning.<ref name="x-engineer.org" /><ref>Template:Cite web</ref> Fine particulates are also dangerous to health.<ref name="canada-2015">Template:Cite web</ref>

Environmental effect

[edit]

The air pollution in many large cities has changed from coal-burning pollution to "motor vehicle pollution". In the U.S., transportation is the largest source of carbon emissions, accounting for 30 percent of the total carbon footprint of the U.S.<ref>Template:Cite web</ref> Combustion of gasoline produces Template:Convert of carbon dioxide, a greenhouse gas.<ref>Template:Cite magazine</ref><ref name="US Energy Information Administration2">Template:Citation-attribution</ref>

Unburnt gasoline and evaporation from the tank, when in the atmosphere, react in sunlight to produce photochemical smog. Vapor pressure initially rises with some addition of ethanol to gasoline, but the increase is greatest at 10 percent by volume.<ref>Template:Cite journal</ref> At higher concentrations of ethanol above 10 percent, the vapor pressure of the blend starts to decrease. At a 10 percent ethanol by volume, the rise in vapor pressure may potentially increase the problem of photochemical smog. This rise in vapor pressure could be mitigated by increasing or decreasing the percentage of ethanol in the gasoline mixture. The chief risks of such leaks come not from vehicles, but gasoline delivery truck accidents and leaks from storage tanks. Because of this risk, most (underground) storage tanks now have extensive measures in place to detect and prevent any such leaks, such as monitoring systems (Veeder-Root, Franklin Fueling).

Production of gasoline consumes Template:Convert of water by driven distance.<ref>Template:Cite web</ref>

Gasoline use causes a variety of deleterious effects to the human population and to the climate generally. The harms imposed include a higher rate of premature death and ailments, such as asthma, caused by air pollution, higher healthcare costs for the public generally, decreased crop yields, missed work and school days due to illness, increased flooding and other extreme weather events linked to global climate change, and other social costs. The costs imposed on society and the planet are estimated to be $3.80 per gallon of gasoline, in addition to the price paid at the pump by the user. The damage to the health and climate caused by a gasoline-powered vehicle greatly exceeds that caused by electric vehicles.<ref>Template:Cite web</ref><ref>Template:Cite journal</ref>

Gasoline can be released into the environment as an uncombusted liquid fuel, as a flammable liquid, or as a vapor by way of leakages occurring during its production, handling, transport and delivery.<ref>Template:Cite web</ref> Gasoline contains known carcinogens,<ref>Template:Cite web</ref><ref>Template:Cite journal</ref><ref>Template:Cite journal</ref> and gasoline exhaust is a health risk.<ref name="canada-2015" /> Gasoline is often used as a recreational inhalant and can be harmful or fatal when used in such a manner.<ref>Template:Cite web</ref> When burned, Template:Convert of gasoline emits about Template:Convert of Template:CO2, a greenhouse gas, contributing to human-caused climate change.<ref>Template:Cite web</ref><ref>Template:Cite journal</ref> Oil products, including gasoline, were responsible for about 32% of Template:CO2 emissions worldwide in 2021.<ref>Template:Cite journal</ref>

Carbon dioxide

[edit]

About Template:Convert of carbon dioxide (CO2) are produced from burning gasoline that does not contain ethanol.<ref name="US Energy Information Administration2" /> Most of the retail gasoline now sold in the U.S. contains about 10 percent fuel ethanol (or E10) by volume.<ref name="US Energy Information Administration2" /> Burning E10 produces about Template:Convert of CO2 that is emitted from the fossil fuel content. If the CO2 emissions from ethanol combustion are considered, then about Template:Convert of CO2 are produced when E10 is combusted.<ref name="US Energy Information Administration2" />

Worldwide 7 liters of gasoline are burnt for every 100 km driven by cars and vans.<ref name="IEA 2021">Template:Cite web</ref>

