Editing Flexagon (section)

== Varieties ==
=== Tetraflexagons ===

==== Tritetraflexagon ====
[[File:Tritetraflexagon-net.PNG|thumb|alt=Diagram for folding a tritetraflexagon|A tritetraflexagon can be folded from a strip of paper as shown.]]
[[File:Tritetraflexagon-flexing.PNG|thumb|alt=Sides of a tritetraflexagon|This figure has two faces visible, built of squares marked with ''A''s and ''B''s. The face of ''C''s is hidden inside the flexagon.]]

The tritetraflexagon is the simplest tetraflexagon (flexagon with [[square (geometry)|square]] sides). The "tri" in the name means it has three faces, two of which are visible at any given time if the flexagon is pressed flat. The construction of the tritetraflexagon is similar to the mechanism used in the traditional [[Jacob's ladder (toy)|Jacob's Ladder]] children's toy, in [[Rubik's Magic]] and in the magic wallet trick or the [[Richard Himber|Himber]] wallet.

The tritetraflexagon has two dead ends, where you cannot flex forward. To get to another face you must either flex backwards or flip the flexagon over.
[[File:Tritetraflexagon traverse.svg|thumb|Tritetraflexagon traverse|221x221px]]

==== Hexatetraflexagon ====
A more complicated cyclic hexatetraflexagon requires no gluing. A cyclic hexatetraflexagon does not have any "dead ends", but the person making it can keep folding it until they reach the starting position. If the sides are colored in the process, the states can be seen more clearly.
[[File:Hexatetraflexagon traverse.svg|thumb|221x221px|Hexatetraflexagon traverse]]
Contrary to the tritetraflexagon, the hexatetraflexagon has no dead ends, and does not ever need to be flexed backwards.

=== Hexaflexagons ===
Hexaflexagons come in great variety, distinguished by the number of faces that can be achieved by flexing the assembled figure. (Note that the word ''hexaflexagons'' [with no prefixes] can sometimes refer to an ordinary hexahexaflexagon, with six sides instead of other numbers.)

==== Trihexaflexagon ====
[[File:Trihexaflexagon_example.png|thumb|This trihexaflexagon template shows 3 colors of 9 triangles, printed on one side, and folded to be colored on both sides. The two yellow triangles on the ends will end up taped together. The red and blue arcs are seen as full circles on the inside of one side or the other when folded.]]

A hexaflexagon with three faces is the simplest of the hexaflexagons to make and to manage, and is made from a single strip of paper, divided into nine equilateral triangles. (Some patterns provide ten triangles, two of which are glued together in the final assembly.)

To assemble, the strip is folded every third triangle, connecting back to itself after three inversions in the manner of the international [[recycling symbol]]. This makes a [[Möbius strip]] whose single edge forms a [[trefoil knot]].

==== Hexahexaflexagon ====
This hexaflexagon has six faces. It is made up of nineteen triangles folded from a strip of paper.
[[File:Hexahexaflexagon template.svg|thumb|center|600px|alt=A strip of paper, divided into triangles, which can be folded into a hexaflexagon.]]

[[File:hexaflexagon-construction-and-use.jpg|thumb|400px|alt=A series of photos detailing construction and "flexing" of a hexaflexagon|Figures 1-6 show the construction of a hexaflexagon made out of cardboard triangles on a backing made from a strip of cloth. It has been decorated in six colours; orange, blue, and red in figure 1 correspond to 1, 2, and 3 in the diagram above. The opposite side, figure 2, is decorated with purple, gray, and yellow. Note the different patterns used for the colors on the two sides. Figure 3 shows the first fold, and figure 4 the result of the first nine folds, which form a spiral. Figures 5-6 show the final folding of the spiral to make a hexagon; in 5, two red faces have been hidden by a valley fold, and in 6, two red faces on the bottom side have been hidden by a mountain fold. After figure 6, the final loose triangle is folded over and attached to the other end of the original strip so that one side is all blue, and the other all orange.

Photos 7 and 8 show the process of everting the hexaflexagon to show the formerly hidden red triangles. By further manipulations, all six colors can be exposed. ]]

Once folded, faces 1, 2, and 3 are easier to find than faces 4, 5, and 6.

An easy way to expose all six faces is using the Tuckerman traverse, named after Bryant Tuckerman, one of the first to investigate the properties of hexaflexagons. The Tuckerman traverse involves the repeated flexing by pinching one corner and flex from exactly the same corner every time. If the corner refuses to open, move to an adjacent corner and keep flexing. This procedure brings you to a 12-face cycle. During this procedure, however, 1, 2, and 3 show up three times as frequently as 4, 5, and 6. The cycle proceeds as follows:

:1 → 3 → 6 → 1 → 3 → 2 → 4 → 3 → 2 → 1 → 5 → 2

And then back to 1 again.

Each color/face can also be exposed in more than one way. In figure 6, for example, each blue triangle has at the center its corner decorated with a wedge, but it is also possible, for example, to make the ones decorated with Y's come to the center. There are 18 such possible configurations for triangles with different colors, and they can be seen by flexing the hexahexaflexagon in all possible ways in theory, but only 15 can be flexed by the ordinary hexahexaflexagon. The 3 extra configurations are impossible due to the arrangement of the 4, 5, and 6 tiles at the back flap. (The 60-degree angles in the rhombi formed by the adjacent 4, 5, or 6 tiles will only appear on the sides and never will appear at the center because it would require one to cut the strip, which is topologically forbidden.)

