Editing Radar (section)

===Speed measurement===
[[Speed]] is the change in distance to an object with respect to time. Thus the existing system for measuring distance, combined with a memory capacity to see where the target last was, is enough to measure speed. At one time the memory consisted of a user making [[grease pencil]] marks on the radar screen and then calculating the speed using a [[slide rule]]. Modern radar systems perform the equivalent operation faster and more accurately using computers.

If the transmitter's output is coherent (phase synchronized), there is another effect that can be used to make almost instant speed measurements (no memory is required), known as the [[Doppler effect]]. Most modern radar systems use this principle into [[Doppler radar]] and [[pulse-Doppler radar]] systems ([[weather radar]], military radar). The Doppler effect is only able to determine the relative speed of the target along the line of sight from the radar to the target. Any component of target velocity perpendicular to the line of sight cannot be determined by using the Doppler effect alone, but it can be determined by tracking the target's [[azimuth]] over time.

It is possible to make a Doppler radar without any pulsing, known as a [[continuous-wave radar]] (CW radar), by sending out a very pure signal of a known frequency. CW radar is ideal for determining the radial component of a target's velocity. CW radar is typically used by traffic enforcement to measure vehicle speed quickly and accurately where the range is not important.

When using a pulsed radar, the variation between the phase of successive returns gives the distance the target has moved between pulses, and thus its speed can be calculated.
Other mathematical developments in radar signal processing include [[time-frequency analysis]] (Weyl Heisenberg or [[wavelet]]), as well as the [[chirplet transform]] which makes use of the change of frequency of returns from moving targets ("chirp").