In 2021, the International Energy Agency stated, "To ensure fuel economy and CO2 emissions standards are effective, governments must continue regulatory efforts to monitor and reduce the gap between real-world fuel economy and rated performance."<ref name="IEA 2021" />

Contamination of soil and water

[edit]

Gasoline enters the environment through the soil, groundwater, surface water, and air. Therefore, humans may be exposed to gasoline through methods such as breathing, eating, and skin contact. For example, using gasoline-filled equipment, such as lawnmowers, drinking gasoline-contaminated water close to gasoline spills or leaks to the soil, working at a gasoline station, inhaling gasoline volatile gas when refueling at a gasoline station is the easiest way to be exposed to gasoline.<ref>Template:Cite web</ref>

Use and pricing

[edit]

Template:MainThe International Energy Agency said in 2021 that "road fuels should be taxed at a rate that reflects their impact on people's health and the climate".<ref name="IEA 2021"/>

Europe

[edit]

Countries in Europe impose substantially higher taxes on fuels such as gasoline when compared to the U.S. The price of gasoline in Europe is typically higher than that in the U.S. due to this difference.<ref>Template:Cite journal</ref>

U.S.

[edit]

Template:Update section

File:USRegularGasolinePricesUpto2019.png
U.S. Regular Gasoline Prices through 2018
File:RBOB Gasoline Prices.webp
Template:Center RBOB plus excise taxes on gasoline reflect prices paid at the pump

From 1998 to 2004, the price of gasoline fluctuated between Template:Convert.<ref name="FE.gov2">Template:Cite web</ref> After 2004, the price increased until the average gasoline price reached a high of Template:Convert in mid-2008 but receded to approximately Template:Convert by September 2009.<ref name="FE.gov2" /> The U.S. experienced an upswing in gasoline prices through 2011,<ref name="taxfoundation.org2">Template:Cite web</ref> and, by 1 March 2012, the national average was Template:Convert. California prices are higher because the California government mandates unique California gasoline formulas and taxes.<ref>Template:Cite web</ref>

In the U.S., most consumer goods bear pre-tax prices, but gasoline prices are posted with taxes included. Taxes are added by federal, state, and local governments. Template:As of, the federal tax was Template:Convert for gasoline and Template:Convert for diesel (excluding red diesel).<ref>Template:Cite web</ref>

About nine percent of all gasoline sold in the U.S. in May 2009 was premium grade, according to the Energy Information Administration. Consumer Reports magazine says, "If [your owner's manual] says to use regular fuel, do so—there's no advantage to a higher grade."<ref>Template:Cite web</ref> The Associated Press said premium gas—which has a higher octane rating and costs more per gallon than regular unleaded—should be used only if the manufacturer says it is "required".<ref>Template:Cite web</ref> Cars with turbocharged engines and high compression ratios often specify premium gasoline because higher octane fuels reduce the incidence of "knock", or fuel pre-detonation.<ref>Template:Cite web</ref> The price of gasoline varies considerably between the summer and winter months.<ref>Template:Cite web</ref>

There is a considerable difference between summer oil and winter oil in gasoline vapor pressure (Reid Vapor Pressure, RVP), which is a measure of how easily the fuel evaporates at a given temperature. The higher the gasoline volatility (the higher the RVP), the easier it is to evaporate. The conversion between the two fuels occurs twice a year, once in autumn (winter mix) and the other in spring (summer mix). The winter blended fuel has a higher RVP because the fuel must be able to evaporate at a low temperature for the engine to run normally. If the RVP is too low on a cold day, the vehicle will be difficult to start; however, the summer blended gasoline has a lower RVP. It prevents excessive evaporation when the outdoor temperature rises, reduces ozone emissions, and reduces smog levels. At the same time, vapor lock is less likely to occur in hot weather.<ref>Template:Cite web</ref>

