Editing Blind transmission

{{Short description|Telecommunications transmission without receipt}}
A '''blind transmission''', in [[telecommunications]], is a transmission made without obtaining a receipt, or acknowledgment of reception, from the intended receiving station. Blind transmissions may occur or be necessary when security constraints, such as radio silence, are imposed, when technical difficulties with a sender's [[Communications receiver|receiver]] or receiver's [[transmitter]] occur, or when lack of time precludes the delay caused by waiting for receipts.

==Examples==
*In aviation it is common to "transmit in the blind" when an aircraft is approaching a non-towered airport. The pilot will broadcast his position and intentions over a common frequency. If no other aircraft are in the traffic pattern, the pilot continues to transmit his position in the blind in case another aircraft is in the area but unable to respond.<ref>[https://www.faa.gov/documentlibrary/media/advisory_circular/ac_90-66b.pdf ''Non Towered Airport Flight Operations'']</ref>
*If [[air traffic control]] is attempting to establish communication with a presumed [[NORDO]] aircraft, or aircraft on the incorrect frequency, it would be appropriate phraseology to issue a transmission that includes the blind preamble, e.g., ''"New York Center in the blind, N1234, if you copy this transmission, squawk ident."''
*The less common reason would be a [[UAV ground control station|ground control station]] not being able to transmit (due to transmitter failure) or not wanting to transmit any acknowledgment (to avoid giving away further information and putting a military mission at risk).

==See also==
*[[Transmission time]]

==References==
{{Reflist}}
*{{Cite web |url=http://www.its.bldrdoc.gov/fs-1037/fs-1037c.htm |title=Federal Standard 1037C Telecom Glossary 2000:Blind Transmission |access-date=2008-06-26 |publisher=[[Institute for Telecommunication Sciences]]}}

[[Category:Telecommunications techniques]]


{{telecomm-stub}}