Editing Operational amplifier (section)

=== Use in electronics system design ===
{{Unreferenced section|date=September 2024}}
The use of op amps as circuit blocks is much easier and clearer than specifying all their individual circuit elements (transistors, resistors, etc.), whether the amplifiers used are integrated or discrete circuits. In the first approximation op amps can be used as if they were ideal differential gain blocks; at a later stage, limits can be placed on the acceptable range of parameters for each op amp.

Circuit design follows the same lines for all [[electronic circuit]]s. A specification is drawn up governing what the circuit is required to do, with allowable limits. For example, the gain may be required to be 100 times, with a tolerance of 5% but drift of less than 1% in a specified temperature range; the input impedance not less than one [[megohm]]; etc.

A basic circuit is designed, often with the help of [[electronic circuit simulation]]. Specific commercially available op amps and other components are then chosen that meet the design criteria within the specified tolerances at acceptable cost. If not all criteria can be met, the specification may need to be modified.

A prototype is then built and tested; additional changes to meet or improve the specification, alter functionality, or reduce the cost, may be made.