Editing Masonry (section)

==Concrete block==
[[Image:CMUs.jpg|thumb|Concrete masonry units (CMUs) or blocks in a basement wall before burial]]
Blocks of cinder concrete (''[[Concrete masonry unit|cinder blocks]]'' or ''breezeblocks''), ordinary concrete (''[[Concrete masonry unit|concrete blocks]]''), or hollow tile are generically known as Concrete Masonry Units (CMUs). They usually are much larger than ordinary bricks and so are much faster to lay for a wall of a given size. Furthermore, cinder and concrete blocks typically have much lower [[water]] absorption rates than brick. They often are used as the structural core for veneered brick masonry or are used alone for the walls of factories, garages, and other [[Industrial Style|industrial-style]] buildings where such appearance is acceptable or desirable. Such blocks often receive a [[stucco]] surface for decoration. Surface-bonding [[cement]], which contains synthetic fibers for reinforcement, is sometimes used in this application and can impart extra strength to a block wall. Surface-bonding cement is often pre-colored and can be stained or painted thus resulting in a finished stucco-like surface.

The primary structural advantage of concrete blocks in comparison to smaller clay-based bricks is that a CMU wall can be reinforced by filling the block voids with [[concrete]] with or without steel [[rebar]]. Generally, certain voids are designated for filling and reinforcement, particularly at corners, wall-ends, and openings while other voids are left empty.  This increases wall strength and stability more economically than filling and reinforcing all voids. Typically, structures made of CMUs will have the top course of blocks in the walls filled with concrete and tied together with steel reinforcement to form a bond beam. [[Bond beam]]s are often a requirement of modern [[building code]]s and controls. Another type of steel reinforcement referred to as [[ladder-reinforcement]], can also be embedded in horizontal mortar joints of concrete block walls. The introduction of steel reinforcement generally results in a CMU wall having much greater lateral and tensile strength than unreinforced walls.

"Architectural masonry is the evolvement of standard concrete masonry blocks into aesthetically pleasing concrete masonry units (CMUs)".<ref>{{Cite web|title=Architectural Concrete Masonry Units |url=https://ncma.org/resource/architectural-concrete-masonry-units/|access-date=2020-06-18|website=NCMA|language=en-US|archive-date=2020-06-21|archive-url=https://web.archive.org/web/20200621082615/https://ncma.org/resource/architectural-concrete-masonry-units/|url-status=live}}</ref>{{failed verification|date=January 2022}} CMUs can be manufactured to provide a variety of surface appearances. They can be colored during manufacturing or stained or painted after installation. They can be split as part of the manufacturing process, giving the blocks a rough face replicating the appearance of natural stone, such as [[brownstone]]. CMUs may also be scored, ribbed, sandblasted, polished, striated (raked or brushed), include decorative aggregates, be allowed to slump in a controlled fashion during curing, or include several of these techniques in their manufacture to provide a decorative appearance.<ref>{{Cite web |url=http://www.ncma.org/resources/productuse/products/concrete/Pages/GroundFaceUnits%28Burnished,Honed%29.aspx |title=Ground Face Units (Burnished, Honed) |access-date=2009-11-21 |archive-url=https://web.archive.org/web/20090521200939/http://www.ncma.org/resources/productuse/products/concrete/Pages/GroundFaceUnits(Burnished,Honed).aspx |archive-date=2009-05-21 |url-status=dead }}</ref>

"Glazed concrete masonry units are manufactured by bonding a permanent colored facing (typically composed of polyester resins, silica sand and various other chemicals) to a concrete masonry unit, providing a smooth impervious surface."<ref>{{cite web |url=http://www.ncma.org/resources/productuse/products/concrete/Pages/Glazed%28Prefaced%29Units.aspx |title=Glazed (Prefaced) Units |access-date=2009-11-21 |url-status=dead |archive-url=https://web.archive.org/web/20090521200923/http://www.ncma.org/resources/productuse/products/concrete/Pages/Glazed%28Prefaced%29Units.aspx |archive-date=2009-05-21 }}</ref>

[[Glass block]] or glass brick are blocks made from glass and provide a translucent to clear vision through the block.