Editing Tablet (pharmacy) (section)

===Tablet coating===
{{See also|Film coating}}

Many tablets today are coated after being pressed. Although sugar-coating was popular in the past, the process has many drawbacks. Modern tablet coatings<ref>Gendre C., Genty M., César da Silva J., Tfayli A., Boiret M., Lecoq O., Baron M., Chaminade P., Péan J-M., Comprehensive study of dynamic curing effect on tablet coating structure, Eur. J. Pharm. Biopharm., 81 (2012), 657-665</ref> are [[polymer]] and [[polysaccharide]] based, with [[plasticizer]]s and [[pigment]]s included. Tablet coatings must be stable and strong enough to survive the handling of the tablet, must not make tablets stick together during the coating process, and must follow the fine contours of embossed characters or logos on tablets. Coatings are necessary for tablets that have an unpleasant taste, and a smoother finish makes large tablets easier to swallow. Tablet coatings are also useful to extend the shelf-life of components that are sensitive to moisture or oxidation. Special coatings (for example with pearlescent effects) can enhance brand recognition.

If the active ingredient of a tablet is sensitive to acid, or is irritant to the stomach lining, an [[enteric coating]] can be used, which is resistant to [[stomach]] acid, and dissolves in the less acidic area of the intestines. Enteric coatings are also used for medicines that can be negatively affected by taking a long time to reach the [[small intestine]], where they are absorbed. Coatings are often chosen to [[controlled release|control the rate of dissolution]] of the drug in the gastrointestinal tract. Some drugs are absorbed better in certain parts of the digestive system. If this part is the stomach, a coating is selected that dissolves quickly and easily in acid. If the rate of absorption is best in the large intestine or colon, a coating is used that is acid resistant and dissolves slowly to ensure that the tablet reaches that point before dispersing. To measure the disintegration time of the tablet coating and the tablet core, automatic disintegration testers are used which are able to determine the complete disintegration process of a tablet by measuring the rest height of the thickness with every upward stroke of the disintegration tester basket.

There are two types of coating machines used in the pharmaceutical industry: coating pans and automatic coaters.<ref>[http://apteka95.com.ua/en/directions/1806/ Coating machines] {{webarchive|url=https://web.archive.org/web/20120328095614/http://apteka95.com.ua/en/directions/1806/ |date=2012-03-28 }}, apteka95.com</ref> Coating pans are used mostly to sugar coat pellets. Automatic coaters are used for all kinds of coatings; they can be equipped with a remote control panel, a dehumidifier, and dust collectors. An explosion-proof design is required for applying coatings that contain alcohol.