Editing Multimeter (section)

=== Burden voltage ===
Every inline series-connected ammeter, including a multimeter in a current range, has a certain resistance. Most multimeters inherently measure voltage, and pass a current to be measured through a [[shunt resistance]], measuring the voltage developed across it. The voltage drop is known as the burden voltage, specified in volts per ampere. The value can change depending on the range the meter sets, since different ranges usually use different shunt resistors.<ref>{{cite web |url=http://us.fluke.com/fluke/usen/community/fluke+plus/articlecategories/electrical/burdenvoltage.htm |title=Explanation of burden voltage by multimeter manufacturer Fluke |publisher=[[Fluke Corporation|Fluke]] |access-date=2010-11-02}}</ref> The burden voltage can be significant in very low-voltage circuit areas. To check for its effect on accuracy and on external circuit operation the meter can be switched to different ranges; the current reading should be the same and circuit operation should not be affected if burden voltage is not a problem. If this voltage is significant it can be reduced (also reducing the inherent accuracy and precision of the measurement) by using a higher current range.