Editing Hockey puck (section)

==In ice hockey==
[[File:Pittsburgh Penguins, Washington Capitals, Bryan Rust (33744033514).jpg|thumb|upright=1.2|The puck (very center) is [[Shot (ice hockey)|shot]] towards the goal by [[Bryan Rust]] (far right)]]
[[Ice hockey]] requires a hard disk of vulcanized rubber. A standard ice hockey puck is black, {{convert|1|in|mm}} thick, {{convert|3|in|mm}} in diameter, and weighs between {{convert|5.5|and|6|oz|g|0}};<ref name="eNotes">Examples of distinct pucks at a vendor site: {{cite web |url= https://www.willies.co.uk/collections/ice-hockey-pucks-and-balls |title=Hockey Puck: How Products Are Made |publisher=Willies.co.uk |access-date=October 29, 2009 |url-status=dead |archive-url= https://web.archive.org/web/20110404043526/http://www.enotes.com/how-products-encyclopedia/hockey-puck |archive-date=April 4, 2011}}
</ref> some pucks are heavier or lighter than standard {{crossreference|(see [[#Variations|below]])}}. Pucks are often marked with [[Silkscreening|silkscreened]] team or league logos on one or both faces.<ref name="eNotes" /> Pucks are frozen before the game to reduce bouncing during play.<ref name="eNotes" />

===History===
====The first hockey pucks====
The first hockey pucks<ref>{{Cite web |date=2022-04-30 |title=What is a Hockey Puck made of? (Explained) {{!}} Histoky |url=https://histoky.com/what-is-a-hockey-puck-made-of/ |access-date=2022-05-10 |language=en |archive-date=May 24, 2022 |archive-url=https://web.archive.org/web/20220524092938/https://histoky.com/what-is-a-hockey-puck-made-of/ |url-status=dead }}</ref> were made from frozen cow dung and leather liver pads. These early pucks had a lifespan of about one game before they were too soft or too hard for playability, so they were replaced with wooden ones.

====Ball games on ice====
The sport of [[bandy]], prior to its first official organization in [[United Kingdom|Britain]], had its informal variants spread to North America where they and game concepts from [[lacrosse]], [[shinty]] and [[hurling]] served as precursors in some format to ice hockey. These informal games utilized various types of balls while being played on ice until the latter half of 19th century Canada, after which the game of ice hockey and the ice hockey puck began to take their official shape and form.

====Shape and material====
By the 1870s, flat pucks were made of wood as well as rubber. Records from the [[first indoor ice hockey game]] (1875) used a wooden puck, to prevent it from leaving the area of play<ref>{{cite book |title=Hockey: A People's History |last=McKinley |first=Michael |publisher=McClelland & Stewart |date=2006 |isbn=978-0-7710-5769-4 |location=Toronto |page=[https://archive.org/details/hockeypeopleshis0000mcki/page/9 9] |url-access=registration |url= https://archive.org/details/hockeypeopleshis0000mcki/page/9}}</ref> though new evidence has shown that cuts from large corks have also been used.{{citation needed|date=November 2021}}

At first, pucks (of either material) were made in the shape of a square. Rubber pucks were first made by slicing a rubber ball, then trimming the disk square. The original puck used first in the first organized games in Kingston on March 10, 1886 (on display at the [[Original Hockey Hall of Fame]]), was made from a cut-down lacrosse ball. It looks like a lump of coal, is made from soft rubber, and bounces far more than a modern hockey puck.<ref>{{Cite web |title=Historic Hockey: A History Lesson on Ice |url= http://www.originalhockeyhalloffame.com/news-events/historic.html |access-date=2023-02-22 |website=OriginalHockeyHallOfFame.com}}</ref>

The [[Montreal Victorias|Victoria Hockey Club]] of Montreal is credited with making and using the first round pucks, in the 1880s.<ref>{{cite news |work=The Gazette |location=Montreal |title=McGill Man Tells of How First Rules for Hockey Were Written |date=December 17, 1936 |page=17 |url= https://news.google.com/newspapers?id=0b0tAAAAIBAJ&dq=1883%20montreal%20winter%20carnival&pg=5799%2C2185856}}</ref>

===Variations===
There are several variations on the standard black, {{convert|6|oz|g|adj=on}} hockey puck. One of the most common is a blue, {{convert|4|oz|g|adj=on}} puck that is used for training younger players who are not yet able to use a standard puck. Heavier {{convert|10|oz|g|adj=on}} training pucks, typically reddish pink or reddish orange in colour, are also available for players looking to develop the strength of their shots or improve their stick handling skills. Players looking to increase wrist strength often practice with steel pucks that weigh {{convert|2|lb|g}}; these pucks are not used for shooting, as they could seriously harm other players. White pucks are used for technical handling and [[goaltender]] practice. These are regulation size and weight, but made from white rubber. The colour blend in with the ice and rink and requires higher focus on the puck, making handling of the black puck at later stage easier.<ref>{{Cite web |title=Advice – Different Types of Hockey Pucks |url= https://www.northernfreezehockey.com/advice-hockeypucks |access-date=2023-11-01 |website=NF Hockey |language=en}}</ref> A hollow, light-weight fluorescent orange puck is available for road or floor hockey. Other variants, some with plastic ball-bearings or glides, are available for use for road or roller hockey.{{Citation needed|date=October 2017}}

