Editing Film crew (section)

=== Camera ===
; [[Camera operator]]
: The camera operator uses the camera at the direction of the cinematographer, director of photography, or the film director to capture the scenes on film or video. Generally, a cinematographer or director of photography does not operate the camera, but sometimes these jobs may be combined.
; [[Focus puller|First assistant camera]]
: The first assistant camera, 1st AC or focus puller, is responsible for keeping the camera in focus as it is shooting, as well as building the camera at the beginning of the day and taking it apart at the end. They also thread the film when a new magazine is loaded.
; [[Clapper loader|Second assistant camera]]
: The second assistant camera, 2nd AC or clapper loader, operates the [[clapperboard]] commonly referred to in the United States as a "slate" at the beginning of each take and loads the raw [[film stock]] or blank videocassette into the camera magazines between takes, if there is no additional specifically designated film loader. The 2nd AC is also in charge of overseeing the meticulously kept notebooks that record when the film stock is received, used, and sent to the lab for processing. Additionally, the 2nd AC oversees organization of camera equipment and transport of the equipment from one shooting location to another.
; Film loader
: The film loader transfers motion picture film from the manufacturer's light-tight canisters to the camera magazines for attachment to the camera by the 2nd AC. After exposure during filming, the loader then removes the film from the magazines and places it back into the light-tight cans for transport to the laboratory. It is the responsibility of the loader to manage the inventory of film and communicate with the 1st AC on the film usage and remaining stock throughout the day. On small production crews, this job is often combined with the 2nd AC. With the prevalence of digital photography, this role is taken on by the digital imaging technician.
; Camera production assistant
: The camera PA, '''camera intern''' or '''camera trainee''', assists the crew while learning the trade of the camera assistant, operator or cinematographer.
; [[Digital imaging technician]]
: On digital photography productions the digital imaging technician, or DIT, is responsible for the coordination of the internal workings of the digital camera. Under the direction of the cinematographer or director of photography, the DIT will make adjustments to the multitude of variables available in most professional digital cameras to creatively or technically manipulate the resulting image. It may also be the responsibility of the DIT to archive and manage the digital data, create compressed dailies from raw footage and prepare all digital images for post-production.
; [[Steadicam]] operator
: A steadicam operator is someone who is skilled at operating a steadicam (trademark for a camera stabilization rig). This person is usually one of the camera operators on the production.
; Motion control technician / Operator
: This technician operates a [[Motion control photography|motion control rig]], which essentially is a 'camera robot' able to consistently repeat camera moves for special effects uses. Motion control rigs are typically rented with an experienced operator.
; Set photographer
: The Set Photographer is the person who creates film stills, still photographic images specifically intended for use in the marketing and publicity.