Editing Squelch (section)

==Tone squelch and selective calling==
{{Main|Selective calling}}

Tone squelch, or another form of selective calling, is sometimes used to solve interference problems. Where more than one user is on the same channel (''co-channel'' users), selective calling addresses a subset of all receivers. Instead of turning on the receiver audio for any signal, the audio turns on only in the presence of the correct selective calling code. This is akin to the use of a lock on a door. A carrier squelch is unlocked and will let any signal in. Selective calling locks out all signals except ones with the correct key to the lock (the correct code).

In non-critical uses, selective calling can also be used to hide the presence of interfering signals such as receiver-produced intermodulation. Receivers with poor specifications—such as inexpensive police scanners or low-cost mobile radios—cannot reject the strong signals present in urban environments. The interference will still be present, and will still degrade system performance, but by using selective calling the user will not have to hear the noises produced by receiving the interference.

Four different techniques are commonly used. Selective calling can be regarded as a form of [[in-band signaling]].

===CTCSS===
{{Main|Continuous Tone-Coded Squelch System}}

'''CTCSS''' (Continuous Tone-Coded Squelch System) continuously superimposes any one of about 50 low-pitch audio [[pitch (music)|tone]]s on the transmitted signal, ranging from 67 to 254 [[Hertz|Hz]]. The original tone set was 10, then 32 tones, and has been expanded even further over the years. CTCSS is often called ''PL tone'' (for ''Private Line'', a [[trademark]] of [[Motorola]]), or simply ''tone squelch''. [[General Electric]]'s implementation of CTCSS is called ''Channel Guard'' (or ''CG''). [[RCA|RCA Corporation]] used the name ''Quiet Channel'', or ''QC''. There are many other company-specific names used by radio vendors to describe compatible options. Any CTCSS system that has compatible tones is interchangeable. Old and new radios with CTCSS and radios across manufacturers are compatible.{{cn|date=April 2023}} For those PMR446 radios with 38 codes, the codes 0 to 38 are CTCSS Tones:

{| class="wikitable"
| colspan="6" |'''PMR446 CTCSS Privacy Codes'''{{cn|date=April 2023}}
|-
|'''Number'''
|'''Tone Hz'''
|'''Number'''
|'''Tone Hz'''
|'''Number'''
|'''Tone Hz'''
|-
|'''0'''
|Off 
|'''13'''
|    103.5
|'''26'''
|   162.2
|-
|'''1'''
|      67.0
|'''14'''
|   107.2
|'''27'''
|   167.9
|-
|'''2'''
|      71.9
|'''15'''
|   110.9
|'''28'''
|   173.8
|-
|'''3'''
|      74.4
|'''16'''
|   114.8
|'''29'''
|   179.9
|-
|'''4'''
|      77.0
|'''17'''
|   118.8
|'''30'''
|   186.2
|-
|'''5'''
|      79.7
|'''18'''
|   123.0
|'''31'''
|   192.8
|-
|'''6'''
|      82.5
|'''19'''
|   127.3
|'''32'''
|   203.5
|-
|'''7'''
|      85.4
|'''20'''
|   131.8
|'''33'''
|   210.7
|-
|'''8'''
|      88.5
|'''21'''
|   136.5
|'''34'''
|   218.1
|-
|'''9'''
|      91.5
|'''22'''
|   141.3
|'''35'''
|   225.7
|-
|'''10'''
|      94.8
|'''23'''
|   146.2
|'''36'''
|   233.6
|-
|'''11'''
|      97.4
|'''24'''
|   151.4
|'''37'''
|   241.8
|-
|'''12'''
|    100.0
|'''25'''
|   156.7
|'''38'''
|   250.3
|}

===SelCall===
{{Main|Selcall}}

'''Selcall''' (Selective Calling) transmits a burst of up to five in-band audio tones at the beginning of each transmission. This feature (sometimes called "tone burst") is common in European systems. Early systems used one tone (commonly called "Tone Burst"). Several tones were used, the most common being 1,750&nbsp;Hz, which is still used in European amateur radio repeater systems. The addressing scheme provided by one tone was not enough, so a two-tone system was devised—one tone followed by a second tone (sometimes called a "1+1" system). Motorola later marketed a system called "Quik-Call" that used two simultaneous tones followed by two more simultaneous tones (sometimes called a "2+2" system) that was heavily used by fire department dispatch systems in the US. Later selective call systems used paging system technology that made use of a burst of five sequential tones.

===DCS===
<!-- "Digital-Coded Squelch" redirects here. -->
{| class="wikitable floatright"
|+ style="text-align: center;" | Standard DCS Codes
|-
! scope="col" | ''0nn'' !! scope="col" | ''1nn'' !! scope="col" | ''2nn'' !! scope="col" | ''3nn'' !! scope="col" | ''4nn'' !! scope="col" | ''5nn'' !! scope="col" | ''6nn'' !! scope="col" | ''7nn''
|-
| 023 || 114 || 205 || 306 || 411 || 503 || 606 || 703
|-
| 025 || 115 || 223 || 311 || 412 || 506 || 612 || 712
|-
| 026 || 116 || 226 || 315 || 413 || 516 || 624 || 723
|-
| 031 || 125 || 243 || 331 || 423 || 532 || 627 || 731
|-
| 032 || 131 || 244 || 343 || 431 || 546 || 631 || 732
|-
| 043 || 132 || 245 || 346 || 432 || 565 || 632 || 734
|-
| 047 || 134 || 251 || 351 || 445 ||     || 654 || 743
|-
| 051 || 143 || 261 || 364 || 464 ||     || 662 || 754
|-
| 054 || 152 || 263 || 365 || 465 ||     || 664 ||
|-
| 065 || 155 || 265 || 371 || 466 ||     ||     ||
|-
| 071 || 156 || 271 ||     ||     ||     ||     ||
|-
| 072 || 162 ||     ||     ||     ||     ||     ||
|-
| 073 || 165 ||     ||     ||     ||     ||     ||
|-
| 074 || 172 ||     ||     ||     ||     ||     ||
|-
|     || 174 ||     ||     ||     ||     ||     ||
|}

