Editing Creosote

{{Short description|Tar distillation byproduct used as wood preservative}}
{{Other uses}}
{{use mdy dates|cs1-dates=ly|date=March 2024}}
[[File:RailroadTiesBeforeAfterCreosoteSantaFeRRAlbuquerqueNM.jpg|thumb|upright=1.8|Wood railroad ties before (right) and after (left) infusion with creosote, being transported by railcar at a facility of the [[Santa Fe Railroad]], in [[Albuquerque, New Mexico]], in March 1943. This U.S. wartime governmental photo reports that "The steaming black ties in the [left of photo]... have just come from the retort where they have been infused with creosote for eight hours." Ties are "made of pine and fir... seasoned for eight months" [as seen in the untreated railcar load at right].<ref name=Delnao/>]]

'''Creosote''' is a category of carbonaceous chemicals formed by the [[distillation]] of various [[tar]]s and [[pyrolysis]] of plant-derived material, such as wood, or fossil fuel. They are typically used as [[preservative]]s or [[antiseptic]]s.<ref name=overton7/>

Some creosote types were used historically as a treatment for components of seagoing and outdoor wood structures to prevent rot (e.g., bridgework and [[railroad tie]]s, see image). Samples may be found commonly inside chimney [[flue]]s, where the coal or wood burns under variable conditions, producing soot and tarry smoke. Creosotes are the principal chemicals responsible for the stability, scent, and flavor characteristic of smoked meat; the name is derived {{etymology|gre|''κρέας'' (kreas)|meat||''σωτήρ'' (sōtēr)|preserver}}.<ref name=schorlemmer152/>

The two main kinds recognized in industry are '''[[coal tar|coal-tar]] creosote''' and '''[[tar|wood-tar]] creosote'''. The coal-tar variety, having stronger and more toxic properties, has chiefly been used as a preservative for wood; coal-tar creosote was also formerly used as an [[escharotic]], to burn malignant skin tissue, and in dentistry, to prevent [[necrosis]], before its [[carcinogen]]ic properties became known.<ref>{{cite web |publisher=ATSDR - Agency for Toxic Substances and Disease Registry |title=ToxFAQs for Creosote |website=Toxic Substances Portal |url=https://wwwn.cdc.gov/TSP/ToxFAQs/ToxFAQsDetails.aspx?faqid=65&toxid=18 |access-date=2023-04-07}}</ref><ref>{{cite web |title=Coal Tar and Coal-Tar Pitch |publisher=National Cancer Institute |website=cancer.gov |date=2015-03-20 |url=https://www.cancer.gov/about-cancer/causes-prevention/risk/substances/coal-tar |access-date=2020-11-24}}</ref> The wood-tar variety has been used for meat preservation, ship treatment, and such medical purposes as an [[anaesthetic]], [[antiseptic]], [[astringent]], [[expectorant]], and [[laxative]], though these have mostly been replaced by modern formulations.{{Citation needed|date=January 2018}}

Varieties of creosote have also been made from both [[oil shale]] and [[petroleum]], and are known as '''oil-tar creosote''' when derived from oil tar, and as '''water-gas-tar creosote''' when derived from the tar of [[water gas]].{{Citation needed|date=January 2018}} Creosote also has been made from pre-coal formations such as [[lignite]], yielding '''lignite-tar creosote''', and [[peat]], yielding '''peat-tar creosote'''.{{Citation needed|date=January 2018}}

{{TOC limit|3}}

==Creosote oils==
The term creosote has a broad range of definitions depending on the origin of the coal tar oil and end-use of the material.

With respect to [[wood preservation|wood preservative]]s, the United States Environmental Protection Agency (EPA) considers the term ''creosote'' to mean a [[pesticide]] for use as a wood preservative meeting the American Wood Protection Association (AWPA) Standards P1/P13 and P2.<ref>Communication between United States Environmental Protection Agency and the Creosote Council.{{Full citation needed|date=April 2019}}</ref> The AWPA Standards require that creosote "shall be a pure coal tar product derived entirely from tar produced by the [[carbonization]] of bituminous coal."<ref name="United States Environmental Protection Agency-2008"/><ref name=ReferenceA>{{cite book |publisher=American Wood Protection Association |title=2013 AWPA Book of Standards}}</ref>

Currently, all creosote-treated wood products—foundation and [[deep foundation#Timber|marine pilings]], lumber, posts, [[railroad tie]]s, timbers, and utility poles—are manufactured using this type of wood preservative. The manufacturing process can only be a pressure process under the supervision of a licensed applicator certified by the State Departments of Agriculture. No brush-on, spray, or non-pressure uses of creosote are allowed, as specified by the EPA-approved label for the use of creosote.<ref name="United States Environmental Protection Agency-2008"/>

The use of creosote according to the AWPA Standards does not allow for mixing with other types of "creosote type" materials—such as lignite-tar creosote, oil-tar creosote, peat-tar creosote, water-gas-tar creosote, or wood-tar creosote. The AWPA Standard P3 does however, allow blending of a high-boiling petroleum oil meeting the AWPA Standard P4.<ref name=ReferenceA/><ref name=MacLean1952/>

The information that follows describing the other various types of creosote materials and its uses should be considered as primarily being of only historical value.{{citation needed|date=December 2017}} This history is important, because it traces the origin of these different materials used during the 19th and early 20th centuries. Furthermore, it must be considered that these other types of creosotes – lignite-tar, wood-tar, water-gas-tar, etc. – are not currently{{when|date=December 2017}} being manufactured and have either been replaced with more-economical materials, or replaced by products that are more efficacious or safer.{{citation needed|date=December 2017}}

For some part of their history, coal-tar creosote and wood-tar creosote were thought to have been equivalent substances—albeit of distinct origins—accounting for their common name; the two were determined only later to be chemically different. All types of creosote are composed of [[phenol]] derivatives and share some quantity of monosubstituted phenols,<ref name=roscoe37/> but these are not the only active element of creosote. For their useful effects, coal-tar creosote relies on the presence of [[naphthalene]]s and [[anthracene]]s, while wood-tar creosote relies on the presence of methyl ethers of phenol. Otherwise, either type of tar would dissolve in water.

Creosote was first discovered in its wood-tar form in 1832, by [[Carl Reichenbach]], when he found it both in the tar and in [[pyroligneous acid]]s obtained by a [[dry distillation]] of beechwood. Because pyroligneous acid was known as an [[antiseptic]] and meat [[preservative]], Reichenbach conducted experiments by dipping meat in a dilute solution of distilled creosote. He found that the meat was dried without undergoing [[putrefaction]] and had attained a smoky flavor.<ref name=roscoe33/> This led him to reason that creosote was the antiseptic component contained in smoke, and he further argued that the creosote he had found in wood tar was also in coal tar, as well as amber tar and animal tar, in the same abundance as in wood tar.<ref name=schorlemmer152/>

Soon afterward, in 1834, [[Friedrich Ferdinand Runge]] discovered carbolic acid ([[phenol]]) in coal-tar, and [[Auguste Laurent]] obtained it from "phenylhydrate", which was soon determined to be the same compound. There was no clear view on the relationship between carbolic acid and creosote; Runge described it as having similar caustic and antiseptic properties, but noted that it was different, in that it was an acid and formed salts. Nonetheless, Reichenbach argued that creosote was also the active element, as it was in pyroligneous acid. Despite evidence to the contrary, his view held sway with most chemists, and it became commonly accepted wisdom that creosote, carbolic acid, and phenylhydrate were identical substances, with different degrees of purity.<ref name=schorlemmer152/>

Carbolic acid was soon commonly sold under the name "creosote", and the scarcity of wood-tar creosote in some places led chemists to believe that it was the same substance as that described by Reichenbach. In the 1840s, [[Eugen Freiherr von Gorup-Besanez]], after realizing that two samples of substances labelled as creosote were different, started a series of investigations to determine the chemical nature of carbolic acid, leading to a conclusion that it more resembled chlorinated quinones and must have been a different, entirely unrelated substance.

Independently, there were investigations into the chemical nature of creosote. A study by [[Friedrich Karl Völkel|F.K. Völkel]] revealed that the smell of purified creosote resembled that of [[guaiacol]], and later studies by [[Heinrich Hlasiwetz]] identified a substance common to guaiacum and creosote that he called creosol, and he determined that creosote contained a mixture of creosol and guaiacol. Later investigations by Gorup-Besanez, [[A.E. Hoffmann]], and [[Siegfried Marasse]] showed that wood-tar creosote also contained phenols, giving it a feature in common with coal-tar creosote.<ref name=schorlemmer153/>

Historically, coal-tar creosote has been distinguished from what was thought of as creosote proper—the original substance of Reichenbach's discovery—and it has been referred to specifically as "creosote oil". But, because creosote from coal-tar and wood-tar are obtained from a similar process and have some common uses, they have also been placed in the same class of substances, with the terms "creosote" or "creosote oil" referring to either product.<ref name=overton7/>

===Wood-tar creosote===
{| style="background:#F9F9F9; border:1px solid #AAA; padding:5px; float:right; margin-left:20px;"
|
{| style="font-size:12px; text-align:right;"
|+ style="text-align:left; padding-left:5px; padding-bottom:10px; font-size:13.5px;" | Constituency of distillations of creosote from different woods at different temperatures<ref name=allen353/><ref name=apa1073/><ref name=rcs294/>
! scope="col" style="font-size:13px;" |
! scope="col" colspan="2" style="font-size:13px; padding-left:20px; text-align:center; border-bottom:1px solid #AAA;" | [[Beech]]
! scope="col" style="font-size:13px; padding-left:20px; text-align:center; border-bottom:1px solid #AAA;" | [[Oak]]
! scope="col" style="font-size:13px; padding-left:20px; text-align:center; border-bottom:1px solid #AAA;" | [[Pine]]
|-
! scope="row" style="font-size:11px;" |
! scope="col" style="padding-left:20px;" | 200&ndash;220&nbsp;°C
! scope="col" style="padding-left:20px;" | 200&ndash;210&nbsp;°C
! scope="col" style="padding-left:20px;" | 200&ndash;210&nbsp;°C
! scope="col" style="padding-left:20px;" | 200&ndash;210&nbsp;°C
|-
! scope="row" style="text-align:left;" | [[Monophenols]]
| 39.0 %|| 39.0 %|| 55.0 %|| 40.0%
|-
! scope="row" style="text-align:left;" | [[Guaiacol]]
| 19.7 %|| 26.5 %|| 14.0 %|| 20.3%
|-
! scope="row" style="text-align:left;" | [[Creosol]] and [[Homologous series|homologs]]
| 40.0% || 32.1% || 31.0% || 37.5%
|-
! scope="row" style="text-align:left;" | Loss
| 1.3% || 2.4% || . . . || 2.2%
|-
|}
|}
Wood-tar creosote is a colourless to yellowish greasy liquid with a smoky odor, produces a sooty flame when burned, and has a burned taste. It is non-buoyant in water, with a [[specific gravity]] of 1.037 to 1.087, retains fluidity at a very low temperature, and boils at 205-225&nbsp;°C. In its purest form, it is transparent. Dissolution in water requires up to 200 times the amount of water as the base creosote.<ref name=nickels614/> This creosote is a combination of natural [[phenols]]: primarily [[guaiacol]] and [[creosol]] (4-methylguaiacol), which typically constitutes 50% of the oil; second in prevalence are [[cresol]] and [[xylenol]]; the rest being a combination of [[monophenols]] and [[polyphenol]]s.
{| style="background:#F9F9F9; border:1px solid #AAA; padding:5px; float:left; margin-right:20px;"
|
{| class="sortable" style="font-size:12px; text-align:right;"
|+ style="text-align:left; padding-left:5px; padding-bottom:10px; font-size:13.5px;" | Composition of a typical beech-tar creosote<ref name=allen353/><ref name=lee1483/>
! class="unsortable" style="text-align:left; padding-right:20px;" |
| class="unsortable" |
|
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Phenol]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|C6H5OH}}
| 5.2%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[o-Cresol]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|(CH3)C6H4(OH)}}
| 10.4%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[m-Cresol]] and [[p-cresol]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|(CH3)C6H4(OH)}}
| 11.6%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[2-Ethylphenol]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|C6H4(C2H5)OH}}
| 3.6%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Guaiacol]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|C6H4(OH)(OCH3)}}
| 25.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | 3,4-[[Xylenol]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|C6H3(CH3)2OH}}
| 2.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[3,5-Xylenol]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|C6H3(CH3)2OH}}
| 1.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | Various phenols
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|C6H5OH}}&mdash;
| 6.2%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Creosol]] and [[Homologous series|homologs]]
| class="unsortable" style="text-align:left; padding-right:20px;" | {{chem2|C6H3(CH3)(OH)(OCH3)}}&mdash;
| 35.0%
|-
|}
|}
The simple phenols are not the only active element in wood-tar creosote. In solution, they [[coagulation|coagulate]] [[albumin]], which is a water-soluble protein found in meat, so they serve as a preserving agent, but also cause denaturation. Most of the phenols in the creosote are [[methoxy]] derivatives: they contain the [[methoxy group]] {{chem2|(\sO\sCH3)}} linked to the [[benzene]] nucleus. The high level of methyl derivates created from the action of heat on wood (also apparent in the methyl alcohol produced through distillation) make wood-tar creosote substantially different from coal-tar creosote. Guaiacol is a [[methyl group|methyl]] [[ether]] of [[pyrocatechin]], while creosol is a methyl ether of methyl-pyrocatechin, the next [[Homologous series|homolog]] of pyrocatechin. Methyl ethers differ from simple phenols in being less hydrophilic, caustic, and poisonous.<ref name=psgb468/> This allows meat to be successfully preserved without tissue denaturation, and allows creosote to be used as a medical ointment.<ref name=allen348/>
{| style="background:#F9F9F9; border:1px solid #AAA; padding:5px; float:right; margin-left:20px;"
|
{| style="font-size:12px; text-align:left;"
|+ style="text-align:left; padding-left:5px; padding-bottom:10px; font-size:13.5px;" | Derivation of wood-tar creosote from resinous woods<ref name=overton13/>
|
[[File:Derivation of wood-tar creosote.svg|frameless|upright=1.5]]
|}
|}
Because wood-tar creosote is used for its guaiacol and creosol content, it is generally derived from [[beech tree|beechwood]] rather than other woods, since it distills with a higher proportion of those chemicals to other phenolics. The creosote can be obtained by distilling the wood tar and treating the fraction heavier than water with a sodium hydroxide solution. The alkaline solution is then separated from the insoluble oily layer, boiled in contact with air to reduce impurities, and decomposed by diluted sulfuric acid. This produces a crude creosote, which is purified by re-solution in alkali, re-precipitation with acid, then redistilled with the fraction passing over between 200° and 225° constituting the purified creosote.<ref name=allen347/>