Two major developments have been devised to create better puck visibility on [[television]] broadcasts, but both were short-lived:

====Firepuck====
The use of a "Firepuck" in the early 1990s was the first attempt to improve the visibility of hockey pucks as seen on television. This invention incorporated coloured retro reflective materials of either [[embedded lens]] elements or prismatic reflectors laminated into recesses on the flat surfaces and the vertical edge of a standard hockey puck. Yellow was the preferred reflected colour. A spotlight was required to be positioned on the TV camera and focused at the centre of the viewing area.

A short demonstration tape of the [[Minnesota North Stars]] skating with the Firepuck was shown during the period break at the [[1993 NHL All-Star Game]] in Montreal. The [[International Hockey League (1945–2001)|International Hockey League]] (IHL) pursued testing the Firepuck with its inventor, Donald Klassen. The next television viewing was the IHL All-Star Game in [[Fort Wayne, Indiana]], January 1994, where the Firepuck was used for the entire game. The IHL tested the Firepuck in two more games, and finally the [[East Coast Hockey League]] used it January 17, 1997, for their all-star game.

The use of the Firepuck was discontinued because of these reasons:
* The slight structural change increased the tendency for the puck to bounce on the ice. This made it more difficult for the goaltender and resulted in increased scoring.
* The skaters objected to the use of camera spotlights which reflected off the ice.
* The television viewing contrast of the Firepuck was not noticeably enhanced when the camera view was of the entire rink, this being the most common camera shot.

The Firepuck name was branded during the 1990s but has since been discontinued.

====Smart puck====
{{See also|FoxTrax}}

The [[FoxTrax]] "smart puck" was developed by the [[Fox television network]] when it held [[National Hockey League]] (NHL) broadcasting rights for the United States. The puck had integrated electronics to track its position on screen; a blue streak traced the path of the puck across the ice. The streak would turn red if the puck was shot especially hard. This was an experiment in broadcasting intended to help viewers unfamiliar with hockey to better follow the game by making the puck more visible. It was ill-received by many traditional hockey fans, but appreciated by many of the more casual viewers.{{Citation needed|date=January 2010}} The system debuted with much publicity in the NHL All-Star game at the Boston [[FleetCenter (Boston)|Fleet Center]] on January 20, 1996, but the system was shelved when Fox Sports lost the NHL broadcast rights three years later.{{citation needed|date=October 2017}}

===Ballistics===
Most goals are scored by airborne pucks, sometimes seen to tumble through the air, on their way in to the net. 

Radar guns are commonly used to measure shot speed.
During a game, pucks can reach speeds of {{convert|100|mph|km/h}} or more when struck. The current world record is held by [[Denis Kulyash]] of [[KHL]]'s [[Avangard Omsk]], who slapped a puck at the 2011 KHL All-Star Game skills competition in [[St. Petersburg]], [[Russia]] on 5 February 2011 with a speed of {{convert|110.3|mph|km/h}}.<ref>{{cite web |url=https://www.guinnessworldrecords.com/world-records/fastest-ice-hockey-shot |title=Fastest ice hockey shot |last= |first= |date= |website= |publisher=[[Guinness World Records]]|access-date= |quote=}}</ref>
[[Zdeno Chára]], whose [[slapshot]] clocked {{convert|108.8|mph|km/h}} in the [[2013 NHL All-Star Game]] SuperSkills competition, broke his own earlier record.<ref>{{cite web |url=https://sports.yahoo.com/nhl/blog/puck_daddy/post/Video-Chara-breaks-own-Hardest-Shot-record-hit?urn=nhl-314198 |title=Chara breaks own Hardest Shot record, hits 105.9 mph |publisher=Yahoo! Sports Puck Daddy |access-date=March 4, 2011 |date=January 29, 2011 |archive-date=October 13, 2017 |archive-url=https://web.archive.org/web/20171013120756/https://sports.yahoo.com/nhl/blog/puck_daddy/post/Video-Chara-breaks-own-Hardest-Shot-record-hit?urn=nhl-314198 |url-status=dead }}</ref>

===In game play===
Fast-flying pucks are potentially dangerous to players and spectators. Puck-related injuries at hockey games are not uncommon. This led to the evolution of various types of protective gear for players, most notably the [[goaltender mask]]. The most notable incident involving a spectator took place on March 18, 2002, when a 13-year-old girl, [[Brittanie Cecil]], died two days after being struck on the head by a hockey puck deflected into the crowd at an NHL game between the [[Calgary Flames]] and [[Columbus Blue Jackets]] in [[Columbus, Ohio|Columbus]]. This is the only known incident of this type to have occurred in the history of the league. Partly as a result of this event, the glass or [[plexiglass]] panels that sit atop the boards of hockey rinks to protect spectators have been supplemented with mesh nets that extend above the upper edge of the glass.

