Editing Binary-coded decimal (section)

==BCD in electronics==
{{Multiple issues|section=true|{{More citations needed section|date=January 2018}}{{Primary sources|section|date=January 2018}}}}

BCD is common in electronic systems where a numeric value is to be displayed, especially in systems consisting solely of digital logic, and not containing a microprocessor. By employing BCD, the manipulation of numerical data for display can be greatly simplified by treating each digit as a separate single sub-circuit.

This matches much more closely the physical reality of display hardware—a designer might choose to use a series of separate identical [[seven-segment display]]s to build a metering circuit, for example. If the numeric quantity were stored and manipulated as pure binary, interfacing with such a display would require complex circuitry. Therefore, in cases where the calculations are relatively simple, working throughout with BCD can lead to an overall simpler system than converting to and from binary. Most pocket calculators do all their calculations in BCD.

The same argument applies when hardware of this type uses an embedded microcontroller or other small processor. Often, representing numbers internally in BCD format results in smaller code, since a conversion from or to binary representation can be expensive on such limited processors. For these applications, some small processors feature dedicated arithmetic modes, which assist when writing routines that manipulate BCD quantities.<ref name="IEEE_CORDIC"/><ref name="BCS_CORDIC"/>