When ferric chloride is added to a dilute solution, it will turn green: a characteristic of ortho-oxy derivatives of benzene.<ref name=psgb468/> It dissolves in sulfuric acid to a red liquid, which slowly changes to purple-violet. Shaken with hydrochloric acid in the absence of air, it becomes red, the color changing in the presence of air to dark brown or black.<ref name=allen348/>

In preparation of food by [[smoking (food)|smoking]], [[guaiacol]] contributes mainly to the smoky [[taste]], while the dimethyl ether of [[pyrogallol]], [[syringol]], is the main chemical responsible for the smoky [[aroma]].

====Historical uses====

=====Industrial=====
Soon after it was discovered and recognized as the principle of meat smoking, wood-tar creosote became used as a replacement for the process. Several methods were used to apply the creosote. One was to dip the meat in pyroligneous acid or a water of diluted creosote, as Reichenbach did, or brush it over with them, and within one hour the meat would have the same quality of that of traditionally smoked preparations.<ref name=abel23/> Sometimes the creosote was diluted in vinegar rather than water, as vinegar was also used as a preservative.<ref name=letheby225/> Another was to place the meat in a closed box, and place with it a few drops of creosote in a small bottle. Because of the volatility of the creosote, the atmosphere was filled with a vapour containing it, and it would cover the flesh.<ref name=abel23/>

The application of wood tar to seagoing vessels was practiced through the 18th century and early 19th century, before the creosote was isolated as a compound. Wood-tar creosote was found not to be as effective in wood treatments, because it was harder to infuse the creosote into the wood cells, but still experiments<ref name=joerin767/> were done, including by many governments, because it proved to be less expensive on the market.<ref name=bradbury107/>

=====Medical=====
Even before creosote as a chemical compound was discovered, it was the chief active component of medicinal remedies in different cultures around the world.

In antiquity, pitches and resins were used commonly as medicines. [[Pliny the Elder|Pliny]] mentions a variety of tar-like substances being used as medicine, including ''cedria'' and ''pissinum''.<ref name=cormack58/> ''Cedria'' was the pitch and resin of the cedar tree, being equivalent to the oil of tar and pyroligneous acid which are used in the first stage of distilling creosote.<ref name=parr383/><ref name=pliny8/> He recommends cedria to ease the pain in a toothache, as an injection in the ear in case of hardness of hearing, to kill parasitic worms, as a preventive for infusion, as a treatment for [[phthiriasis]] and [[wikt:porrigo|porrigo]], as an antidote for the poison of the [[sea hare]], as a liniment for [[elephantiasis]], and as an ointment to treat [[ulcer]]s both on the skin and in the lungs.<ref name=pliny8/> He further speaks of cedria being used as the embalming agent for preparing mummies.<ref name=cormack58/> ''Pissinum'' was a tar water that was made by boiling cedria, spreading wool fleeces over the vessels to catch the steam, and then wringing them out.<ref name=berkeley9/><ref name=pliny290/>

[[File:John Smibert - Bishop George Berkeley - Google Art Project.jpg|thumb|left|upright|Portrait of [[George Berkeley|Bishop Berkeley]] by [[John Smybert]], 1727]]
The ''Pharmacopée de Lyon'', published in 1778, says that cedar tree oil is believed to cure vomiting and help medicate tumors and ulcers.<ref name=cormack59/><ref name=vitet427/> Physicians contemporary to the discovery of creosote recommended ointments and pills made from tar or pitch to treat skin diseases.<ref name=cormack59/> [[Tar water]] had been used as a folk remedy since the Middle Ages to treat affections like dyspepsia. [[George Berkeley|Bishop Berkeley]] wrote several works on the medical virtues of tar water, including a philosophical work in 1744 titled ''Siris: a chain of philosophical reflexions and inquiries concerning the virtues of tar water, and divers other subjects connected together and arising one from another'', and a poem where he praised its virtues.<ref name=cd300/> Pyroligneous acid was also used at the time in a medicinal water called ''Aqua Binelli'' (Binelli's water),<ref name=cormack59/> a compound which its inventor, the Italian Fedele Binelli, claimed to have [[Hemostasis|hemostatic]] properties in his research published in 1797.{{sfn|Tsiamis |Sgantzou |Popoti |Papavramidou |2020}} These claims have since been disproven.{{sfn|Tsiamis |Sgantzou |Popoti |Papavramidou |2020}}{{sfn|Simon|1833}}{{sfn|Dunglison|1846|pp=64–65}}

Given this history, and the antiseptic properties known to creosote, it became popular among physicians in the 19th century. A dilution of creosote in water was sold in pharmacies as ''Aqua creosoti'', as suggested by the previous use of pyroligneous acid. It was prescribed to quell the irritability of the stomach and bowels and detoxify, treat ulcers and abscesses, neutralize bad odors, and stimulate the mucous tissues of the mouth and throat.<ref name=king617/><ref name=taylor207/> Creosote in general was listed as an [[irritation|irritant]], [[styptic]], [[antiseptic]], [[narcotic]], and [[diuretic]], and in small doses when taken internally as a [[sedative]] and [[anaesthetic]]. It was used to treat ulcers, and as a way to sterilize the tooth and deaden the pain in case of a tooth-ache.<ref name=king617/>

Creosote was suggested as a treatment for tuberculosis by Reichenbach as early as 1833. Following Reichenbach, it was argued for by [[John Elliotson]] and Sir [[John Rose Cormack]].<ref name=king617/> Elliotson, inspired by the use of creosote to arrest vomiting during an outbreak of [[cholera]], suggested its use for tuberculosis through inhalation. He also suggested it for epilepsy, neuralgia, diabetes, and chronic [[glanders]].<ref name=whittaker77/> The idea of using it for tuberculosis failed to be accepted. Use for this purpose was dropped, until the idea was revived in 1876 by British doctor [[G. Anderson Imlay]], who suggested it be applied locally by spray to the bronchial mucous membrane.<ref name=king617/><ref name=imlay514/><ref name=dobbell315/> This was followed up in 1877 when it was argued for in a clinical paper by [[Charles-Joseph Bouchard|Charles Bouchard]] and [[Henri Gimbert]].<ref name=kinnicut514/> Germ theory had been established by [[Louis Pasteur|Pasteur]] in 1860, and Bouchard, arguing that a [[bacillus]] was responsible for the disease, sought to rehabilitate creosote for its use as an antiseptic to treat it. He began a series of trials with Gimbert to convince the scientific community, and claimed a promising cure rate.<ref name=contrepois211/> A number of publications in Germany confirmed his results in the following years.<ref name=kinnicut514/>

Later, a period of experimentation with different techniques and chemicals using creosote in treating tuberculosis lasted until about 1910, when radiation therapy seemed more promising. Guaiacol, instead of a full creosote solution, was suggested by [[Hermann Sahli]] in 1887. He argued it had the active chemical of creosote and had the advantage of being of definite composition and having a less unpleasant taste and odor.<ref name=kinnicut515/> A number of solutions of both creosote and guaiacol appeared on the market, such as ''phosphotal'' and ''guaicophosphal'', phosphites of creosote and guaiacol; ''eosot'' and ''geosot'', valerinates of creosote and guaicol; ''phosot'' and ''taphosot'', phosphate and tannophospate of creosote; and ''creosotal'' and ''tanosal'', tannates of creosote.<ref name=coblentz/> Creosote and eucalyptus oil were also a remedy used together, administered through a vaporizor and inhaler. Since then, more effective and safer treatments for tuberculosis have been developed.

In the 1940s, Canadian-based [[Eldon Boyd]] experimented with guaiacol and a recent synthetic modification—glycerol guaiacolate ([[guaifenesin]])—on animals. His data showed that both drugs were effective in increasing secretions into the airways in laboratory animals, when high-enough doses were given.{{citation needed|date=August 2020}}

====Current uses====

=====Industrial=====
Wood-tar creosote is to some extent used for [[wood preservation]], but it is generally mixed with coal-tar creosote, since the former is not as effective. Commercially available preparations of "[[liquid smoke]]", marketed to add a smoked flavour to meat and aid as a preservative, consist primarily of creosote and other constituents of smoke.<ref name=chenoweth206/> Creosote is the ingredient that gives liquid smoke its function; guaicol lends to the taste and the creosote oils help act as the preservative. Creosote can be destroyed by treatment with chlorine, either [[sodium hypochlorite]], or [[calcium hypochlorite]] solutions. The phenol ring is essentially opened, and the molecule is then subject to normal digestion and normal respiration.{{Citation needed|date=August 2019}}

=====Medical=====
The [[guaifenesin]] developed by Eldon Boyd is still commonly used today as an [[expectorant]], sold over the counter, and usually taken by mouth to assist the bringing up of phlegm from the airways in acute respiratory tract infections. Guaifenesin is a component of [[Mucinex]], [[Robitussin DAC]], [[Cheratussin DAC]], [[Robitussin AC]], [[Cheratussin AC]], [[Benylin]], [[DayQuil]] Mucous Control, Meltus, and Bidex 400.{{Citation needed|date=September 2021}}

[[Seirogan]] is a popular [[Kampo]] medicine in Japan, used as an anti-diarrheal, and has 133&nbsp;mg wood creosote from beech, pine, maple or oak wood per adult dose as its primary ingredient. Seirogan was first used as a gastrointestinal medication by the Imperial Japanese Army in Russia during the [[Russo-Japanese War]] of 1904 to 1905.<ref name=seirogan/>

[[Creomulsion]] is a cough medicine in the United States, introduced in 1925, that is still sold and contains beechwood creosote. Beechwood creosote is also found under the name ''kreosotum'' or ''kreosote''.

