Editing Central processing unit (section)

===Execute===
After the fetch and decode steps, the execute step is performed. Depending on the CPU architecture, this may consist of a single action or a sequence of actions. During each action, control signals electrically enable or disable various parts of the CPU so they can perform all or part of the desired operation. The action is then completed, typically in response to a clock pulse. Very often the results are written to an internal CPU register for quick access by subsequent instructions. In other cases results may be written to slower, but less expensive and higher capacity [[random-access memory|main memory]].

For example, if an instruction that performs addition is to be executed, registers containing operands (numbers to be summed) are activated, as are the parts of the [[arithmetic logic unit]] (ALU) that perform addition. When the clock pulse occurs, the operands flow from the source registers into the ALU, and the sum appears at its output. On subsequent clock pulses, other components are enabled (and disabled) to move the output (the sum of the operation) to storage (e.g., a register or memory). If the resulting sum is too large (i.e., it is larger than the ALU's output word size), an arithmetic overflow flag will be set, influencing the next operation.