Editing Woodcut (section)

==Division of labour==
{{more footnotes|date=February 2018}}
[[File:Formschneider.jpg|thumb|upright|''Block Cutter at Work'' woodcut by [[Jost Amman]], 1568]]
In both Europe and East Asia, traditionally the artist only designed the woodcut, and the block-carving was left to specialist craftsmen, called '''{{lang|de|formschneider}}''' or ''block-cutters'', some of whom became well known in their own right. Among these, the best-known are the 16th-century [[Hieronymus Andreae]] (who also used "Formschneider" as his surname), [[Hans Lützelburger]] and [[Jost de Negker]], all of whom ran workshops and also operated as printers and publishers. The {{lang|de|formschneider}} in turn handed the block on to specialist printers. There were further specialists who made the blank blocks.

This is why woodcuts are sometimes described by museums or books as "designed by" rather than "by" an artist; but most authorities do not use this distinction. The division of labour had the advantage that a trained artist could adapt to the medium relatively easily, without needing to learn the use of [[woodworking]] tools.

There were various methods of transferring the artist's drawn design onto the block for the cutter to follow.  Either the drawing would be made directly onto the block (often whitened first), or a drawing on paper was glued to the block. Either way, the artist's drawing was destroyed during the cutting process. Other methods were used, including tracing.

In both Europe and East Asia in the early 20th century, some artists began to do the whole process themselves. In Japan, this movement was called {{nihongo|''[[sōsaku-hanga]]''|創作版画|creative prints}}, as opposed to {{nihongo|''[[shin-hanga]]''|新版画|new prints}}, a movement that retained traditional methods. In the West, many artists used the easier technique of [[linocut]] instead.