===Coal-tar creosote===
{| style="background:#F9F9F9; border:1px solid #AAA; padding:5px; float:right; margin-left:20px; width:375px"
|
{| class="sortable" style="font-size:12px; text-align:right;"
|+ style="text-align:left; padding-left:5px; padding-bottom:10px; font-size:13.5px;" | Composition of a typical coal-tar creosote<ref name=melber11/><ref name=speight456/>
! class="unsortable" style="text-align:left; padding-right:20px; width:230px" |
|
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Aromatic hydrocarbons]]
<span style="font-weight:normal>Polycyclic aromatic hydrocarbons ([[Polycyclic aromatic hydrocarbon|PAHs]]), alkylated PAHs, [[benzene]]s, [[toluene]]s, [[ethylbenzene]]s, and [[xylene]]s ([[BTEX]])</span>
| 75.0–90.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Tar acids]] / [[phenol]]ics
<span style="font-weight:normal>Phenols, cresols, xylenols, and naphthols</span>
| 5.0–17.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Tar bases]] / [[nitrogen]]-containing heterocycles
<span style="font-weight:normal>Pyridines, quinolines, benzoquinolines, acridines, indolines, and carbazoles</span>
| 3.0–8.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Sulfur]]-containing [[heterocyclic compound|heterocycles]]
<span style="font-weight:normal>[[Benzothiophene]]s</span>
| 1.0–3.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Oxygen]]-containing heterocycles
<span style="font-weight:normal>Dibenzofurans</span>
| 1.0–3.0%
|-
! class="unsortable" style="text-align:left; padding-right:20px;" | [[Aromatic amine]]s
<span style="font-weight:normal>Aniline, aminonaphthalenes, [[diphenylamine]]s, aminofluorenes, and aminophenanthrenes, cyano-PAHs, benz acridines</span>
|0.1–1.0%
|-
|}
|}
Coal-tar creosote is greenish-brown liquid, with different degrees of darkness, viscosity, and fluorescence depending on how it is made. When freshly made, the creosote is a yellow oil with a greenish cast and highly fluorescent, and the fluorescence is increased by exposure to air and light. After settling, the oil is dark green by reflected light and dark red by transmitted light.<ref name=allen366/> To the naked eye, it generally appears brown. The creosote (often called "creosote oil") consists almost wholly of [[aromatic hydrocarbon]]s, with some amount of bases and acids and other neutral oils. The flash point is 70&ndash;75&nbsp;°C and burning point is 90&ndash;100&nbsp;°C,<ref name=bateman50/> and when burned it releases a greenish smoke.<ref name=nickels615/> The smell largely depends on the naphtha content in the creosote. If there is a high amount, it will have a naphtha-like smell, otherwise it will smell more of tar.

In the process of coal-tar distillation, the distillate is collected into four fractions; the "light oil", which remains lighter than water, the "middle oil" which passes over when the light oil is removed; the "heavy oil", which sinks; and the "[[anthracene oil]]", which when cold is mostly solid and greasy, of a buttery consistence. Creosote refers to the portion of coal tar which distills as "heavy oil", typically between 230 and 270&nbsp;°C, also called "dead oil"; it sinks into water but still is fairly liquid. Carbolic acid is produced in the second fraction of distillation and is often distilled into what is referred to as "[[carbolic oil]]".<ref name=philips255/><ref name=martin416/><ref name=nelson204/><ref name=noller185/>
{| style="background:#F9F9F9; border:1px solid #AAA; padding:5px; float:left; margin-right:20px;"
|
{| style="font-size:12px; text-align:left;"
|+ style="text-align:left; padding-left:5px; padding-bottom:10px; font-size:13.5px;" | Derivation and general composition of coal-tar creosote<ref name=overton12/>
|
[[File:Derivation of coal-tar creosote.svg|frameless|upright=2]]
|}
|}
Commercial creosote contains substances from six groups.<ref name=melber11/> The two groups occur in the greatest amounts and are the products of the distillation process—the "[[tar acids]]", which distill below 205&nbsp;°C and consist mainly of phenols, cresols, and xylenols, including carbolic acid—and [[aromatic hydrocarbon]]s, which divide into [[naphthalene]]s, which distill approximately between 205 and 255&nbsp;°C, and constituents of an [[anthracene]] nature, which distill above 255&nbsp;°C.<ref name=ec531/> The quantity of each varies based on the quality of tar and temperatures used, but generally, the tar acids won't exceed 5%, the naphthalenes make up 15 to 50%, and the anthracenes make up 45% to 70%.<ref name=ec531/> The hydrocarbons are mainly aromatic; derivatives of benzene and related cyclic compounds such as [[naphthalene]], [[anthracene]], [[phenanthrene]], [[acenaphthene]], and [[fluorene]]. Creosotes from vertical-retort and low temperature tars contain, in addition, some paraffinic and olefinic hydrocarbons. The tar-acid content also depends on the source of the tar—it may be less than 3% in creosote from coke-oven tar and as high as 32% in creosote from vertical retort tar.<ref name=greenhow58/> All of these have antiseptic properties. The tar acids are the strongest antiseptics but have the highest degree of solubility in water and are the most volatile; so, like with wood-tar creosote, phenols are not the most valued component, as by themselves they would lend to being poor preservatives.<ref name=arbba287/> In addition, creosote contains several products naturally occurring in coal—nitrogen-containing heterocycles, such as acridines, carbazoles, and quinolines, referred to as the "[[tar bases]]" and generally make up about 3% of the creosote—sulfur-containing heterocycles, generally [[benzothiophene]]s<ref name=orr39/>—and oxygen-containing heterocycles, dibenzofurans.<ref name=speight77/> Lastly, creosote contains a small number of [[aromatic amine]]s produced by the other substances during the distillation process and likely resulting from a combination of [[thermolysis]] and [[hydrogenation]].<ref name=orr255/><ref name=bateman47/> The tar bases are often extracted by washing the creosote with aqueous mineral acid,<ref name=greenhow58/> although they're also suggested to have antiseptic ability similar to the tar acids.

Commercially used creosote is often treated to extract the carbolic acid, naphthalene, or anthracene content. The carbolic acid or naphthalene is generally extracted to be used in other commercial products.<ref name=mushrush115/> In the early 20th century, American-produced creosote oils typically had low amounts of anthracene and high amounts of naphthalene, because when forcing the distillate at a temperature that produces anthracene the soft pitch will be ruined and only the hard pitch will remain; this ruined it for [[Bituminous waterproofing|use in roofing purposes]] (which was common before widespread availability of cheap oil bitumen) and only left a product which wasn't commercially useful.<ref name=bateman47/>

====Historical uses====

=====Industrial=====
The use of coal-tar creosote on a commercial scale began in 1838, when a patent covering the use of creosote oil to treat timber was taken out by inventor [[John Bethell (inventor)|John Bethell]]. The "Bethell process"—or as it later became known, the [[full-cell process (wood processing)|full-cell process]]—involves placing wood to be treated in a sealed chamber and applying a vacuum to remove air and moisture from wood "cells". The wood is then pressure-treated to imbue it with creosote or other preservative chemicals, after which vacuum is reapplied to separate the excess treatment chemicals from the timber. Alongside the zinc chloride-based [[Sir William Burnett|"Burnett process"]], use of creosoted wood prepared by the Bethell process became a principal way of preserving railway timbers (most notably railway sleepers) to increase the lifespan of the timbers, and avoiding having to regularly replace them.<ref name=angier408/>

Besides treating wood, it was also used for lighting and fuel. In the beginning, it was only used for lighting needed in harbour and outdoor work, where the smoke that was produced from burning it was of little inconvenience. By 1879, lamps had been created that ensured a more complete combustion by using compressed air, removing the drawback of the smoke. Creosote was also processed into gas and used for lighting that way. As a fuel, it was used to power ships at sea and blast furnaces for different industrial needs, once it was discovered to be more efficient than unrefined coal or wood. It was also used industrially for the softening of hard pitch, and burned to produce [[lamp black]]. By 1890, the production of creosote in the [[United Kingdom]] totaled approximately 29,900,000 gallons per year.<ref name=nickels615/>

In 1854, [[Alexander McDougall]] and [[Robert Angus Smith]] developed and patented a product called [[McDougall's Powder]] as a sewer deodorant; it mainly consisted of [[phenol|carbolic acid]] derived from creosote. McDougall, in 1864, experimented with his solution to remove [[entozoa]] parasites from cattle pasturing on a sewage farm.<ref name=brock91/> This later led to widespread use of creosote as a cattle wash and [[sheep dip]]. External parasites would be killed in a creosote diluted dip, and drenching tubes would be used to administer doses to the animals' stomachs to kill internal parasites.<ref name=salmon7/>

[[File:Wood Pavers (36011657806).jpg|thumb|Wooden street pavers in Chicago]]
Creosoted wood blocks were a common road-paving material in the late 19th and early 20th centuries, but ultimately fell out of favor because they did not generally hold up well enough over time.<ref>{{cite web |title=Ames Street Paving |publisher=Ames History Museum |location=Ames, Iowa |url=https://ameshistory.org/content/ames-street-paving |access-date=2023-01-25}}</ref><ref>{{cite journal |title=(untitled advertisement) |journal=The Town Crier |volume=10 |issue=32 |page=7 |location=Seattle |date=1915-08-07 |url=https://commons.wikimedia.org/wiki/File:The_Town_Crier,_v.10,_no.32,_Aug._7,_1915_-_DPLA_-_9f439e1283fe9793c210a74b8e85dc66_(page_7).jpg |access-date=2023-01-25}}</ref><ref>{{cite web |last1=Reed |first1=Ryan J. |title=The Creosoted Wood Block: One Step in the Evolution of St. Louis Paving |publisher=Landmarks Association of St. Louis, Inc. |location=St. Louis, Missouri |url=https://www.landmarks-stl.org/news/the_creosoted_wood_block_one_step_in_the_evolution_of_st_louis-paving/ |access-date=2023-01-25}}</ref><ref>{{cite web |title=Historic Wood Paver from Galveston's Market Street |publisher=Rosenberg Library Museum |location=Galveston, Texas |url=https://www.rosenberg-library-museum.org/treasures/historic-wood-paver-from-galvestons-market-street |access-date=2023-01-05}}</ref>

Two later methods for creosoting wood were introduced after the turn of the century, referred to as [[empty-cell process]]es, because they involve compressing the air inside the wood so that the preservative can only coat the inner cell walls rather than saturating the interior cell voids. This is a less effective, though usually satisfactory, method of treating the wood, but is used because it requires less of the creosoting material. The first method, the "Rüping process" was patented in 1902, and the second, the "Lowry process" was patented in 1906. Later in 1906, the "Allardyce process" and "Card process" were patented to treat wood with a combination of both creosote and zinc chloride.<ref name=angier408/> In 1912, it was estimated that a total of 150,000,000 gallons were produced in the US per year.

=====Medical=====
Coal-tar creosote, despite its toxicity, was used as a stimulant and [[escharotic]], as a [[corrosive substance|caustic]] agent used to treat ulcers and malignancies, cauterize wounds, and prevent infection and decay. It was particularly used in dentistry to destroy tissues and arrest necrosis.<ref name=farrar412/><ref name=farrar1/><ref name=pease/>

====Current uses====

=====Industrial=====
Coal-tar creosote is the most widely used wood treatment today; both industrially, processed into wood using pressure methods such as "full-cell process" or "empty-cell process", and more commonly applied to wood through brushing. In addition to toxicity to fungi, insects, and marine borers, it serves as a natural [[water repellent]]. It is commonly used to preserve and waterproof [[railroad tie]]s, pilings, telephone poles, power line poles, marine pilings, and fence posts. Although suitable for use in preserving the structural timbers of buildings, it is not generally used that way because it is difficult to apply. There are also concerns about the environmental impact of the [[#Release into environment|leaching of creosote into aquatic ecosystems]].

