Editing Hayes AT command set (section)

== V.250 ==
The [[ITU-T]] established a standard in its [[ITU-T V-Series Recommendations|V-Series Recommendations]], ''V.25 ter'', in 1995 in an attempt to establish a standard for the command set again. It was renamed ''V.250'' in 1998 with an annex that was not concerning the Hayes command set renamed as ''V.251''. A V.250 compliant modem implements the A, D, E, H, I, L, M, N, O, P, Q, T, V, X, Z, &C, &D, and &F commands in the way specified by the standard. It must also implement S registers and must use registers S0, S3, S4, S5, S6, S7, S8, and S10 for the purposes given in the standard. It also must implement any command beginning with the plus sign, "+" followed by any letter A to Z, only in accordance with ITU recommendations. Modem manufacturers are free to implement other commands and S-registers as they see fit, and may add options to standard commands.

{| class="wikitable"
|+ V.250 – Defined leading character sequences
! Leading<br />characters
! Includes commands related to
|-
| +A || Call control (network Addressing) issues, common, PSTN, ISDN, ITU-T Rec. X.25, switched digital
|-
| +C || Digital Cellular extensions
|-
| +D || Data Compression, ITU-T Rec. V.42 bis
|-
| +E || Error Control, ITU-T Rec. V.42
|-
| +F || Facsimile, ITU-T Rec. T.30, etc.
|-
| +G || Generic issues such as identity and capabilities
|-
| +I || DTE-DCE Interface issues, ITU-T Rec. V.24, etc.
|-
| +M || Modulation, ITU-T Rec. V.32 bis, etc.
|-
| +P || PCM DCE commands, ITU-T Rec. V.92
|-
| +S || Switched or Simultaneous Data Types
|-
| +T || Test issues
|-
| +V || Voice extensions
|-
| +W || Wireless extensions
|}