Editing Electronics (section)

=== Analog circuits ===
{{Main|Analog electronics}}
[[Analog circuits]] use a continuous range of voltage or current for signal processing, as opposed to the discrete levels used in digital circuits. Analog circuits were common throughout an electronic device in the early years in devices such as radio receivers and transmitters. Analog electronic computers were valuable for solving problems with continuous variables until digital processing advanced.

As semiconductor technology developed, many of the functions of analog circuits were taken over by digital circuits, and modern circuits that are entirely analog are less common; their functions being replaced by hybrid approach which, for instance, uses analog circuits at the ''front end'' of a device receiving an analog signal, and then use digital processing using [[microprocessor]] techniques thereafter.

Sometimes it may be difficult to classify some circuits that have elements of both linear and non-linear operation. An example is the voltage comparator which receives a continuous range of voltage but only outputs one of two levels as in a digital circuit. Similarly, an overdriven transistor amplifier can take on the characteristics of a controlled [[switch]], having essentially two levels of output.

Analog circuits are still widely used for signal amplification, such as in the entertainment industry, and conditioning signals from analog sensors, such as in industrial measurement and control.