Editing Disk storage (section)

==Rotation speed and track layout==
[[File:Comparison disk storage.svg|thumb|300px|Comparison of several forms of disk storage showing tracks (not-to-scale); green denotes start and red denotes end.<br /><nowiki>*</nowiki> Some CD-R(W) and DVD-R(W)/DVD+R(W) recorders operate in ZCLV, CAA or CAV modes.]]
Mechanically there are two different motions occurring inside the drive. One is the rotation of the disks inside the device. The other is the side-to-side motion of the head across the disk as it moves between tracks.

There are two types of disk rotation methods:
*[[constant linear velocity]] (used mainly in optical storage) varies the rotational speed of the optical disc depending upon the position of the head, and
*[[constant angular velocity]] (used in HDDs, standard FDDs, a few optical disc systems, and [[Gramophone record|vinyl audio records]]) spins the media at one constant speed regardless of where the head is positioned.

Track positioning also follows two different methods across disk storage devices. Storage devices focused on holding computer data, e.g., HDDs, FDDs, and Iomega [[zip drive]]s, use concentric tracks to store data. During a sequential read or write operation, after the drive accesses all the sectors in a track, it repositions the head(s) to the next track. This will cause a momentary delay in the flow of data between the device and the computer. In contrast, optical audio and video discs use a single [[spiral]] track that starts at the innermost point on the disc and flows continuously to the outer edge. When reading or writing data, there is no need to stop the flow of data to switch tracks. This is similar to vinyl records, except vinyl records started at the outer edge and spiraled in toward the center.