Editing Engraving (section)

===Tools and gravers or burins===
[[Image:gravers.jpg|thumb|left|An assortment of hand engraving tools]]Gravers come in a variety of shapes and sizes that yield different line types. The burin produces a unique and recognizable quality of line that is characterized by its steady, deliberate appearance and clean edges. The angle tint tool has a slightly curved tip that is commonly used in printmaking. Florentine liners are flat-bottomed tools with multiple lines incised into them, used to do fill work on larger areas or to create uniform shade lines that are fast to execute. Ring gravers are made with particular shapes that are used by jewelry engravers in order to cut inscriptions inside rings. Flat gravers are used for fill work on letters, as well as "wriggle" cuts on most musical instrument engraving work, remove background, or create bright cuts. Knife gravers are for line engraving and very deep cuts. Round gravers, and flat gravers with a radius, are commonly used on silver to create bright cuts (also called bright-cut engraving), as well as other hard-to-cut metals such as nickel and steel. Square or V-point gravers are typically square or elongated diamond-shaped and used for cutting straight lines. V-point can be anywhere from 60 to 130 [[Degree (angle)|degrees]], depending on purpose and effect. These gravers have very small cutting points. Other tools such as [[mezzotint]] rockers, roulets and burnishers are used for texturing effects. Burnishing tools can also be used for certain stone setting techniques.[[File:2008-engraving.jpg|right|thumb|Stone engraving]]Musical instrument engraving on American-made brass instruments flourished in the 1920s and utilizes a specialized engraving technique where a flat graver is "walked" across the surface of the instrument to make zig-zag lines and patterns. The method for "walking" the graver may also be referred to as "wriggle" or "wiggle" cuts. This technique is necessary due to the thinness of metal used to make musical instruments versus firearms or jewelry. Wriggle cuts are commonly found on silver Western jewelry and other Western metal work.