Due to its [[carcinogen]]ic character, the European Union has regulated the quality of creosote for the EU market<ref name=cec2001/> and requires that the sale of creosote be limited to professional users.<ref name=cec2007/><ref name=hse2011/> The [[United States Environmental Protection Agency]] regulates the use of coal-tar creosote as a wood preservative under the provisions of the [[Federal Insecticide, Fungicide, and Rodenticide Act]]. Creosote is considered a restricted-use pesticide and is only available to licensed pesticide applicators.<ref name=creosotecouncil/><ref name=ibach141/>

===Oil-tar creosote===
{| style="background:#F9F9F9; border:1px solid #AAA; padding:5px; float:right; margin-left:20px;"
|
{| style="font-size:12px; text-align:left;"
|+ style="text-align:left; padding-left:5px; padding-bottom:10px; font-size:13.5px;" | Derivation and general composition of water-gas-tar creosote<ref name=overton12/>
|
[[File:Derivation of water-gas-tar creosote.svg|frameless|upright=2]]
|}
|}
Oil-tar creosote is derived from the tar that forms when using petroleum or shale oil in the manufacturing of gas. The distillation of the tar from the oil occurs at very high temperatures; around 980&nbsp;°C. The tar forms at the same time as the gas, and once processed for creosotes contains a high percentage of cyclic hydrocarbons, a very low amount of tar acids and tar bases, and no true anthracenes have been identified.<ref name=voorhies/> Historically, this has mainly been produced in the United States on the Pacific coast, where petroleum has been more abundant than coal. Limited quantities have been used industrially, either alone, mixed with coal-tar creosote, or fortified with [[pentachlorophenol]].<ref name=hunt88/>

===Water-gas-tar creosote===
Water-gas-tar creosote is also derived from petroleum oil or shale oil, but by a different process; it is distilled during the production of [[water gas]]. The tar is a by-product resulting from enrichment of water gas with gases produced by thermal decomposition of petroleum. Of the creosotes derived from oil, it is practically the only one used for wood preservation. It has the same degree of solubility as coal-tar creosote and is easy to infuse into wood. Like standard oil-tar creosote, it has a low amount of tar acids and tar bases, and has less antiseptic qualities.<ref name=overton12/> Petri dish tests have shown that water-gas-tar creosote is one-sixth as anti-septically effective as that of coal-tar.<ref name=stimson626/>

===Lignite-tar creosote===
Lignite-tar creosote is produced from [[lignite]] rather than bituminous coal, and varies considerably from coal-tar creosote. Also called "lignite oil", it has a very high content of tar acids, and has been used to increase the tar acids in normal creosote when necessary.<ref name=richardson103/> When it has been produced, it has generally been applied in mixtures with coal-tar creosote or petroleum. Its effectiveness when used alone has not been established. In an experiment with southern yellow pine fence posts in Mississippi, straight lignite-tar creosote was giving good results after about 27 years exposure, although not as good as the standard coal-tar creosote used in the same situation.<ref name=hunt97/>

===Peat-tar creosote===
There have also been attempts to distill creosote from [[peat]]-tar, although mostly unsuccessful due to the problems with winning and drying peat on an industrial scale.<ref name=eb821/> Peat tar by itself has in the past been used as a wood preservative.

==Health effects==
According to the Agency for Toxic Substances and Disease Registry (ATSDR), eating food or drinking water contaminated with high levels of coal-tar creosote may cause a burning in the mouth and throat, and stomach pains. ATSDR also states that brief direct contact with large amounts of coal-tar creosote may result in a rash or severe irritation of the skin, chemical burns of the surfaces of the [[human eye|eyes]], [[convulsion]]s and [[mental confusion]], kidney or liver problems, [[unconsciousness]], and even [[death]]. Longer direct skin contact with low levels of creosote mixtures or their vapours can result in increased light sensitivity, damage to the [[cornea]], and skin damage. Longer exposure to creosote vapours can cause [[irritation]] of the [[respiratory tract]].

The [[International Agency for Research on Cancer]] (IARC) has determined that coal-tar creosote is probably [[carcinogenic]] to humans, based on adequate animal evidence and limited human evidence.{{citation needed|date=February 2017}} The animal testing relied upon by IARC involved the continuous application of creosote to the shaved skin of [[rodent]]s. After weeks of creosote application, the [[animal]]s developed cancerous skin lesions and in one test, lesions of the lung. The [[United States Environmental Protection Agency]] has stated that coal-tar creosote is a probable human [[carcinogen]] based on both human and animal studies.<ref name=epa/> As a result, the Federal [[Occupational Safety and Health Administration]] (OSHA) has set a permissible exposure limit of 0.2 milligrams of coal-tar creosote per cubic meter of air (0.2&nbsp;mg/m3) in the workplace during an 8-hour day, and the Environmental Protection Agency (EPA) requires that spills or accidental releases into the environment of one pound (0.454&nbsp;kg) or more of creosote be reported to them.{{citation needed|date=February 2017}}

There is no unique exposure pathway of children to creosote. Children exposed to creosote probably experience the same health effects seen in adults exposed to creosote. It is unknown whether children differ from adults in their susceptibility to health effects from creosote.

A 2005 mortality study of creosote workers found no evidence supporting an increased risk of cancer death, as a result of exposure to creosote. Based on the findings of the largest mortality study to date of workers employed in creosote wood treating plants, there is no evidence that employment at creosote wood-treating plants or exposure to creosote-based preservatives was associated with any significant mortality increase from either site-specific cancers or non-malignant diseases. The study consisted of 2,179 employees at eleven plants in the United States where wood was treated with creosote preservatives. Some workers began work in the 1940s to 1950s. The observation period of the study covered 1979–2001. The average length of employment was 12.5 years. One third of the study subjects were employed for over 15 years.<ref name=wong683/>

The largest health effect of creosote is deaths caused by residential chimney fires due to chimney tar (creosote) build-up. This is entirely unconnected with its industrial production or use.<ref name=dhs/>

==Build-up in chimneys==
Burning wood and [[fossil fuel]]s in the absence of adequate airflow (such as in an enclosed [[furnace (house heating)|furnace]] or stove), causes incomplete combustion of the oils in the wood, which are off-gassed as volatiles in the smoke. As the smoke rises through the chimney it cools, causing water, carbon, and volatiles to condense on the interior surfaces of the chimney flue. The black oily residue that builds up is referred to as creosote, which is similar in composition to the commercial products by the same name, but with a higher content of [[carbon black]].

Over the course of a season creosote deposits can become several inches thick. This creates a [[feedback|compounding problem]], because the creosote deposits reduce the draft (airflow through the chimney) which increases the probability that the wood fire is not getting enough air for complete combustion. Since creosote is highly combustible, a thick accumulation creates a fire hazard. If a hot fire is built in the stove or fireplace, and the air control left wide open, this may allow hot oxygen into the chimney where it comes in contact with the creosote which then ignites—causing a [[chimney fire]]. Chimney fires often spread to the main building because the chimney gets so hot that it ignites any combustible material in direct contact with it, such as wood. The fire can also spread to the main building from sparks emitting from the chimney and landing on combustible roof surfaces. In order to properly maintain chimneys and heaters that burn wood or carbon-based fuels, the creosote buildup must be removed. [[Modern chimney cleaning|Chimney sweeps]] perform this service for a fee.<ref name=dhs/>

==Release into environment==
[[File:Piling.jpg|thumb|upright|Broken creosote piling exposed by weathering]]
Even though creosote is pressurized into the wood, the release of the chemical – and resulting [[marine pollution]] – occurs due to many different events: During the lifetime of the marine piling, weathering occurs from [[tide]]s and water flow which slowly opens the oily outer coating and exposes the smaller internal pores to more water flow.<ref name="Shupe"/> Frequent weathering occurs daily, but more severe weather, such as hurricanes, can cause damage or loosening of the wooden pilings.<ref name="Shupe"/> Many pilings are either broken into pieces from debris, or are completely washed away during these storms. When the pilings are washed away, they come to settle on the bottom of the body of water where they reside, and then they leach chemicals into the water slowly over a long period of time. This long-term secretion is not normally noticed because the piling is submerged beneath the surface, hidden from sight.

The creosote is mostly insoluble in water, but the lower-molecular-weight compounds will become soluble the longer the broken wood is exposed to the water.<ref name="Smith 2002"/> In this case, some of the chemicals become water-soluble and further leach into the aquatic sediment while the rest of the insoluble chemicals remain together in a tar-like substance.<ref name="Smith 2002"/> Another source of damage comes from wood-boring fauna, such as [[shipworm]]s and ''[[Limnoria]]''.<ref name="Shupe 2012"/> Though creosote is used as a pesticide preservative, studies have shown that Limnoria is resistant to wood preservative pesticides and can cause small holes in the wood, through which creosote can then be released.<ref name="Shupe 2012"/>

==Chemical reactions with sediment and organisms==
Once the soluble compounds from the creosote preservative leach into the water, the compounds begin reacting with the external environment or are consumed by organisms. The reactions vary depending on the concentration of each compound that is released from the creosote, but major reactions are outlined below:

===Alkylation===
[[Alkylation]] occurs when a molecule replaces a hydrogen atom with an alkyl group that generally comes from an organic molecule.<ref>{{cite web |title=Alkylation |website=Dictionary.com |url=https://www.dictionary.com/browse/alkylation |access-date=October 29, 2016}}</ref> Alkyl groups that are found naturally occurring in the environment are [[organometallic chemistry|organometallic]] compounds.<ref name="Connell 2005"/> Organometallic compounds generally contain a methyl, ethyl, or butyl derivative which is the alkyl group that replaces the hydrogen.<ref name="Connell 2005"/> Other organic compounds, such as [[methanol]], can provide alkyl groups for alkylation.<ref name=Bolognini2002/> Methanol is found naturally in the environment in small concentrations, and has been linked to the release from biological decomposition of waste and even a byproduct of vegetation.<ref name=Howard311/> The following reactions are alkylations of soluble compounds found in creosote preservatives with methanol.

====m-Cresol====
[[File:M-cresol reaction with methanol.png|frameless|upright=2.25]]

The diagram above depicts a reaction between m-cresol and methanol where a c-alkylation product is produced.<ref name=Bolognini2002/> The c-alkylation reaction means that instead of replacing the hydrogen atom on the -OH group, the methyl group (from the methanol) replaces the hydrogen on a carbon in the benzene ring.<ref name=Bolognini2002/> The products of this c-alkylation can be in either a para- or ortho- orientation on the molecule, as seen in the diagram, and water, which is not shown.<ref name=Bolognini2002/> [[Isomer]]s of the dimethylphenol (DMP) compound are the products of the para- and ortho-c-alkylation.<ref name=Bolognini2002/> Dimethylphenol (DMP) compound is listed as an aquatic hazard by characteristic, and is toxic with long lasting effects.<ref>{{cite web |title=2,3-Dimethylphenol |website=PubChem Database |publisher=National Center for Biotechnology Information |url=https://pubchem.ncbi.nlm.nih.gov/compound/2_3-dimethylphenol |access-date=April 7, 2019}}</ref>

====Phenol====
[[File:Phenol reaction with methanol.png|frameless|upright=1.5]]

This diagram shows an o-alkylation between phenol and methanol. Unlike the c-alkylation, the o-alkylation replaces the hydrogen atom on the -OH group with the methyl group (from the methanol).<ref name="Balsama et al 1984"/> The product of the o-alkylation is methoxybenzene, better-known as [[anisole]], and water, which is not shown in the diagram.<ref name="Balsama et al 1984"/> Anisole is listed as an acute hazard to aquatic life with long-term effects.<ref>{{cite web |title=Anisole |website=PubChem Database |publisher=National Center for Biotechnology Information |url=https://pubchem.ncbi.nlm.nih.gov/compound/anisole |access-date=April 7, 2019}}</ref>

