Editing Valve (section)

===Seat===
[[File:Gordon Power Station Control Valve.jpg|150px|thumb|right|The shut off butterfly valve for a [[Francis turbine]] at [[Gordon Power Station, Tasmania]]]]
[[File:Valve-balls-The-Alloy-Valve-Stockist.jpg|150px|left|thumb|[[Ball valve]]]]

The "seat" is the interior surface of the body which contacts the disc to form a leak-tight seal. In discs that move linearly or swing on a hinge or trunnion, the disc comes into contact with the seat only when the valve is shut. In disks that rotate, the seat is always in contact with the disk, but the area of contact changes as the disc is turned. The seat always remains stationary relative to the body.

Seats are classified by whether they are cut directly into the body, or if they are made of a different material:
*''Hard seats'' are integral to the valve body. Nearly all hard seated metal valves have a small amount of [[leak]]age.
*''Soft seats'' are fitted to the valve body and made of softer materials such as [[PTFE]] or various [[elastomer]]s such as [[Nitrile rubber|NBR]], [[EPDM]], or [[FKM]] depending on the maximum [[operating temperature]].

A closed soft seated valve is much less liable to leak when shut while hard seated valves are more durable. Gate, globe, and check valves are usually hard seated while butterfly, ball, plug, and diaphragm valves are usually soft seated.