Editing Isochronous burst transmission

{{Short description|Method of transmitting data at a lower rate than the bearer signalling rate}}
{{One source|date=October 2019}}
'''Isochronous burst transmission''' is a method of  transmission.  In a [[data]] [[telecommunications network|network]] where the [[information-bearer channel]] rate is higher than the input [[data signaling rate]], [[transmission (telecommunications)|transmission]] is performed by <nowiki>interrupting</nowiki>, at controlled intervals, the [[data stream]] being transmitted.

''Note 1:'' [[Burst transmission]] in [[isochronous]] form enables communication between [[data terminal equipment]] (DTE) and data networks that operate at dissimilar data signaling rates, such as when the information-bearer channel rate is higher than the DTE output data signaling rate.

''Note 2:''  The [[binary code|binary]] digits are transferred at the information-bearer channel rate. The [[data transfer]] is interrupted at intervals in order to produce the required average data signaling rate.

''Note 3:''  The interruption is always for an integral number of unit intervals.

''Note 4:''  Isochronous burst transmission has particular application where envelopes are being transferred between [[data circuit terminating equipment]] (DCE) and only the bytes contained within the envelopes are being transferred between the DCE and the DTE. ''Synonyms'': '''burst isochronous''' ''(deprecated)'', '''interrupted isochronous transmission.'''<ref>{{Cite web|url=https://www.its.bldrdoc.gov/fs-1037/fs-1037c.htm|title=Federal Standard 1037C: Glossary of Telecommunications Terms}}</ref>

==References==
{{Reflist}}
{{FS1037C MS188}}

[[Category:Quantized radio modulation modes]]