Editing Valve (section)

===Two-port valves===
Operating positions for 2-port valves can be either shut (closed) so that no flow at all goes through, fully open for maximum flow, or sometimes partially open to any degree in between. Many valves are not designed to precisely control intermediate degree of flow; such valves are considered to be either open or shut. Some valves are specially designed to regulate varying amounts of flow. Such valves have been called by various names such as ''regulating'', ''throttling'', ''metering'', or ''[[needle valve]]s''. For example, needle valves have elongated conically tapered discs and matching seats for fine flow control. For some valves, there may be a mechanism to indicate by how much the valve is open, but in many cases other indications of flow rate are used, such as separate [[flow meter]]s.

In plants with remote-controlled process operation, such as oil refineries and petrochemical plants, some 2-way valves can be designated as normally closed (NC) or normally open (NO) during regular operation. Examples of normally-closed valves are ''[[sampling valve]]s'', which are only opened while a sample is taken. Other examples of normally-closed valves are [[Shutdown valve|emergency shutdown valves]], which are kept open when the system is in operation and will automatically shut by taking away the power supply. This happens when there is a problem with a unit or a section of a fluid system such as a leak in order to isolate the problem from the rest of the system. Examples of normally-open valves are purge-gas supply valves or emergency-relief valves. When there is a problem these valves open (by switching them 'off') causing the unit to be flushed and emptied.

Although many 2-way valves are made in which the flow can go in either direction between the two ports, when a valve is placed into a certain application, flow is often expected to go from one certain port on the '''upstream''' side of the valve, to the other port on the '''downstream''' side. [[Pressure regulator]]s are variations of valves in which flow is controlled to produce a certain downstream pressure, if possible. They are often used to control flow of gas from a [[gas cylinder]]. A back-pressure regulator is a variation of a valve in which flow is controlled to maintain a certain upstream pressure, if possible.