Gasoline production by country

[edit]
Gasoline production (per day; 2014)<ref>Template:Cite web</ref>
Country Gasoline production
Barrels
(thousands)
m3
(thousands)
ft3
(thousands)
kL
U.S. Template:Convert
China Template:Convert
Japan Template:Convert
Russia Template:Convert
India Template:Convert
Canada Template:Convert
Brazil Template:Convert
Germany Template:Convert
Saudi Arabia Template:Convert
Mexico Template:Convert
South Korea Template:Convert
Iran Template:Convert
UK Template:Convert
Italy Template:Convert
Venezuela Template:Convert
France Template:Convert
Singapore Template:Convert
Australia Template:Convert
Indonesia Template:Convert
Taiwan Template:Convert
Thailand Template:Convert
Spain Template:Convert
Netherlands Template:Convert
South Africa Template:Convert
Argentina Template:Convert
Sweden Template:Convert
Greece Template:Convert
Belgium Template:Convert
Malaysia Template:Convert
Finland Template:Convert
Belarus Template:Convert
Turkey Template:Convert
Colombia Template:Convert
Poland Template:Convert
Norway Template:Convert
Kazakhstan Template:Convert
Algeria Template:Convert
Romania Template:Convert
Oman Template:Convert
Egypt Template:Convert
UAE Template:Convert
Chile Template:Convert
Turkmenistan Template:Convert
Kuwait Template:Convert
Iraq Template:Convert
Vietnam Template:Convert
Lithuania Template:Convert
Denmark Template:Convert
Qatar Template:Convert

Comparison with other fuels

[edit]

Template:More citations needed sectionTemplate:See also

Below is a table of the energy density (per volume) and specific energy (per mass) of various transportation fuels as compared with gasoline. In the rows with gross and net, they are from the Oak Ridge National Laboratory's Transportation Energy Data Book.<ref name="TEDB2">Template:Cite web</ref>

Fuel type Energy density Specific energy RON
Gross Net Gross Net
MJ/L BTUTemplate:\U.S. gal MJ/L BTUTemplate:\U.S. gal MJ/kg BTU/lb MJ/kg BTU/lb
Gasoline Template:Convert Template:Convert Template:Convert<ref name="Thomas2">Template:Cite web Template:Small. Livermore, California. Sandia National Laboratories. 2000.</ref> Template:Convert 91–98
Autogas (LPG)Template:Efn Template:Convert Template:Convert 108
Ethanol Template:Convert<ref name="Thomas2" /> Template:Convert Template:Convert<ref name="Thomas2" /> Template:Convert 108.7<ref name="Fuel 89 (2010) 2713-27202">Template:Cite journal</ref>
Methanol Template:Convert Template:Convert Template:Convert Template:Convert 123
Butanol Template:Convert Template:Convert 91–99Template:Clarify
Gasohol Template:Convert Template:Convert 93–94Template:Clarify
DieselTemplate:Efn Template:Convert Template:Convert Template:Convert Template:Convert 25
Biodiesel Template:Convert<ref>Template:Cite web</ref>Template:Clarify Template:Convert
Avgas Template:Convert Template:Convert Template:Convert Template:Convert
Jet A Template:Convert Template:Convert
Jet B Template:Convert Template:Convert
LNG Template:Convert Template:Convert
LPG Template:Convert Template:Convert Template:Convert Template:Convert
CGH2Template:Efn Template:Convert Template:Convert<ref>Template:Cite web</ref> Template:Convert Template:Convert

See also

[edit]

Template:PortalChevron published a free high-quality technical guide Motor Gasolines Technical Review using common language that explains gasoline production, blending, and combustion in an engine. The report covers the US and other locations globally. Template:Cmn

Explanatory notes

[edit]

Template:Notelist

References

[edit]

Template:Reflist

Bibliography

[edit]

Template:Refbegin

Template:Refend

[edit]

Template:Commons Template:Wiktionary

Images

Template:Motor fuel Template:Portal bar Template:Authority control