Hexahexaflexagons can be constructed from different shaped nets of eighteen equilateral triangles. One hexahexaflexagon, constructed from an irregular paper strip, is almost identical to the one shown above, except that all 18 configurations can be flexed on this version.

==== Other hexaflexagons ====
While the most commonly seen hexaflexagons have either three or six faces, variations exist with any number of faces. Straight strips produce hexaflexagons with a multiple of three number of faces. Other numbers are obtained from nonstraight strips, that are just straight strips with some joints folded, eliminating some faces. Many strips can be folded in different ways, producing different hexaflexagons, with different folding maps.

=== Higher order flexagons ===
==== Right octaflexagon and right dodecaflexagon ====
In these more recently discovered flexagons, each square or equilateral triangular face of a conventional flexagon is further divided into two right triangles, permitting additional flexing modes.<ref>{{cite web |url=http://www.eighthsquare.com/12-gon.html |title=Flexagon Discovery: The Shape-Shifting 12-Gon |website=Eighthsquare.com |first=Ann |last=Schwartz |year=2005 |access-date=October 26, 2012}}</ref> The division of the square faces of tetraflexagons into right isosceles triangles yields the octaflexagons,<ref>{{cite web |url=http://loki3.com/flex/octa.html |title=Octaflexagon |website=Loki3.com |first=Scott |last=Sherman |year=2007 |access-date=October 26, 2012}}</ref> and the division of the triangular faces of the hexaflexagons into 30-60-90 right triangles yields the dodecaflexagons.<ref>{{cite web |url=http://loki3.com/flex/dodeca.html |title=Dodecaflexagon |website=Loki3.com |first=Scott |last=Sherman |year=2007 |access-date=October 26, 2012}}</ref>

==== Pentaflexagon and right decaflexagon ====
In its flat state, the pentaflexagon looks much like the [[Chrysler]] logo: a regular [[pentagon]] divided from the center into five [[isosceles triangle]]s, with angles 72–54–54. Because of its fivefold symmetry, the pentaflexagon cannot be folded in half. However, a complex series of flexes results in its transformation from displaying sides one and two on the front and back, to displaying its previously hidden sides three and four.<ref>{{cite web |url=http://loki3.com/flex/penta.html |title=Pentaflexagon |website=Loki3.com |first=Scott |last=Sherman |year=2007 |access-date=October 26, 2012}}</ref>

By further dividing the 72-54-54 triangles of the pentaflexagon into 36-54-90 right triangles produces one variation of the 10-sided decaflexagon.<ref>{{cite web |url=http://loki3.com/flex/deca.html |title=Decaflexagon |website=Loki3.com |first=Scott |last=Sherman |year=2007 |access-date=October 26, 2012}}</ref>

==== Generalized isosceles n-flexagon ====
The pentaflexagon is one of an infinite sequence of flexagons based on dividing a regular ''n''-gon into ''n'' isosceles triangles. Other flexagons include the heptaflexagon,<ref>{{cite web |url=http://loki3.com/flex/hepta.html |title=Heptaflexagon |website=Loki3.com |first=Scott |last=Sherman |year=2007 |access-date=October 26, 2012}}</ref> the isosceles octaflexagon,<ref>{{cite web |url=http://loki3.com/flex/octa.html#iso |title=Octaflexagon: Isosceles Octaflexagon |website=Loki3.com |first=Scott |last=Sherman |year=2007 |access-date=October 26, 2012}}</ref> the enneaflexagon,<ref>{{cite web |url=http://loki3.com/flex/ennea.html#iso |title=Enneaflexagon: Isosceles Enneaflexagon |website=Loki3.com |first=Scott |last=Sherman |year=2007 |access-date=October 26, 2012}}</ref> and others.

==== Nonplanar pentaflexagon and nonplanar heptaflexagon ====
[[Harold V. McIntosh]] also describes "nonplanar" flexagons (i.e., ones which cannot be flexed so they lie flat); ones folded from [[pentagon]]s called ''pentaflexagons'',<ref>{{cite web |url=http://delta.cs.cinvestav.mx/~mcintosh/comun/pentags/pentags.html |title=Pentagonal Flexagons |publisher=Universidad Autónoma de Puebla |website=Cinvestav.mx |first=Harold V. |last=McIntosh|author-link=Harold V. McIntosh |date=August 24, 2000 |access-date=October 26, 2012}}</ref> and from [[heptagon]]s called ''heptaflexagons''.<ref>{{cite web |url=http://delta.cs.cinvestav.mx/~mcintosh/comun/heptagon/heptagon.html |title=Heptagonal Flexagons |publisher=Universidad Autónoma de Puebla |website=Cinvestav.mx |first=Harold V. |last=McIntosh|author-link=Harold V. McIntosh |date=March 11, 2000 |access-date=October 26, 2012}}</ref> These should be distinguished from the "ordinary" pentaflexagons and heptaflexagons described above, which are made out of [[isosceles triangle]]s, and they ''can'' be made to lie flat.