===Bioaccumulation===
[[Bioaccumulation]] is the process by which an organism takes in chemicals through ingestion, exposure, and inhalation.<ref name="Clarke"/> Bioaccumulation is broken down into bioconcentration (uptake of chemicals from the environment) and biomagnification (increasing concentration of chemicals as they move up the food chain).<ref name="Clarke"/> Certain species of aquatic organisms are affected differently from the chemicals released from creosote preservatives. One of the more studied organisms is a mollusk. Mollusks attach to the wooden, marine pilings and are in direct contact with the creosote preservatives.<ref name=Weitkamp2011/> Many studies have been conducted using [[polycyclic aromatic hydrocarbon]]s (PAH), which are low molecular hydrocarbons found in some creosote-based preservatives. In a study conducted from Pensacola, Florida, a group of native mollusks were kept in a controlled environment, and a different group of native mollusks were kept in an environment contaminated with creosote preservatives.<ref name="Elder"/> The mollusks in the contaminated environment were shown to have a bioaccumulation of up to ten times the concentration of PAH than the control species.<ref name="Elder"/> The intake of organisms is dependent on whether the compound is in an ionized or an un-ionized form.<ref name="Neff 2002"/> To determine whether the compound is ionized or un-ionized, the pH of the surrounding environment must be compared to the pKa or acidity constant of the compound.<ref name="Neff 2002"/> If the pH of the environment is lower than the pKa, then the compound is un-ionized which means that the compound will behave as if it is non-polar.<ref name="Neff 2002"/> Bioaccumulation for un-ionized compounds comes from partitioning equilibrium between the aqueous phase and the lipids in the organism.<ref name="Neff 2002"/> If the pH is higher than the pKa, then the compound is considered to be in the ionized form.<ref name="Neff 2002"/> The un-ionized form is favored because the bioaccumulation is easier for the organism to intake through partitioning equilibrium.<ref name="Neff 2002"/> The table below shows a list of pKas from compounds found in creosote preservatives and compares them to the average pH of seawater (reported to be 8.1).<ref>{{cite web |title=Ocean Acidification |website=Pristine Seas |publisher=National Geographic |url=https://www.nationalgeographic.org/society/our-programs/pristine-seas/ |url-status=dead |archive-url=https://web.archive.org/web/20150829013542/http://ocean.nationalgeographic.com/ocean/explore/pristine-seas/critical-issues-ocean-acidification/ |archive-date=2015-08-29}}</ref>
{| class="wikitable"
!Compound
!pKa
!pH of Seawater
!Form (Ionized or Un-Ionized)
|-
|m-cresol
|10.09
| rowspan="6" |8.1
|Un-ionized
|-
|o-cresol
|10.29
|Un-ionized
|-
|p-cresol
|10.30
|Un-ionized
|-
|2-ethylphenol
|10.20
|Un-ionized
|-
|guaiacol
|9.98
|Un-ionized
|-
|phenol
|9.99
|Un-ionized
|}

Each of the compounds in the table above is found in creosote preservatives; all are in the favored un-ionized form. In another study, various species of small fish were tested to see how the exposure time to PAH chemicals affected the fish.<ref name="United States Environmental Protection Agency-2008"/> This study showed that an exposure time of 24–96 hours on various shrimp and fish species affected the growth, reproduction, and survival functions of the organisms for most of the compounds tested.<ref name="United States Environmental Protection Agency-2008"/>

===Biodegradation===
It can be seen in some studies that biodegradation accounts for the absence of creosote preservatives on the initial surface of the sediment.<ref name="Elder"/> In a study from Pensacola, Florida, PAHs were not detected on the surface on the aquatic sediment, but the highest concentrations were detected at a depth of 8-13 centimeters.<ref name="Elder"/> A form an anaerobic biodegradation of m-cresol was seen in a study using sulfate-reducing and nitrate-reducing enriched environments.<ref name="Ramanand"/> The reduction of m-cresol in this study was seen in under 144 hours, while additional chemical intermediates were being formed.<ref name="Ramanand"/> The chemical intermediates were formed in the presence of [[bicarbonate]]. The products included 4-hydroxy-2-methylbenzoic acid and acetate compounds.<ref name="Ramanand"/> Although the conditions were enriched with the reducing anaerobic compounds, sulfate and nitrate reducing bacteria are commonly found in the environment. For further information, see [[sulfate-reducing bacteria]]. The type of anaerobic bacteria ultimately determines the reduction of the creosote preservative compounds, while each individual compound may only go through reduction under certain conditions.<ref name="Phelps"/> [[BTX (chemistry)|BTEX]] is a mixture of benzene, toluene, ethylbenzene, and xylene, that was studied in the presence of four different anaerobic-enriched sediments.<ref name="Phelps"/> Though the compound, BTEX, is not found in creosote preservatives, the products of creosote preservatives' oxidation-reduction reactions include some of these compounds. For oxidation-reduction reactions, see the following section. In this study, it was seen that certain compounds such as benzene were only reduced under sulfate-enriched environments, while toluene was reduced under a variety of bacteria-enriched environments, not just sulfate.<ref name="Phelps"/> The biodegradation of a creosote preservative in an anaerobic enrichment depends not only on the type of bacteria enriching the environment, but also the compound that has been released from the preservative. In aerobic environments, preservative compounds are limited in the biodegradation process by the presence of free oxygen.<ref name="Aronson et al 1999"/> In an aerobic environment, free oxygen comes from oxygen saturated sediments, sources of precipitation, and plume edges.<ref name="Aronson et al 1999"/> The free oxygen allows for the compounds to be oxidized and decomposed into new intermediate compounds.<ref name="Aronson et al 1999"/> Studies have shown that when BTEX and PAH compounds were placed in aerobic environments, the oxidation of the ring structures caused cleavage in the aromatic ring and allowed for other functional groups to attach.<ref name="Aronson et al 1999"/> When an aromatic hydrocarbon was introduced to the molecular oxygen in experimental conditions, a dihydrodiol intermediate was formed, and then oxidation occurred transforming the aromatic into a catechol compound.<ref name="Aronson et al 1999"/> Catechol allows for cleavage of the aromatic ring to occur, where functional groups can then add in an ortho- or meta- position.<ref name="Aronson et al 1999"/>

===Oxidation-reduction===
Even though many studies conduct testing under experimental or enriched conditions, [[redox|oxidation-reduction reactions]] occur naturally and allow for chemicals to go through processes such as biodegradation, outlined above. Oxidation is defined as the loss of an electron to another species, while reduction is the gaining of an electron from another species. As compounds go through oxidation and reduction in sediments, the preservative compounds are altered to form new chemicals, leading to decomposition. An example of the oxidation of p-cresol and phenol can be seen in the figures below:

====p-Cresol====
[[File:P-cresol degradation to benzoate.png|frameless|upright=2.25]]

This reaction shows the oxidation of p-cresol in a sulfate-enriched environment.<ref name="Smolenski"/> P-cresol was seen to be the easiest to degrade through the sulfate-enriched environment, while m-cresol and o-cresol where inhibited.<ref name="Smolenski"/> In the chart above, p-cresol was oxidized under an anaerobic sulfate reducing condition and formed four different intermediates.<ref name="Smolenski"/> After the formation of the intermediates, the study reported further degradation of the intermediates leading to the production of carbon dioxide and methane.<ref name="Smolenski"/> The p-hydroxylbenzyl alcohol, p-hydroxylbenzaldehye, p-hyrdoxylbenzoate, and benzoate intermediates all are produced from this oxidation and released into the sediments.<ref name="Smolenski"/> Similar results were also produced by different studies using other forms of oxidation such as: iron-reducing organisms,<ref name=Lovley1990/> Copper/Manganese Oxide catalyst,<ref name=wang2004/> and nitrate- reducing conditions.<ref name=Bossert1986/>

====Phenol====
[[File:Phenol reaction with iron and peroxide.png|frameless|upright=1.5]]

This reaction shows the oxidation of phenol by iron and peroxide.<ref name="Zazo et al 2005"/> This combination of iron, which comes from iron oxide in the sediment, and the peroxide, commonly released by animals and plants into the environment, is known as the [[Fenton reaction|Fenton Reagent.]]<ref name="Zazo et al 2005"/> This reagent is used to oxidize phenol groups by the use of a radical hydroxide group produced from the peroxide in the p-benzoquinone.<ref name="Zazo et al 2005"/> This product of phenol's oxidation is now leached into the environment while other products include iron(II) and water. P-benzoquinone is listed as being a very toxic, acute environmental hazard.<ref>{{cite web |title=Quinone |website=PubChem Database |publisher=National Center for Biotechnology Information |url=https://pubchem.ncbi.nlm.nih.gov/compound/p-benzoquinone |access-date=April 7, 2019}}</ref>

==Environmental hazards==

===Sediment===
In aquatic sediments, several reactions can transform the chemicals released by the creosote preservatives into more dangerous chemicals. Most creosote preservative compounds have hazards associated with them before they are transformed. [[Cresol]] (m-, p-, and o-), [[phenol]], [[guaiacol]], and [[xylenol]] (1,3,4- and 1,3,5-) all are acute aquatic hazards{{citation needed|date=December 2017}} prior to going through chemical reactions with the sediments. Alkylation reactions allows for the compounds to transition into more toxic compounds{{citation needed|date=December 2017}} with the addition of R-groups to the major compounds found in creosote preservatives. Compounds formed through alkylation include: 3,4-dimethylphenol, 2,3-dimethylphenol, and 2,5-dimethylphenol, which are all listed as acute environmental hazards.<ref name=Bolognini2002/> Biodegradation controls the rate at which the sediment holds the chemicals, and the number of reactions that are able to take place. The biodegradation process can take place under many different conditions, and vary depending on the compounds that are released. Oxidation-reduction reactions allow for the compounds to be broken down into new forms of more toxic molecules. Studies have shown oxidation-reduction reactions of creosote preservative compounds included compounds that are listed as environmental hazards, such as p-benzoquinone in the oxidation of phenol.<ref name="Zazo et al 2005"/> Not only are the initial compounds in creosote hazardous to the environment, but the byproducts of the chemical reactions are environmental hazardous as well.

===Other===
From the contamination of the sediment, more of the ecosystem is affected. Organisms in the sediment are now exposed to the new chemicals. Organisms are then ingested by fish and other aquatic animals. These animals now contain concentrations of hazardous chemicals which were secreted from the creosote. Other issues with ecosystems include bioaccumulation. Bioaccumulation occurs when high levels of chemicals are passed to aquatic life near the creosote pilings. Mollusks and other smaller crustaceans are at higher risk because they are directly attached to the surface of wood pilings that are filled with creosote preservative. Studies show that mollusks in these environments take on high concentrations of chemical compounds which will then be transferred through the ecosystem's food chain. Bioaccumulation contributes to the higher concentrations of chemicals within the organisms in the aquatic ecosystems.<ref>{{cite web |title=Aquatic Food Webs |website=Marine Life Education Resource |publisher=National Oceanic and Atmospheric Administration |date=February 2019 |url=https://www.noaa.gov/education/resource-collections/marine-life/aquatic-food-webs |access-date=April 8, 2019}}</ref>

==See also==
* [[Creolin]]
* [[Pentachlorophenol]]

