Editing Snowboard (section)

===Strap-in===
{{Unreferenced section|date=June 2011}}
These are the most popular bindings in snowboarding. Before snowboard specific boots existed, snowboarders used any means necessary to attach their feet to their snowboards and gain the leverage needed for turning. Typical boots used in these early days of snowboarding were Sorels or snowmobile boots. These boots were not designed for snowboarding and did not provide the support desired for doing turns on the heel edge of a snowboard. As a result, early innovators such as Louis Fournier conceived the "high-back" binding design which was later commercialized and patented by Jeff Grell. The highback binding is the technology produced by most binding equipment manufacturers in the snowboard industry. The leverage provided by highbacks greatly improved board control. Snowboarders such as Craig Kelly adapted plastic "tongues" to their boots to provide the same support for toe-side turns that the highback provided for heel-side turns. In response, companies such as Burton and Gnu began to offer "tongues".

With modern strap bindings, the rider wears a boot which has a thick but flexible sole, and padded uppers. The foot is held onto the board with two buckle straps – one strapped across the top of the toe area, and one across the ankle area. They can be tightly ratcheted closed for a tight fit and good rider control of the board. Straps are typically padded to more evenly distribute pressure across the foot. While nowhere near as popular as two-strap bindings, some people prefer three-strap bindings for more specialized riding such as carving. The third strap tends to provide additional stiffness to the binding.

Cap-strap bindings are a recent modification that provide a very tight fit to the toe of the boot, and seats the boot more securely in the binding. Numerous companies have adopted various versions of the cap strap.