Editing Welding (section)

==Geometry==<!-- "Butt joint (welding)" redirects here -->
{{Main|Welding joint}}
[[Image:Common joint types.svg|left|thumb|Common welding joint types:{{image key|list type=ordered|Square butt joint|V butt joint|Lap joint|T-joint}}]]

Welds can be geometrically prepared in many different ways. The five basic types of weld joints are the butt joint, lap joint, corner joint, edge joint, and T-joint (a variant of this last is the [[cruciform joint]]). Other variations exist as well—for example, double-V preparation joints are characterized by the two pieces of material each tapering to a single center point at one-half their height. Single-U and double-U preparation joints are also fairly common—instead of having straight edges like the single-V and double-V preparation joints, they are curved, forming the shape of a U. Lap joints are also commonly more than two pieces thick—depending on the process used and the thickness of the material, many pieces can be welded together in a lap joint geometry.<ref>{{Cite book
 | last = Hicks
 | first = John
 | year = 1999
 | title = Welded Joint Design
 | url = https://archive.org/details/weldedjointdesig00hick
 | url-access = limited
 | location = [[New York City|New York]]
 | publisher = Industrial Press
 | isbn = 0-8311-3130-6 | pages=[https://archive.org/details/weldedjointdesig00hick/page/n63 52]–55
}}</ref>

Many welding processes require the use of a particular joint design; for example, resistance spot welding, laser beam welding, and electron beam welding are most frequently performed on lap joints. Other welding methods, like shielded metal arc welding, are extremely versatile and can weld virtually any type of joint. Some processes can also be used to make multipass welds, in which one weld is allowed to cool, and then another weld is performed on top of it. This allows for the welding of thick sections arranged in a single-V preparation joint, for example.<ref>{{harvnb|Cary|Helzer|2005|pp=19, 103, 206}}</ref>

[[Image:Welded butt joint x-section.svg|thumb|The cross-section of a welded butt joint, with the darkest gray representing the weld or fusion zone, the medium gray the heat-affected zone, and the lightest gray the base material.]]
After welding, a number of distinct regions can be identified in the weld area. The weld itself is called the fusion zone—more specifically, it is where the filler metal was laid during the welding process. The properties of the fusion zone depend primarily on the filler metal used, and its compatibility with the base materials. It is surrounded by the [[heat-affected zone]], the area that had its microstructure and properties altered by the weld. These properties depend on the base material's behavior when subjected to heat. The metal in this area is often weaker than both the base material and the fusion zone, and is also where residual stresses are found.<ref>{{harvnb|Cary|Helzer|2005|pp=401–404}}</ref>