==Notes==
{{Reflist|21em|refs=
<ref name=schorlemmer152>{{harvnb|Schorlemmer|1885|p=152}}</ref>
<ref name=schorlemmer153>{{harvnb|Schorlemmer|1885|p=153}}</ref>
<ref name=nickels614>{{harvnb|Nickels|1890|p=614}}</ref>
<ref name=allen353>{{harvnb|Allen|1910|p=353}}</ref>
<ref name=allen347>{{harvnb|Allen|1910|p=347}}</ref>
<ref name=allen348>{{harvnb|Allen|1910|p=348}}</ref>
<ref name=apa1073>{{harvnb|American Pharmaceutical Association|1895|p=1073}}</ref>
<ref name=rcs294>{{harvnb|Renard|1895|p=294}}</ref>
<ref name=lee1483>{{harvnb|Lee|Lee|Takeoka|Kim|2005|p=1483}}</ref>
<ref name=roscoe37>{{harvnb|Roscoe|Schorlemmer|1888|p=37}}</ref>
<ref name=roscoe33>{{harvnb|Roscoe|Schorlemmer|1888|p=33}}</ref>
<ref name=psgb468>{{harvnb|Pharmaceutical Society of Great Britain|1898|p=468}}</ref>
<ref name=abel23>{{harvnb|Abel|Smith|1857|p=23}}</ref>
<ref name=letheby225>{{harvnb|Letheby|1870|pp=225–226}}</ref>
<ref name=cormack58>{{harvnb|Cormack|1836|p=58}}</ref>
<ref name=parr383>{{harvnb|Parr|1809|p=383}}</ref>
<ref name=berkeley9>{{harvnb|Berkeley|1744|p=[https://books.google.com/books?id=c10uAAAAYAAJ&pg=PA9 9]}}</ref>
<ref name=pliny8>{{harvnb|Pliny|1856|p=[https://books.google.com/books?id=NnRiAAAAMAAJ&pg=PA8 8]}}</ref>
<ref name=pliny290>{{harvnb|Pliny|1855|p=[https://books.google.com/books?id=A0EMAAAAIAAJ&pg=PA290 290]}}</ref>
<ref name=cormack59>{{harvnb|Cormack|1836|p=50}}</ref>
<ref name=vitet427>{{harvnb|Vitet|1778|p=427}}</ref>
<ref name=cd300>{{harvnb|Chemist and Druggist|1889|p=300}}</ref>
<ref name=king617>{{harvnb|King|Felter|Lloyd|1905|p=617}}</ref>
<ref name=taylor207>{{harvnb|Taylor|1902|p=207}}</ref>
<ref name=whittaker77>{{harvnb|Whittaker|1893|p=77}}</ref>
<ref name=contrepois211>{{harvnb|Contrepois|2002|p=211}}</ref>
<ref name=kinnicut514>{{harvnb|Kinnicutt|1892|p=514}}</ref>
<ref name=imlay514>{{harvnb|Imlay|1876|p=514}}</ref>
<ref name=dobbell315>{{harvnb|Dobbell|1878|p=315}}</ref>
<ref name=kinnicut515>{{harvnb|Kinnicutt|1892|p=515}}</ref>
<ref name=coblentz>{{harvnb|Coblentz|1908}}</ref>
<ref name=ec531>{{harvnb|Engineering and Contracting|1912|p=531}}</ref>
<ref name=arbba287>{{harvnb|American Railway Bridge and Building Association|1914|p=287}}</ref>
<ref name=allen366>{{harvnb|Allen|1910|p=366}}</ref>
<ref name=bateman47>{{harvnb|Bateman|1922|p=47}}</ref>
<ref name=bateman50>{{harvnb|Bateman|1922|p=50}}</ref>
<ref name=angier408>{{harvnb|Angier|1910|p=408}}</ref>
<ref name=nickels615>{{harvnb|Nickels|1890|p=615}}</ref>
<ref name=brock91>{{harvnb|Brock|2008|p=91}}</ref>
<ref name=overton7>{{harvnb|Price|Kellogg|Cox|1909|p=7}}</ref>
<ref name=orr255>{{harvnb|Orr|White|1990|p=255}}</ref>
<ref name=orr39>{{harvnb|Orr|White|1990|p=39}}</ref>
<ref name=speight77>{{harvnb|Speight|1994|p=77}}</ref>
<ref name=melber11>{{harvnb|Melber|Kielhorn|Mangelsdorf|2004|p=11}}</ref>
<ref name=speight456>{{harvnb|Speight|1994|p=456}}</ref>
<ref name=mushrush115>{{harvnb|Mushrush|Speight|1995|p=115}}</ref>
<ref name=greenhow58>{{harvnb|Greenhow|1965|p=58}}</ref>
<ref name=overton12>{{harvnb|Price|Kellogg|Cox|1909|p=12}}</ref>
<ref name=overton13>{{harvnb|Price|Kellogg|Cox|1909|p=13}}</ref>
<ref name=philips255>{{harvnb|Philips|1891|p=255}}</ref>
<ref name=martin416>{{harvnb|Martin|1913|pp=416–419}}</ref>
<ref name=nelson204>{{harvnb|Nelson|1907|p=204}}</ref>
<ref name=noller185>{{harvnb|Noller|1965|p=185}}</ref>
<ref name=salmon7>{{harvnb|Salmon|1901|pp=7–14}}</ref>
<ref name=seirogan>{{harvnb|Seirogan|2011}}</ref>
<ref name=cec2001>{{cite web |title=Commission Directive 2001/90/EC |work=Official Journal of the European Communities |via=eur-lex.europa.eu |date=27 October 2001 |url=https://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2001:283:0041:0043:EN:PDF}}</ref>
<ref name=cec2007>{{cite web |title=Commission Directive 76/769/EEC |work=Official Journal of the European Communities |via=eur-lex.europa.eu |date=3 October 2007 |url=https://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CONSLEG:1976L0769:20071003:EN:PDF}}</ref>
<ref name=hse2011>{{harvnb|Health and Safety Executive|2011}}</ref>
<ref name=creosotecouncil>{{harvnb|Creosote Council|2011}}</ref>
<ref name=ibach141>{{harvnb|Ibach|Miller|2007|loc=14-1&ndash;14-9}}</ref>
<ref name=joerin767>{{harvnb|Joerin|1909|p=767}}</ref>
<ref name=bradbury107>{{harvnb|Bradbury|1909|p=107}}</ref>
<ref name=farrar412>{{harvnb|Farrar|1880|pp=412–417}}</ref>
<ref name=farrar1>{{harvnb|Farrar|1893|pp=1–25}}</ref>
<ref name=pease>{{harvnb|Pease|1862}}</ref>
<ref name=hunt88>{{harvnb|Hunt|Garratt|1967|p=88}}</ref>
<ref name=voorhies>{{harvnb|Voorhies|1940}}</ref>
<ref name=stimson626>{{harvnb|Stimson|1914|p=626}}</ref>
<ref name=hunt97>{{harvnb|Hunt|Garratt|1967|p=97}}</ref>
<ref name=richardson103>{{harvnb|Richardson|1993|p=103}}</ref>
<ref name=eb821>{{harvnb|Encyclopædia Britannica|1949|p=821}}</ref>
<ref name=epa>{{cite web |title=Creosote (CASRN 8001-58-9) |work=[[Integrated Risk Information System]] (IRIS) |publisher=United States Environmental Protection Agency |date=September 7, 1988 |url=https://iris.epa.gov/ChemicalLanding/&substance_nmbr=360 |url-status=live |archive-url=https://web.archive.org/web/20000823042508/http://www.epa.gov/iris/subst/0360.htm |archive-date=2000-08-23}}</ref>
<ref name=wong683>{{harvnb|Wong|Harris|2005}}</ref>
<ref name=dhs>{{cite web |title=Heating Fires in Residential Buildings |year=2006 |url=http://www.usfa.dhs.gov/downloads/pdf/tfrs/v6i3.pdf |work=usfa.dhs.gov/ |url-status=dead |archive-url=https://web.archive.org/web/20100527133700/http://www.usfa.dhs.gov/downloads/pdf/tfrs/v6i3.pdf |archive-date=2010-05-27}}</ref>
<ref name=chenoweth206>{{harvnb|Chenoweth|1945|p=206}}</ref>
<ref name=Bolognini2002>{{harvnb|Bolognini et al|2002}}</ref>
<ref name=Delnao>{{harvnb|Delnao|1943}}</ref>
<ref name=Howard311>{{harvnb|Howard|1990|p=311}}</ref>
<ref name=MacLean1952>{{harvnb|MacLean|1952}}</ref>
<ref name="Shupe">{{harvnb|Shupe|Lebow|Ring|2008}}</ref>
<ref name="Smith 2002">{{harvnb|Smith|2002}}</ref>
<ref name="Shupe 2012">{{harvnb|Shupe|2012}}</ref>
<ref name="Connell 2005">{{harvnb|Connell|2005|pp=376–379}}</ref>
<ref name="Balsama et al 1984">{{harvnb|Balsama et al|1984}}</ref>
<ref name="Clarke">{{harvnb|Clarke|McFarland|1991}}</ref>
<ref name="Elder">{{harvnb|Elder|Dresler|1988}}</ref>
<ref name="Neff 2002">{{harvnb|Neff|2002}}</ref>
<ref name="United States Environmental Protection Agency-2008">{{cite web |title=Reregistration Eligibility Decision for Creosote (Case 0139) |publisher=United States Environmental Protection Agency |date=September 25, 2008 |url=https://archive.epa.gov/pesticides/reregistration/web/pdf/creosote_red.pdf |access-date=October 29, 2016}}</ref>
<ref name="Ramanand">{{harvnb|Ramanand|Suflita|1991}}</ref>
<ref name="Phelps">{{harvnb|Phelps|Young|1999}}</ref>
<ref name="Aronson et al 1999">{{harvnb|Aronson et al|1999}}</ref>
<ref name="Smolenski">{{harvnb|Smolenski|Suflita|1987}}</ref>
<ref name="Zazo et al 2005">{{harvnb|Zazo et al|2005}}</ref>
<!-- Not in use
<ref name=:21>{{harvnb|Hartnik et al|2007}}</ref>
-->
<ref name=wang2004>{{harvnb|Wang et al|2004}}</ref>
<ref name=Lovley1990>{{harvnb|Lovley|Lonergan|1990}}</ref>
<ref name=Bossert1986>{{harvnb|Bossert|Young|1986}}</ref>
<ref name=Weitkamp2011>{{harvnb|Weitkamp|Bennett|2011}}</ref>
}}