'''DCS''' (Digital-Coded Squelch), generically known as ''CDCSS'' (Continuous Digital-Coded Squelch System), was designed as the digital replacement for CTCSS. In the same way that a single CTCSS tone would be used on an entire group of radios, the same DCS code is used in a group of radios. DCS is also referred to as ''Digital Private Line'' (or ''DPL''), another trademark of Motorola, and likewise, General Electric's implementation of DCS is referred to as ''Digital Channel Guard'' (or ''DCG''). Despite the fact that it is not a tone, DCS is also called ''DTCS'' (Digital Tone Code Squelch) by [[Icom Incorporated|Icom]], and other names by other manufacturers. Radios with DCS options are generally compatible, provided the radio's encoder-decoder will use the same code as radios in the existing system.

DCS adds a 134.4&nbsp;[[bits per second|bit/s]] (sub-audible) bitstream to the transmitted audio. The code word is a 23-bit [[Binary Golay code|Golay]] (23,12) code which has the ability to detect and correct errors of 3 or fewer bits. The word consists of 12 data bits followed by 11 check bits. The last 3 data bits are a fixed '001', this leaves 9 code bits (512 possibilities) which are conventionally represented as a 3-digit [[octal]] number. Note that the first bit transmitted is the LSB, so the code is "backwards" from the transmitted bit order. Only 83 of the 512 possible codes are available, to prevent falsing due to alignment collisions.

DCS codes are standardized by the [[Telecommunications Industry Association]] with the following 83 codes being found in their most recent standard, however, some systems use non-standard codes.<ref>{{cite tech report |title=Land Mobile FM or PM – Communications Equipment – Measurement and Performance Standards, TIA-603-E |page=10 |institution=[[Telecommunications Industry Association]] |publication-date=March 2, 2016 }}</ref> For those PMR446 radios with 121 codes, the codes 39 to 121 are DCS codes:<ref>{{cite web |title=TLKR T8 Owner's Manual |url=https://www.motorolasolutions.com/content/dam/msi/docs/business/products/consumertwo-wayradios/mototlkr_t8/_documents/tlkr_t8_user_guide.pdf |publisher=[[Motorola Solutions]] |access-date=2023-01-23 |page=19 }}</ref>

{| class="wikitable"
|+ '''DCS'''
! '''Number'''
! '''DCS Code'''
! '''Number'''
! '''DCS Code'''
! '''Number'''
! '''DCS Code'''
|-
| '''39'''
| 023
| '''67'''
| 174
| '''95'''
| 445
|-
| '''40'''
| 025
| '''68'''
| 205
| '''96'''
| 464
|-
| '''41'''
| 026
| '''69'''
| 223
| '''97'''
| 465
|-
| '''42'''
| 031
| '''70'''
| 226
| '''98'''
| 466
|-
| '''43'''
| 032
| '''71'''
| 243
| '''99'''
| 503
|-
| '''44'''
| 043
| '''72'''
| 244
| '''100'''
| 506
|-
| '''45'''
| 047
| '''73'''
| 245
| '''101'''
| 516
|-
| '''46'''
| 051
| '''74'''
| 251
| '''102'''
| 532
|-
| '''47'''
| 054
| '''75'''
| 261
| '''103'''
| 546
|-
| '''48'''
| 065
| '''76'''
| 263
| '''104'''
| 565
|-
| '''49'''
| 071
| '''77'''
| 265
| '''105'''
| 606
|-
| '''50'''
| 072
| '''78'''
| 271
| '''106'''
| 612
|-
| '''51'''
| 073
| '''79'''
| 306
| '''107'''
| 624
|-
| '''52'''
| 074
| '''80'''
| 311
| '''108'''
| 627
|-
| '''53'''
| 114
| '''81'''
| 315
| '''109'''
| 631
|-
| '''54'''
| 115
| '''82'''
| 331
| '''110'''
| 632
|-
| '''55'''
| 116
| '''83'''
| 343
| '''111'''
| 654
|-
| '''56'''
| 125
| '''84'''
| 346
| '''112'''
| 662
|-
| '''57'''
| 131
| '''85'''
| 351
| '''113'''
| 664
|-
| '''58'''
| 132
| '''86'''
| 364
| '''114'''
| 703
|-
| '''59'''
| 134
| '''87'''
| 365
| '''115'''
| 712
|-
| '''60'''
| 143
| '''88'''
| 371
| '''116'''
| 723
|-
| '''61'''
| 152
| '''89'''
| 411
| '''117'''
| 731
|-
| '''62'''
| 155
| '''90'''
| 412
| '''118'''
| 732
|-
| '''63'''
| 156
| '''91'''
| 413
| '''119'''
| 734
|-
| '''64'''
| 162
| '''92'''
| 423
| '''120'''
| 743
|-
| '''65'''
| 165
| '''93'''
| 431
| '''121'''
| 754
|-
| '''66'''
| 172
| '''94'''
| 432
|
|
|}

===XTCSS===
'''XTCSS''' is the newest signalling technique, and provides 99 codes with the added advantage of "silent operation". XTCSS-fitted radios are purposed to enjoy more privacy and flexibility of operation. XTCSS is implemented as a combination of CTCSS and in-band signalling.