===Manufacture===
NHL regulation pucks were not ''required'' for professional play until the 1990–91 season, but were standardized for consistent play and ease of manufacture half a century earlier, by [[Art Ross]], in 1940.<ref name="eNotes" /> Major manufacturers of pucks exist in Canada, Russia, the [[Czech Republic]], the [[People's Republic of China]],<ref name="eNotes" />{{Better source needed|date=February 2014}} and [[Slovakia]].<ref>{{cite magazine |last=Vestenice |first=Dolne |url= http://www.slovakheritage.org/Misc/pucksvegum.htm |title=Hockey Pucks from Vegum |magazine=Slovak Heritage Live |volume=6 |issue=3 |date=Fall 1998}}</ref>

The black rubber of the puck is made up of a mix of natural rubber, antioxidants, bonding materials and other chemicals to achieve a balance of [[hardness]] and [[tensile strength|resilience]].<ref name="QNHL.com video">{{cite web |url= http://sciencehack.com/videos/view/0xFbO4sQjPw |title=How it's made: Hockey Pucks |publisher=ScienceHack |access-date=October 29, 2009 |archive-url= https://web.archive.org/web/20120908025016/http://sciencehack.com/videos/view/0xFbO4sQjPw |archive-date=September 8, 2012 |url-status=dead}}</ref> This mixture is then turned in a machine with metal rollers, where workers add extra natural rubber, and ensure that the mixing is even. Samples are then put into a machine that analyses if the rubber will harden at the right temperature. An automated apparatus, called a [[pultrusion]] machine,<ref name="eNotes" /> extrudes the rubber into long circular logs that are {{convert|3|in|cm}} in diameter and then cut into {{convert|1|in|cm}} thick pieces while still soft. These pre-forms are then manually put into moulds that are the exact size of a finished puck.<ref name="QNHL.com video" /> There are up to 200 mould cavities per moulding palette, capable of producing up to 5,000 pucks per week.<ref name="eNotes" /> The moulds are then compressed. This compression may be done cold<ref name="eNotes" /> or with the moulds heated to {{convert|300|°F|°C|abbr=on}} for 18 minutes,<ref name="QNHL.com video" /> depending on the proprietary methods of the manufacturer. They come out hard and then are allowed to sit for 24 hours. Each puck is manually cleaned with a trimmer machine to remove excess rubber. The moulding process adds a diamond cross-hatch texture around the edge of the puck for improved friction between the stick and puck for better control and puck handling.<ref name="QNHL.com video" />

The practice pucks are made by a similar but faster process that uses larger pre-forms, {{convert|4|–|5|in|cm|abbr=on}} thick, puts them into moulds automatically, and applies more pressure and heat over a shorter period of time to compress the puck into the standard size. This allows approximately twice as many pucks to be manufactured in the same time period as the more exacting production of NHL regulation pucks. People sometimes freeze pucks to prevent them from sticking to the ice.<ref name="eNotes" />

The list of former or present-day major producers includes
* {{flagicon|CAN}} Viceroy
* {{flagicon|CAN}} [[Inglasco]] - [[Olympics 2010]].
* {{flagicon|CAN}} [[Pro-Flex]]
* {{flagicon|CZE}} [[Gufex]]<ref name="pukyCR">{{cite web |url= http://hradec.idnes.cz/olympijske-goly-v-soci-obstaraji-puky-z-nachoda-f55-/hradec-zpravy.aspx?c=A140107_2018928_hradec-zpravy_pos |title=Olympijské góly v Soči obstarají puky z Náchoda. Překvapený je i výrobce |language=cs |work=Hradec.Idnes.cz |date=January 7, 2014}}</ref> - [[1998 Winter Olympics|Olympics 1998]], [[2002 Winter Olympics|2002]], [[2006 Winter Olympics|2006]] and [[2018 Winter Olympics|2018]]. Since 1999, all [[Ice Hockey World Championships|World Championships]].
* {{flagicon|CZE}} Rubena<ref name="pukyCR" /> - [[Olympics 2014]].
* {{flagicon|SVK}} [[Vegum]] Dolné Vestenice<ref>{{cite web |url= http://www.hockeyslovakia.sk/sk/clanok/na-ms-sa-bude-hrat-s-ceskymi-pukmi-slovenske-v-nhl |title=Na MS sa bude hrať s českými pukmi, slovenské v NHL |work=HockeySlovakia.sk |language=sk}}</ref>
* {{flagicon|USA}} [[Converse (shoe company)|Converse]]
* {{flagicon|USA}} HockeyShot
* {{flagicon|USA}} [[Spalding (sports equipment)|Spalding]]
* {{flagicon|China}} Xiamen Yin Hua Silicone Rubber Products Co., Ltd.
* {{flagicon|China}} Xiamen Deng Hong Silica Gel Product Co., Ltd.
* {{flagicon|China}} Xiamen Ijetech Industry & Trade Co. Ltd