Editing Cello (section)

===Neck, fingerboard, pegbox, and scroll===
Above the main body is the carved neck. The neck has a curved cross-section on its underside, which is where the player's thumb runs along the neck during playing. The neck leads to a [[pegbox]] and the [[scroll (music)|scroll]], which are all normally carved out of a single piece of wood, usually [[maple]]. The [[fingerboard]] is glued to the neck and extends over the body of the instrument. The fingerboard is given a curved shape, matching the curve on the bridge. Both the fingerboard and bridge need to be curved so that the performer can bow individual strings. If the cello were to have a flat fingerboard and bridge, as with a typical guitar, the performer would only be able to bow the leftmost and rightmost two strings or bow all the strings. The performer would not be able to play the inner two strings alone.

The [[Nut (instrumental)|nut]] is a raised piece of wood, fitted where the fingerboard meets the pegbox, in which the strings rest in shallow slots or grooves to keep them the correct distance apart. The pegbox houses four tapered [[tuning peg]]s, one for each string. The pegs are used to tune the cello by either tightening or loosening the string. The pegs are called "friction pegs", because they maintain their position by friction. The scroll is a traditional ornamental part of the cello and a feature of all other members of the [[violin family]]. [[Ebony]] is usually used for the tuning pegs, fingerboard, and nut, but other hardwoods, such as [[Buxus|boxwood]] or [[rosewood]], can be used. Black fittings on low-cost instruments are often made from inexpensive wood that has been blackened or "ebonized" to look like [[ebony]], which is much harder and more expensive. Ebonized parts such as tuning pegs may crack or split, and the black surface of the fingerboard will eventually wear down to reveal the lighter wood underneath.