==References==
{{Refbegin|30em}}
*{{cite book |last1=Abel |first1=Ambrose |last2=Smith |first2=Elizur Goodrich |title=The preservation of food: From the "Aus der natur" of Abel |publisher=Press of Case, Lockwood and company |year=1857 |url=https://archive.org/details/preservationoffo00abel }}
*{{cite journal |last=Allen |first=Alfred Henry |journal=Allen's Commercial Organic Analysis |volume=3 |title=Creosote and Creosote oils |year=1910 |pages=346–391 |url=https://books.google.com/books?id=2oJgU1-40psC&pg=PA346 }}
*{{cite journal |last=American Pharmaceutical Association |journal=Proceedings of the American Pharmaceutical Association at the Annual Meeting |volume=43 |title=Creosote and Creosote oils |year=1895 |pages=1073 |url=https://books.google.com/books?id=D3ECAAAAYAAJ&pg=PA1073 }}
*{{cite journal |last=American Railway Bridge and Building Association |journal=Proceedings of the Annual Convention of the American Railway, Bridge and Building Association |volume=23 |title=Wood Preserving Creosotes: Methods of Production, Properties, Quality, Price and Quantity Consumed in the United States |year=1914 |pages=287–288 |url=https://books.google.com/books?id=ZrBIAAAAMAAJ&pg=PA350 }}
*{{cite journal |last=Angier |first=F.J. |journal=Railway Age Gazette |volume=48 |title=The seasoning and preservative treatment of wood ties |year=1910 |pages=408–411 |url=https://books.google.com/books?id=dKFMAAAAYAAJ&pg=PA408 }}
*{{cite report |last1=Aronson |first1=D. |last2=Citra |first2=M. |last3=Shuler |first3=K. |last4=Printup |first4=H. |last5=Howard |first5=P.H. |url=http://energytomorrow.org/~/media/files/ehs/clean_water/gw_other/aerobicbiodegrateconstantrpt1999pdf.pdf |title=Aerobic Biodegradation of Organic Chemicals in Environment Media: A Summary of Field and Laboratory Studies |date=January 27, 1999 |publisher=Environment Science Center Syracuse Research Corporation |url-status=dead |archive-url=https://web.archive.org/web/20161220185948/http://energytomorrow.org/~/media/files/ehs/clean_water/gw_other/aerobicbiodegrateconstantrpt1999pdf.pdf |archive-date=2016-12-20 |ref={{harvid |Aronson et al |1999}} }}
*{{cite journal |vauthors=Balsama S, Beltrame P, Beltrame PL, Carniti P, Forni L, Zuretti G |title=Alkylation of Phenol with Methanol over Zeolites |date=December 14, 1984 |journal=Applied Catalysis |doi=10.1016/S0166-9834(00)83334-5 |volume=13 |issue=1 |pages=161–170 |ref={{harvid |Balsama et al |1984}}}}
*{{cite book |last=Bateman |first=Ernest |title=Coal-tar and water-gas tar creosotes |publisher=Govt. print. off. |year=1922 |url=https://books.google.com/books?id=Uu6Miq64HXIC }}
*{{cite book |last=Berkeley |first=George |title=Siris: a Chain of Philosophical Reflexions and Inquiries Concerning the Virtues of Tar Water: And Divers Other Subjects Connected Together and Arising One from Another |location=Dublin; London |publisher=W. Innys, C. Hitch, C. Davis |year=1744 |url=https://books.google.com/books?id=c10uAAAAYAAJ }}
*{{cite book |last=Bernheim |first=Samuel |title=La Tuberculose et la médication créosotée |publisher=Maloine |year=1901 |location=Paris |url=https://archive.org/details/latuberculoseet00berngoog }}
*{{cite journal |vauthors=Bolognini M, Cavani F, Scagliarini D, Flego C, Perego C, Sabo M |date=July 2002 |title=Heterogeneous Basic Catalysts as Alternative to Homogeneous Catalysts:Reactivity of Mg/Al mixed Oxides in the Alkylation of m-Cresol with Methanol |journal=Catalysis Today |volume=75 |issue=1 |pages=103–111 |doi=10.1016/S0920-5861(02)00050-0 |ref={{harvid |Bolognini et al |2002}}}}
*{{cite journal |vauthors=Bossert ID, Young LY |title=Anaerobic oxidation of p-cresol by a denitrifying bacterium |pmid=3789714 |volume=52 |issue=5 |pmc=239183 |journal=Applied and Environmental Microbiology |date=November 1986 |pages=1117–22 |bibcode=1986ApEnM..52.1117B |doi=10.1128/AEM.52.5.1117-1122.1986}}
*{{cite journal |last=Bradbury |first=Robert H. |journal=Journal of the Franklin Institute |volume=168 |issue=2 |title=Increase in the use of wood preservatives indicates progress in wood preservation |year=1909 |page=107 |doi=10.1016/s0016-0032(09)90070-9 |url=https://books.google.com/books?id=jOAGAAAAYAAJ&pg=PA107 }}
*{{cite book |last=Brock |first=William Hodson |title=William Crookes and the commercialization of science |publisher=Ashgate Publishing, Ltd |year=2008 |isbn=9780754663225 |url=https://books.google.com/books?id=Dd75mKOE4BMC }}
*{{cite journal |last=Chemist and Druggist |journal=Chemist and Druggist |volume=35 |title=Tar Water |year=1889 |pages=300 |url=https://books.google.com/books?id=-C_OAAAAMAAJ&pg=PA300 }}
*{{cite book |last=Chenoweth |first=Walter Winfred |title=How to preserve food |publisher=Houghton Mifflin company |year=1945 |url=https://books.google.com/books?id=NCZBAAAAYAAJ }}
*{{cite report |last1=Clarke |first1=Joan U. |last2=McFarland |first2=Victor A. |title=Assessing Bioaccumulation in Aquatic Organisms Exposed to Contaminated Sediments |publisher=US Army Corps of Engineers |date=July 1991 |url=https://ratical.org/radiation/radioactivity/mpd91-2.pdf |access-date=October 29, 2016 }}
*{{cite book |last=Coblentz |first=Virgil |title=The Newer Remedies ...: A Reference Manual for Physicians, Pharmacists and Students |publisher=Apothecary Publishing |year=1908 |url=https://books.google.com/books?id=L3PtAAAAMAAJ }}
*{{cite book |last=Connell |first=Des |title=Basic Concepts of Environmental Chemistry |edition=2nd |publisher=CRC Press |isbn=9780203025383 |date=July 14, 2005 |url=https://books.google.com/books?id=Cs7KBQAAQBAJ&pg=PA376 |access-date=April 7, 2019 }}
*{{cite journal |last=Contrepois |first=Alain |journal=Medical History |volume=46 |title=The Clinician, Germs and Infectious Diseases: The Example of Charles Bouchard in Paris |year=2002 |pmc=1044495 |pages=197–220 |pmid=12024808 |issue=2 |doi=10.1017/S0025727300069088}}
*{{cite book |last=Cormack |first=Sir John Rose |title=A treatise on the chemical, medicinal, and physiological properties of creosote: illustrated by experiments on the lower animals: with some considerations on the embalment of the Egyptians. Being the Harveian prize dissertation for 1836 |publisher=J. Carfrae & Son |year=1836 |url=https://archive.org/details/atreatiseonchem00cormgoog }}
*{{cite web |last=Creosote Council |title=Regulation |year=2011 |work=creosotecouncil.org/ |url=http://creosotecouncil.org/creosote-council-regulation.html |url-status=dead |archive-url=https://archive.today/20110504000438/http://creosotecouncil.org/creosote-council-regulation.html |archive-date=2011-05-04 }}
*{{cite web |last=Delnao |first=Jack |title=At the Santa Fe R.R. tie plant, Albuquerque, N[ew] Mex[ico]... |publisher=[[Library of Congress]] |website=Prints & Photographs Online Catalog |date=March 1943 |url=https://www.loc.gov/pictures/item/fsa1992000781/PP/ |access-date=16 February 2015 }}
*{{cite journal |last=Dobbell |first=Horace |journal=Annual Reports on Diseases of the Chest |volume=3 |title=Carbolic acid and creosote |year=1878 |page=315 |url=https://books.google.com/books?id=B1K6TM4YqfIC&pg=PA315 }}
*{{Cite book |last=Dunglison |first=Robley |date=1846 |publisher=Lea and Blanchard |url=https://books.google.com/books?id=PFoQAAAAYAAJ&q=Binelli&pg=PA64 |title=Medical Lexicon: A Dictionary of Medical Science: Containing a Concise Explanation of the Various Subjects and Terms, with the French and Other Synonymes, Notices of Climate, and of Celebrated Mineral Waters, Formulae for Various Officinal and Empirical Preparations, Etc}}
*{{cite journal |vauthors=Elder JF, Dresler PV |title=Accumulation and bioconcentration of polycyclic aromatic hydrocarbons in a nearshore estuarine environment near a Pensacola (Florida) creosote contamination site |journal=Environmental Pollution |volume=49 |issue=2 |pages=117–132 |pmid=15092667 |doi=10.1016/0269-7491(88)90244-8 |date=1988 |url=https://pubs.er.usgs.gov/publication/70013655 |access-date=October 29, 2016 }}
*{{cite book |last=Encyclopædia Britannica |title=Encyclopædia Britannica: a new survey of universal knowledge |volume=21 |publisher=Encyclopædia Britannica |year=1949 |url=https://books.google.com/books?id=OKYRAQAAMAAJ }}
*{{cite journal |last=Engineering and Contracting |journal=Engineering and Contracting |volume=38 |issue=13 |title=Wood Preserving Creosotes: Methods of Production, Properties, Quality, Price and Quantity Consumed in the United States |year=1912 |pages=350–353 |url=https://books.google.com/books?id=xKfmAAAAMAAJ&pg=PA350 }}
*{{cite journal |last=Farrar |first=J.N. |journal=Annals of Anatomy and Surgery |volume=2 |title=On the comparative value of sulphuric acid and creosote in the treatment of alveolar cavities |year=1880 |pages=412–418 |url=https://books.google.com/books?id=ZZNXAAAAMAAJ&pg=PA412 }}
*{{cite journal |last=Farrar |first=J.N. |journal=Transactions of the New York Ondontological Society |title=Pulpless teeth; abscess; treatment, especially surgical treatment |year=1893 |pages=1–25 |url=https://books.google.com/books?id=zzu1AAAAIAAJ&pg=PA1 }}
*{{cite book |last=Greenhow |first=E.J. |title=Wood |volume=30 |publisher=Tothill Press |year=1965 |url=https://books.google.com/books?id=E80bAQAAMAAJ }}
*{{cite journal |vauthors=Hartnik T, Norli HR, Eggen T, Breedveld GD |title=Bioassay-directed identification of toxic organic compounds in creosote-contaminated groundwater |date=January 2007 |journal=Chemosphere |doi=10.1016/j.chemosphere.2006.06.031 |volume=66 |issue=3 |pages=435–443 |pmid=16872665 |bibcode=2007Chmsp..66..435H |ref={{harvid |Hartnik et al |2007}}}}
*{{cite web |last=Health and Safety Executive |title=Revocation of approvals for amateur creosote/coal tar creosote wood preservatives |year=2011 |work=hse.gov.uk/ |url=http://www.hse.gov.uk/biocides/copr/creosote.htm |access-date=2009-07-04 |archive-date=2010-11-11 |archive-url=https://web.archive.org/web/20101111173106/http://www.hse.gov.uk/biocides/copr/creosote.htm |url-status=dead }}
*{{cite book |last=Hodson |first=E.R. |title=Rules and Regulations for the Grading of Lumber |publisher=Government printing office |year=1906 |url=https://books.google.com/books?id=Q8JEAQAAIAAJ }}
*{{cite book |last=Howard |first=Phillip |title=Handbook of Environmental Fate and exposure Data for Organic Chemicals, Volume 2 |publisher=CRC Press |isbn=9780873712040 |date=February 28, 1990 |url=https://books.google.com/books?id=MwH48Ct3sFEC&pg=PA311 |access-date=October 28, 2016 }}
*{{cite book |last1=Hunt |first1=George McMonies |last2=Garratt |first2=George Alfred |title=Wood preservation |publisher=McGraw-Hill |year=1967 |url=https://books.google.com/books?id=aSQyAAAAMAAJ }}
*{{cite book |last1=Ibach |first1=Rebecca E. |last2=Miller |first2=Regis B. |title=The Encyclopedia of Wood |publisher=Skyhorse Publishing Inc |year=2007 |url=https://books.google.com/books?id=nZIbAQAAMAAJ }}
*{{cite journal |last=Imlay |first=G. Anderson |journal=The Medical Times and Gazette |volume=2 |title=New outlooks in the prophylaxis and treatment of tuberculosis |year=1876 |page=514 |url=https://books.google.com/books?id=3sZXAAAAMAAJ&pg=PA514 }}
*{{cite journal |last=Joerin |first=A.E. |journal=Popular Mechanics |volume=48 |title=The seasoning and preservative treatment of wood ties |page=767 |date=December 1909 |url=https://books.google.com/books?id=SN8DAAAAMBAJ&pg=PA767 }}
*{{cite journal |last1=King |first1=John |last2=Felter |first2=Harvey Wickes |last3=Lloyd |first3=John Uri |journal=King's American Dispensatory |volume=1 |title=Creosote |year=1905 |url=https://books.google.com/books?id=xqkMAAAAYAAJ&pg=PA616 |pages=616–617}}
*{{cite journal |last=Kinnicutt |first=Francis P. |journal=Boston Medical and Surgical Journal |volume=126 |issue=21 |title=New outlooks in the prophylaxis and treatment of tuberculosis |year=1892 |pages=513–518 |doi=10.1056/nejm189205261262101 |url=https://books.google.com/books?id=jb8EAAAAYAAJ&pg=PA514 }}
*{{cite journal |last1=Lee |first1=Kwang-Guen |last2=Lee |first2=Sung-Eun |last3=Takeoka |first3=Gary R. |last4=Kim |first4=Jeong-Han |last5=Park |first5=Byeoung-Soo |journal=[[Journal of the Science of Food and Agriculture]] |volume=85 |issue=9 |title=Antioxidant activity and characterization of volatile constituents of beechwood creosote |pages=1580–1586 |doi=10.1002/jsfa.2156 |date=July 2005 |bibcode=2005JSFA...85.1580L |url=http://ddr.nal.usda.gov/handle/10113/19306 |access-date=2011-07-25 |url-status=dead |archive-url=https://web.archive.org/web/20120328041820/http://ddr.nal.usda.gov/handle/10113/19306 |archive-date=2012-03-28 }}
