Editing Metal casting (section)

=== Centrifugal casting ===
{{Main article|Centrifugal casting (silversmithing)}}In this process molten metal is poured in the mold and allowed to solidify while the mold is rotating. Metal is poured into the center of the mold at its axis of rotation. Due to inertial force, the liquid metal is thrown out toward the periphery.

Centrifugal casting is both gravity and pressure independent since it creates its own force feed using a temporary sand mold held in a spinning chamber. Lead time varies with the application. Semi- and true-centrifugal processing permit 30–50 pieces/hr-mold to be produced, with a practical limit for batch processing of approximately 9000&nbsp;kg total mass with a typical per-item limit of 2.3–4.5&nbsp;kg.

Industrially, the centrifugal casting<ref>{{cite web |title=Centrifugal casting |url=https://eminentengitech.com/services/casting-manufacturer/ |website=Eminent Engitech |access-date=2022-05-09 |archive-date=2022-10-04 |archive-url=https://web.archive.org/web/20221004121735/https://eminentengitech.com/services/casting-manufacturer/ |url-status=live }}</ref> of railway wheels was an early application of the method developed by the [[Germany|German]] industrial company [[Krupp]] and this capability enabled the rapid growth of the enterprise.

Small art pieces such as jewelry are often cast by this method using the lost wax process, as the forces enable the rather viscous liquid metals to flow through very small passages and into fine details such as leaves and petals. This effect is similar to the benefits from vacuum casting, also applied to jewelry casting.