Editing Solder (section)

== Flux {{anchor|Flux core solder}} ==
[[File:Rosin core electrical solder.JPG|thumb|right|Electrical solder with an integrated rosin core, visible as a dark spot in the cut end of the solder wire.]]
{{Main|Flux (metallurgy)}}
[[Flux (metallurgy)|Flux]] is a [[reducing agent]] designed to help [[redox|reduce]] (return oxidized metals to their metallic state) metal oxides at the points of contact to improve the electrical connection and mechanical strength. The two principal types of flux are acid flux (sometimes called "active flux"), containing strong acids, used for metal mending and plumbing, and [[rosin]] flux (sometimes called "passive flux"), used in electronics. Rosin flux comes in a variety of "activities", corresponding roughly to the speed and effectiveness of the organic acid components of the rosin in dissolving metallic surface oxides, and consequently the corrosiveness of the flux residue.

Due to concerns over [[atmospheric pollution]] and [[hazardous waste]] disposal, the [[electronics industry]] has been gradually shifting from rosin flux to water-soluble flux, which can be removed with [[deionized water]] and [[detergent]], instead of [[hydrocarbon]] [[solvent]]s. Water-soluble fluxes are generally more conductive than traditionally used electrical / electronic fluxes and so have more potential for electrically interacting with a circuit; in general it is important to remove their traces after soldering. Some rosin type flux traces likewise should be removed, and for the same reason.

In contrast to using traditional bars or coiled wires of all-metal solder and manually applying flux to the parts being joined, much hand soldering since the mid-20th century has used flux-core solder. This is manufactured as a coiled wire of solder, with one or more continuous bodies of inorganic acid or rosin flux embedded lengthwise inside it. As the solder melts onto the joint, it frees the flux and releases that on it as well.