*{{cite book |last=Letheby |first=Henry |title=On food: its varieties, chemical composition, nutritive value, comparative digestibility, physiological functions and uses, preparation, culinary treatment, preservation, adulteration, etc |publisher=Longmans, Green |year=1870 |url=https://archive.org/details/b21951081 }}
*{{cite journal |vauthors=Lovley DR, Lonergan DJ |title=Anaerobic Oxidation of Toluene, Phenol, and p-Cresol by the Dissimilatory Iron-Reducing Organism, GS-15 |issue=6 |date=June 1990 |pages=1858–1864 |journal=Applied and Environmental Microbiology |volume=56 |pmid=16348226 |pmc=184522 |bibcode=1990ApEnM..56.1858L |doi=10.1128/AEM.56.6.1858-1864.1990}}
*{{cite report |last=MacLean |first=J.D. |title=Preservative Treatment of Wood by Pressure Methods |publisher=United States Department of Agriculture, Forest Service |id=Handbook No. 40 |date=December 1952 |url=https://www.fpl.fs.fed.us/documnts/usda/ah40.pdf |access-date=April 7, 2019 }}
*{{cite book |last=Martin |first=Geoffrey |title=Industrial and manufacturing chemistry: a practical treatise |volume=1 |publisher=Appleton |year=1913 |url=https://books.google.com/books?id=X7OEAAAAIAAJ }}
*{{cite journal |last=Martin |first=Stanlisas |journal=British Journal of Dental Science |volume=5 |title=Solidified Creosote |year=1862 |page=290 |url=https://books.google.com/books?id=ePUaAQAAMAAJ&pg=PA290 }}
*{{cite report |last1=Melber |first1=Christine |last2=Kielhorn |first2=Janet |last3=Mangelsdorf |first3=Inge |title=Coal Tar Creosote |publisher=United Nations Environment Programme, International Labour Organization, and World Health Organization |year=2004 |url=https://www.who.int/ipcs/publications/cicad/en/CICAD62.pdf }}
*{{cite journal |last1=Mueller |first1=J.G. |last2=Chapman |first2=P.J. |last3=Pritchard |first3=P.H. |journal=Applied and Environmental Microbiology |title=Action of a Fluoranthene-Utilizing Bacterial Community on Polycyclic Aromatic Hydrocarbon Components of Creosote |pmc=203227 |pmid=16348069 |volume=55 |issue=12 |date=December 1989 |pages=3085–90 |bibcode=1989ApEnM..55.3085M |doi=10.1128/AEM.55.12.3085-3090.1989}}
*{{cite book |last1=Mushrush |first1=George C. |last2=Speight |first2=J.G. |title=Petroleum products: instability and incompatibility |publisher=CRC Press |year=1995 |isbn=9781560322979 |url=https://books.google.com/books?id=kTClrgGyc5oC }}
*{{cite book |last=Neff |first=J.M. |title=Bioaccumulation in Marine Organisms: Effect of Contamination from Oil Well Produced Water |publisher=Elsevier |isbn=9780080527840 |date=2002 |url=https://books.google.com/books?id=ABIQ_FGKOZcC&pg=PA207 |access-date=October 29, 2016 }}
*{{cite book |last=Nelson |first=Thomas |title=Nelson's encyclopaedia: everybody's book of reference |volume=3 |publisher=Thomas Nelson |year=1907 |url=https://books.google.com/books?id=WawrAAAAYAAJ }}
*{{cite encyclopedia |last=Nickels |first=Benjamin |editor-last=Thorpe |editor-first=Thomas Edward |encyclopedia=A Dictionary of Applied Chemistry |volume=1 |title=Creosote |year=1890 |pages=614–620 |url=https://books.google.com/books?id=_4oLAQAAIAAJ&pg=PA614 }}
*{{cite book |last=Noller |first=Carl Robert |title=Chemistry of organic compounds |publisher=Saunders |year=1965 |url-access=registration |url=https://archive.org/details/chemistryoforgan00noll }}
*{{cite book |last1=Orr |first1=Wilson L. |last2=White |first2=Curt M. |title=Geochemistry of sulfur in fossil fuels |publisher=American Chemical Society |year=1990 |isbn=9780841218048 |url=https://books.google.com/books?id=amp8AAAAIAAJ }}
*{{cite book |last=Parr |first=Bartholemew |title=The London Medical Dictionary, including under distinct heads every branch of medecine |volume=1 |publisher=J. Johnson |year=1809 |url=https://books.google.com/books?id=iy8_AAAAcAAJ }}
*{{cite journal |last=Pease |first=William A. |journal=British Journal of Dental Science |volume=5 |title=Arsenic, its application and use |year=1862 |pages=417–426 |url=https://books.google.com/books?id=ePUaAQAAMAAJ&pg=PA417 }}
*{{cite journal |last=Pharmaceutical Society of Great Britain |journal=Pharmaceutical Journal: A Weekly Record of Pharmacy and Allied Sciences |volume=61 |title=Creosotum |year=1898 |page=468 |url=https://books.google.com/books?id=izvOAAAAMAAJ&pg=PA468 }}
*{{cite journal |vauthors=Phelps CD, Young LY |title=Anaerobic biodegradation of BTEX and gasoline in various aquatic sediments |pmid=10423837 |volume=10 |issue=1 |journal=Biodegradation |date=February 1999 |pages=15–25 |s2cid=23687943 |doi=10.1023/a:1008303729431}}
*{{cite book |last=Philips |first=H. Joshua |title=Engineering chemistry: a practical treatise for the use of analytical chemists, engineers, ironmasters, iron founders, students, and others |publisher=C. Lockwood & son |year=1891 |url=https://books.google.com/books?id=UgBIAAAAIAAJ }}
*{{cite book |last=Pliny |title=Pliny's Natural History, Volume 3 |publisher=H. G. Bohn |year=1855 |url=https://archive.org/details/naturalhistoryp01bostgoog }}
*{{cite book |last=Pliny |title=Pliny's Natural History, Volume 5 |publisher=H. G. Bohn |year=1856 |url=https://books.google.com/books?id=NnRiAAAAMAAJ }}
*{{cite book |last1=Price |first1=Overton W. |last2=Kellogg |first2=R.S. |last3=Cox |first3=W.T. |title=Forests of the United States: Their Use |publisher=Government printing office |year=1909 |url=https://archive.org/details/forestsofuniteds17pric}}
*{{cite journal |vauthors=Ramanand K, Suflita JM |title=Anaerobic degradation of m-cresol in anoxic aquifer slurries: carboxylation reactions in a sulfate-reducing bacterial enrichment |journal=Applied and Environmental Microbiology |pmc=183453 |pmid=1872602 |volume=57 |issue=6 |date=June 1991 |pages=1689–95 |bibcode=1991ApEnM..57.1689R |doi=10.1128/AEM.57.6.1689-1695.1991}}
*{{cite journal |last=Renard |first=Adolphe |journal=Journal of the Chemical Society |volume=68 |issue=1 |title=Pine Tar |year=1895 |pages=294 |url=https://books.google.com/books?id=JOg4AAAAMAAJ&pg=294 }}
*{{cite book |last=Richardson |first=Barry A. |title=Wood preservation |publisher=Taylor & Francis |year=1993 |isbn=9780419174905 |url=https://books.google.com/books?id=wY_5fzc5ugEC }}
*{{cite journal |last1=Roscoe |first1=Henry Enfield |last2=Schorlemmer |first2=Carl |journal=A Treatise on Chemistry: The Hydrocarbons and Their Derivatives or Organic Chemistry |volume=3 |title=Creosote and Creosote oils |year=1888 |issue=4 |pages=32–37 |url=https://books.google.com/books?id=1NnnAAAAMAAJ&pg=PA32 }}
*{{cite book |last=Salmon |first=D.E. |title=Relationship of bovine tuberculosis to public health |publisher=Government printing office |year=1901 |url=https://books.google.com/books?id=nZIbAQAAMAAJ }}
*{{cite journal |last=Schorlemmer |first=C. |journal=Journal of the Society of Chemical Industry |volume=4 |title=The history of creosote, cedriret, and pittacal |year=1885 |pages=152–157 |url=https://books.google.com/books?id=OCTzAAAAMAAJ&pg=PA152 }}
*{{cite web |last=Seirogan |title=A Gift from the Forest |year=2011 |work=seirogan.co.jp/ |url=http://www.seirogan.co.jp/en/products/seirogan/truth/smell.html }}
*{{cite web |last1=Shupe |first1=Todd |last2=Lebow |first2=Stan |last3=Ring |first3=Dennis |title=Causes and Control of Wood Decay, Degradation and Stain |publisher=LSU Agricultural Center |date=June 2008 |url=http://www.lsuagcenter.com/NR/rdonlyres/C29C1E6F-2F5B-4F0D-A963-248E54EB4E83/51180/pub2703WoodDecayLowRes.pdf |access-date=October 28, 2016 }}
*{{cite web |last=Shupe |first=Todd |title=Marine Wood Borers |publisher=LSU Agricultural Center |date=September 27, 2012 |url=http://www.lsuagcenter.com/topics/environment/forestry/forest_products/marine-wood-borers |url-status=dead |archive-url=https://web.archive.org/web/20160905010110/http://www.lsuagcenter.com/topics/environment/forestry/forest_products/marine-wood-borers |archive-date=2016-09-05 }}
*{{Cite thesis |last=Simon |first=Carl Gustav Theodor |date=1833 |url=https://books.google.com/books?id=JxdPAAAAcAAJ&pg=PA5 |title=De aquae Binelli et Kreosoti virtute styptica |location=Berlin |publisher=Nietack |language=la}}
*{{cite web |last=Smith |first=Stephen |title=Environmental Issues Related to the Use of Creosote Wood Preservative |via=ResearchGate |publisher=AquAeTer |date=May 31, 2002 |url=https://www.researchgate.net/publication/240621681 |access-date=October 28, 2016 }}
*{{cite journal |vauthors=Smolenski WJ, Suflita JM |title=Biodegradation of Cresol Isomers in Anoxic Aquifers |journal=Applied and Environmental Microbiology |volume=53 |issue=4 |date=April 1987 |pages=710–716 |pmid=3579279 |pmc=203742 |bibcode=1987ApEnM..53..710S |doi=10.1128/AEM.53.4.710-716.1987}}
*{{cite book |last=Speight |first=J.G. |title=The chemistry and technology of coal |publisher=CRC Press |year=1994 |isbn=9780824792008 |url=https://books.google.com/books?id=kJkSDJtbxyEC }}
*{{cite journal |last=Stimson |first=Earl |journal=Proceedings of the Annual Convention of the American Railway, Bridge and Building Association |volume=15 |title=Report of the committee XVII on wood preservation |year=1914 |pages=625–633 |url=https://books.google.com/books?id=2DdLAAAAMAAJ&pg=PA625 }}
*{{cite journal |last=Taylor |first=C.F. |journal=The Medical World |volume=20 |title=Creosote |year=1902 |page=207 |url=https://books.google.com/books?id=2NBXAAAAMAAJ&pg=PA207 }}
*{{Cite journal |last1=Tsiamis |first1=Costas |last2=Sgantzou |first2=Ioanna |last3=Popoti |first3=Panagiota |last4=Papavramidou |first4=Niki |last5=Sgantzos |first5=Markos |date=2020-03-06 |title=Dimitrios Mavrokordatos Disproving the Hemostatic Myth of Aqua Binelli |journal=Surgical Innovation |volume=27 |issue=3 |pages=307–310 |doi=10.1177/1553350620907428 |pmid=32141402 |s2cid=212567440 |issn=1553-3506}}
*{{cite book |last=Vitet |first=Louis |title=Pharmacopée de Lyon, ou exposition méthodique des médicaments simples et composés |publisher=Chez les Freres Perisse |year=1778 |url=https://books.google.com/books?id=O8nvjoqDQA8C }}
*{{cite thesis |last=Voorhies |first=Glenn |title=Oil tar creosote for wood preservation |type=Masters |publisher=Oregon State University |date=June 1940 |url=https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/j6731616d |via=ScholarsArchive@OSU}}
*{{cite journal |vauthors=Wang F, Yang G, Zhang W, Wu W, Xu J |title=Oxidation of p-Cresol to p-Hydroxybenzaldehyde with Molecular Oxygen in the Presence of CuMn-Oxide Heterogeneous Catalyst |date=June 2004 |journal=Advanced Synthesis and Catalysis |doi=10.1002/adsc.200303226 |volume=346 |issue=6 |pages=633–638 |ref={{harvid |Wang et al |2004}}}}
*{{cite report |last1=Weitkamp |first1=Don |last2=Bennett |first2=Jesse |title=Creosote Release from Cut/broken Piles, Asarco Smelter Site |publisher=Parametrix |location=Bellevue, WA |date=June 2011 |url=http://www.wwpinstitute.org/documents/CreosoteReleasefinal110614.pdf |url-status=dead |archive-url=https://web.archive.org/web/20160812092931/http://www.wwpinstitute.org/documents/CreosoteReleasefinal110614.pdf |archive-date=2016-08-12 }}
*{{cite journal |last=Whittaker |first=J.T. |journal=Transactions of the Association of American Physicians |volume=8 |title=Creosote in Tuberculosis Pulmonum |year=1893 |pages=77–90 |url=https://books.google.com/books?id=vMoCAAAAYAAJ&pg=PA77 }}
*{{cite journal |vauthors=Wong O, Harris F |title=Retrospective cohort mortality study and nested case-control study of workers exposed to creosote at 11 wood-treating plants in the United States |journal=J. Occup. Environ. Med. |volume=47 |issue=7 |date=July 2005 |pages=683–97 |pmid=16010195 |s2cid=6571472 |doi=10.1097/01.jom.0000165016.71465.7a}}
*{{cite journal |vauthors=Zazo JA, Casas JA, Mohedano AF, Gilarranz MA, Rodríguez JJ |title=Chemical Pathway and Kinetics of Phenol Oxidation by Fenton's Reagent |journal=Environmental Science & Technology |volume=39 |issue=23 |pages=9295–9302 |date=October 26, 2005 |doi=10.1021/es050452h |pmid=16382955 |bibcode=2005EnST...39.9295Z |ref={{harvid |Zazo et al |2005}}}}
{{Refend}}

==External links==
{{Commons category|Creosote}}

{{Non-timber forest products}}

[[Category:Chemical mixtures]]
[[Category:Expectorants]]
[[Category:IARC Group 2A carcinogens]]
[[Category:Non-timber forest products]]