Editing Lime kiln (section)

====Counter-current shaft kilns====
The fuel is injected part-way up the shaft, producing maximum temperature at this point. The fresh feed fed in at the top is first dried then heated to 800&nbsp;°C, where de-carbonation begins, and proceeds progressively faster as the temperature rises. Below the burner, the hot lime transfers heat to, and is cooled by, the combustion air. A mechanical grate withdraws the lime at the bottom. A [[Fan (mechanical)|fan]] draws the gases through the kiln, and the level in the kiln is kept constant by adding feed through an airlock. As with batch kilns, only large, graded stone can be used, in order to ensure uniform gas-flows through the charge. The degree of burning can be adjusted by changing the rate of withdrawal of lime. Heat consumption as low as 4 MJ/kg is possible, but 4.5 to 5 MJ/kg is more typical. Due to temperature peak at the burners up to 1200&nbsp;°C in a shaft kiln conditions are ideal to produce medium and hard burned lime.

[[File:LDLimeShaftKilnRegen.jpg|thumb|200px|right|Gas flows in two cycles of operation of regenerative shaft kilns]]