Editing Relay (section)

=== Railway signaling ===
[[File:Relay room.jpg|thumb|Part of a relay [[interlocking]] using UK Q-style miniature plug-in relays]]

[[Railway signalling]] relays are large considering the mostly small voltages (less than 120&nbsp;V) and currents (perhaps 100&nbsp;mA) that they switch. Contacts are widely spaced to prevent flashovers and short circuits over a lifetime that may exceed fifty years.

Since rail signal circuits must be highly reliable, special techniques are used to detect and prevent failures in the relay system. To protect against false feeds, [[double switching]] relay contacts are often used on both the positive and negative side of a circuit, so that two false feeds are needed to cause a false signal. Not all relay circuits can be proved so there is reliance on construction features such as carbon to silver contacts to resist lightning induced contact welding and to provide AC immunity.

[[Opto-isolator]]s are also used in some instances with railway signalling, especially where only a single contact is to be switched.