Editing Cold fusion (section)

===Excess heat and energy production===
An excess heat observation is based on an [[First law of thermodynamics|energy balance]]. Various sources of energy input and output are continuously measured. Under normal conditions, the energy input can be matched to the energy output to within experimental error. In experiments such as those run by Fleischmann and Pons, an electrolysis cell operating steadily at one temperature transitions to operating at a higher temperature with no increase in applied current.{{sfn|ps=|Fleischmann|Pons|Anderson|Li|1990}} If the higher temperatures were real, and not an experimental artifact, the energy balance would show an unaccounted term. In the Fleischmann and Pons experiments, the rate of inferred excess heat generation was in the range of 10–20% of total input, though this could not be reliably replicated by most researchers.{{sfn|ps=|US DOE|2004|p=3}} Researcher [[Nathan Lewis (chemist)|Nathan Lewis]] discovered that the excess heat in Fleischmann and Pons's original paper was not measured, but estimated from measurements that didn't have any excess heat.{{sfn|ps=|Taubes|1993|pp=256–259}}

Unable to produce excess heat or neutrons, and with positive experiments being plagued by errors and giving disparate results, most researchers declared that heat production was not a real effect and ceased working on the experiments.<ref>{{harvnb|Huizenga|1993|pp=x, 22–40, 70–72, 75–78, 97, 222–223}}, {{harvnb|Close|1992|pp=211–214, 230–232, 254–271}}, {{harvnb|Taubes|1993|pp=264–266, 270–271}} {{harvnb|Choi|2005}}</ref> In 1993, after their original report, Fleischmann reported "heat-after-death" experiments—where excess heat was measured after the electric current supplied to the electrolytic cell was turned off.{{sfn|ps=|Fleischmann|Pons|1993}} This type of report has also become part of subsequent cold fusion claims.<ref>{{harvnb|Mengoli|Bernardini|Manduchi|Zannoni|1998}}, {{harvnb|Szpak|Mosier-Boss|Miles|Fleischmann|2004}}</ref>