Editing Speed skating (section)

==Equipment==

'''Speed skates''' Speed skates differ greatly from hockey skates and figure skates. Unlike hockey skates and figure skates, speed skates cut off at the ankle and are built more like a shoe than a boot to allow for more ankle compression. The blades range in length from 30 to 45&nbsp;cm depending on the age and height of the skater. Short track blades are fixed to the boot in at the heel and immediately behind the ball of the foot. Long track skates, also called clap skates, attach to a hinge at the front of the boot. The heel of the boot detaches from the blade on every stroke, through a spring mechanism located at the front connector. This extends the skater's stroke by keeping the blade on the ice longer. Speed skates are manually sharpened using a jig to hold them in place.<ref>{{Cite web|title = longtrack|url = http://www.socalspeedskating.org/equip/skates/longtrack/longtrack.htm|website = socalspeedskating.org|access-date = 2 November 2015|archive-date = 27 December 2018|archive-url = https://web.archive.org/web/20181227214039/http://www.socalspeedskating.org/equip/skates/longtrack/longtrack.htm|url-status = dead}}</ref>

'''Short track'''
All short track skaters must have speed skates, a [[spandex]] skin suit, protective helmet, specific cut proof skating gloves, knee pads and shin pads (in suit), neck guard (bib style) and ankle protection. Protective eyewear is mandatory. Many skaters wear smooth ceramic or carbon fiber tips on the left hand glove to reduce friction when their hand is on the ice at corners. All skaters who race at a national level must wear a cutproof [[kevlar]] suit to protect against being cut from another skater's blade.

'''Long track'''
For long track skaters the same equipment should be worn as short track racers but with the exception of a helmet, shin pads, knee pads, and neck guard which are not required; along with their blades. Long track skaters skate on what are called "clap blades". These blades have hinges under the boot towards the back. It is described in more detail above. Protective eyewear is not mandatory. The suit also does not need to be kevlar. Long track skaters wear a hood that is built into the suit.

'''Skate Sharpening'''
To sharpen their skates, skaters must place their skates on a jig and move diamond or stone stones back and forth. The diamond stones will have different colors that will be assigned to them depending on how much they eat into the blade, black as the one that affects the blades the most and gold as the one that affects the least.