Editing Dairy (section)

===Milking machines===
{{main|Automatic milking}}
[[File:Melkgeschirr.jpg|thumb|The milking machine extracts milk from all teats.]]

Milking machines are used to harvest milk from cows when manual milking becomes inefficient or labour-intensive.  One early model was patented in 1907.<ref>{{cite book|author=Hearst Magazines|title=Popular Mechanics|url=https://books.google.com/books?id=ud8DAAAAMBAJ&pg=PA868|date=August 1907|publisher=Hearst Magazines|page=868}}</ref> The milking unit is the portion of a milking machine for removing milk from an udder.  It is made up of a claw, four teatcups, (Shells and rubber liners) long milk tube, long pulsation tube, and a pulsator.  The claw is an assembly that connects the short pulse tubes and short milk tubes from the teatcups to the long pulse tube and long milk tube. (Cluster assembly) Claws are commonly made of stainless steel or plastic or both. Teatcups are composed of a rigid outer shell (stainless steel or plastic) that holds a soft inner liner or ''inflation''.  Transparent sections in the shell may allow viewing of liner collapse and milk flow.  The annular space between the shell and liner is called the pulse chamber.

Milking machines work in a way that is different from hand milking or calf suckling. Continuous vacuum is applied inside the soft liner to massage milk from the teat by creating a pressure difference across the teat canal (or opening at the end of the teat). Vacuum also helps keep the machine attached to the cow.  The vacuum applied to the teat causes congestion of teat tissues (accumulation of blood and other fluids). Atmospheric air is admitted into the pulsation chamber about once per second (the pulsation rate) to allow the liner to collapse around the end of teat and relieve congestion in the teat tissue. The ratio of the time that the liner is open (milking phase) and closed (rest phase) is called the pulsation ratio.

The four streams of milk from the teatcups are usually combined in the claw and transported to the milkline, or the collection bucket (usually sized to the output of one cow) in a single milk hose.  Milk is then transported (manually in buckets) or with a combination of airflow and mechanical [[pump]] to a central storage [[Storage tank|vat]] or [[bulk tank]].  Milk is refrigerated on the farm in most countries either by passing through a [[heat-exchanger]] or in the bulk tank, or both.

The photo to the right shows a bucket milking system with the stainless steel bucket visible on the far side of the cow.  The two rigid stainless steel teatcup shells applied to the front two quarters of the udder are visible.  The top of the flexible liner is visible at the top of the shells as are the short milk tubes and short pulsation tubes extending from the bottom of the shells to the claw.  The bottom of the claw is transparent to allow observation of milk flow.  When milking is completed the vacuum to the milking unit is shut off and the teatcups are removed.

Milking machines keep the milk enclosed and safe from external contamination. The interior 'milk contact' surfaces of the machine are kept clean by a manual or automated washing procedures implemented after milking is completed.  Milk contact surfaces must comply with regulations requiring food-grade materials (typically [[stainless steel]] and special plastics and rubber compounds) and are easily cleaned.

Most milking machines are powered by [[Electrical power industry|electricity]] but, in case of electrical failure, there can be an alternative means of motive power, often an [[internal combustion engine]], for the vacuum and milk pumps.{{cn|date=February 2025}}