Editing Cathodoluminescence (section)

=== Optical cathodoluminescence microscope ===

[[Image:HC3-CL-microscope.gif|thumb|Hot cathode CL microscope]]

A '''cathodoluminescence''' ('''CL''') '''microscope''' combines a regular (light optical) [[microscope]] with a [[cathode-ray tube]]. It is designed to image the [[luminescence]] characteristics of polished thin sections of solids irradiated by an [[electron beam]].

Using a cathodoluminescence microscope, structures within [[crystal]]s or fabrics can be made visible which cannot be seen in normal light conditions. Thus, for example, valuable information on the growth of minerals can be obtained. CL-microscopy is used in [[geology]], [[mineralogy]] and [[materials science]] for the investigation of [[rock (geology)|rock]]s, [[mineral]]s, [[volcanic ash]], [[glass]], [[ceramic]], [[concrete]], [[fly ash]], etc.

CL color and intensity are dependent on the characteristics of the sample and on the working conditions of the [[electron gun]]. Here, [[acceleration voltage]] and beam current of the [[electron beam]] are of major importance. Today, two types of CL microscopes are in use. One is working with a "[[cold cathode]]" generating an electron beam by a [[corona discharge]] tube, the other one produces a beam using a "[[hot cathode]]". Cold-cathode CL microscopes are the simplest and most economical type. Unlike other electron bombardment techniques like [[electron microscopy]], cold cathodoluminescence microscopy provides positive ions along with the electrons which neutralize surface charge buildup and eliminate the need for conductive coatings to be applied to the specimens. The "hot cathode" type generates an electron beam by an electron gun with tungsten filament. The advantage of a hot cathode is the precisely controllable high beam intensity allowing to stimulate the emission of light even on weakly luminescing materials (e.g. [[quartz]] – see picture). To prevent charging of the sample, the surface must be coated with a conductive layer of [[gold]] or [[carbon]]. This is usually done by a [[sputter deposition]] device or a carbon coater.