Editing Valve (section)

==Other considerations==
Valves are typically rated for maximum temperature and pressure by the manufacturer. The wetted materials in a valve are usually identified also. Some valves rated at very high pressures are available. When a designer, engineer, or user decides to use a valve for an application, he/she should ensure the rated maximum temperature and pressure are never exceeded and that the wetted materials are compatible with the fluid the valve interior is exposed to. In Europe, valve design and pressure ratings are subject to statutory regulation under the [[Pressure Equipment Directive]] 97/23/EC (PED).<ref>{{cite web|url=http://ec.europa.eu/enterprise/sectors/pressure-and-gas/documents/ped/|title=European Commission Pressure Equipment Directive (PED)|access-date=2010-09-13|archive-url=https://web.archive.org/web/20100815081132/http://ec.europa.eu/enterprise/sectors/pressure-and-gas/documents/ped/|archive-date=2010-08-15|url-status=dead|language=en}}</ref>

Some fluid system designs, especially in chemical or power plants, are schematically represented in piping and instrumentation diagrams. In such diagrams, different types of valves are represented by certain symbols.

Valves in good condition should be leak-free. However, valves may eventually wear out from use and develop a leak, either between the inside and outside of the valve or, when the valve is shut to stop flow, between the disc and the seat. A particle trapped between the seat and disc could also cause such leakage.