Editing Direct memory access (section)

== Cache coherency ==
[[File:Cache incoherence write.svg|upright=1|Cache incoherence due to DMA]]

DMA can lead to [[cache coherency]] problems. Imagine a CPU equipped with a cache and an external memory that can be accessed directly by devices using DMA. When the CPU accesses location X in the memory, the current value will be stored in the cache. Subsequent operations on X will update the cached copy of X, but not the external memory version of X, assuming a [[write-back cache]]. If the cache is not flushed to the memory before the next time a device tries to access X, the device will receive a stale value of X.

Similarly, if the cached copy of X is not invalidated when a device writes a new value to the memory, then the CPU will operate on a stale value of X.

This issue can be addressed in one of two ways in system design: Cache-coherent systems implement a method in hardware, called [[bus snooping]], whereby external writes are signaled to the cache controller which then performs a [[cache invalidation]] for DMA writes or cache flush for DMA reads. Non-coherent systems leave this to software, where the OS must then ensure that the cache lines are flushed before an outgoing DMA transfer is started and invalidated before a memory range affected by an incoming DMA transfer is accessed. The OS must make sure that the memory range is not accessed by any running threads in the meantime. The latter approach introduces some overhead to the DMA operation, as most hardware requires a loop to invalidate each cache line individually.

Hybrids also exist, where the secondary L2 cache is coherent while the L1 cache (typically on-CPU) is managed by software.
<!-- TODO: how is this problem worked around? -->