Editing Corrosion (section)

==== Anodization ====
{{Main|Anodizing}}
[[File:Belaying8.jpg|thumb|This [[Belay device|climbing descender]] is anodized with a yellow finish.]]
[[Aluminium alloy]]s often undergo a surface treatment. Electrochemical conditions in the bath are carefully adjusted so that uniform pores, several [[nanometer]]s wide, appear in the metal's oxide film. These pores allow the oxide to grow much thicker than passivating conditions would allow. At the end of the treatment, the pores are allowed to seal, forming a harder-than-usual surface layer. If this coating is scratched, normal passivation processes take over to protect the damaged area.

Anodizing is very resilient to weathering and corrosion, so it is commonly used for building facades and other areas where the surface will come into regular contact with the elements. While being resilient, it must be cleaned frequently. If left without cleaning, [[panel edge staining]] will naturally occur. Anodization is the process of converting an anode into cathode by bringing a more active anode in contact with it.