Editing Explosive (section)

===Density===
Density of loading refers to the mass of an explosive per unit volume. Several methods of loading are available, including pellet loading, cast loading, and press loading, the choice being determined by the characteristics of the explosive. Dependent upon the method employed, an average density of the loaded charge can be obtained that is within 80–99% of the theoretical maximum density of the explosive. High load density can reduce [[sensitivity (explosives)|sensitivity]] by making the [[mass]] more resistant to internal [[friction]]. However, if density is increased to the extent that individual [[crystal]]s are crushed, the explosive may become more sensitive. Increased load density also permits the use of more explosive, thereby increasing the power of the [[warhead]]. It is possible to compress an explosive beyond a point of sensitivity, known also as ''dead-pressing'', in which the material is no longer capable of being reliably initiated, if at all.{{citation needed|date=November 2023}}