Editing Disc brake (section)

==Brake pads==
{{Main article|Brake pad}}
{{Unreferenced section|date=January 2016}}

Brake pads are designed for high [[friction]] with brake pad material embedded in the disc in the process of bedding while wearing evenly. Friction can be divided into two parts. They are: adhesive and abrasive.

Depending on the properties of the material of both the pad and the disc and the configuration and the usage, pad and disc wear rates will vary considerably. The properties that determine material wear involve trade-offs between performance and longevity.

The brake pads must usually be replaced regularly (depending on pad material and driving style), and some are equipped with a mechanism that alerts drivers that replacement is needed, such as a thin piece of soft metal that rubs against the disc when the pads are too thin causing the brakes to squeal, a soft metal tab embedded in the pad material that closes an electric circuit and lights a warning light when the brake pad gets thin, or an electronic [[sensor]].

Generally, road-going vehicles have two brake pads per caliper, while up to six are installed on each racing caliper, with varying frictional properties in a staggered pattern for optimum performance.

Early brake pads (and [[Brake lining|linings]]) contained [[asbestos]], producing dust that should not be inhaled. Although newer pads can be made of ceramics, [[Kevlar]], and other plastics, inhalation of brake dust should still be avoided regardless of material.